similar to: configuration problem

Hi i have 2 class C 80.97.103.0/24 and 81.180.12.0/24 but i dont konw how to set hashing tables for HTB tc add dev eth0 parent 1: prio 0 handle 1: protocol ip u32 divisor 256 tc add dev eth0 parent 1: prio 0 protocol ip u32 match src 80.97.103.0/24 hashkey mask 0x000000FF at 12 link 1: but i want 2 hashkey for 80.97.103.0/24 and for 81.180.12.0/24 can somebody help me ? this is a part fo my

Hello! I have a quite complicated setup. In my network on each interface there is bandwidth limitation for each user. Booth outgoing (on interface itself) and incoming (attached IMQ) traffic. There is main HTB class which limits bandwidth for whole interface and HTB subclasses for each user. Filtering is done with hashing filters. This setup was working correctly. But now in the network I

Hi. The configuration script is at the bottom. My configuration looks similar to this: imq0 | 1:1 (12mbit) | 1:2 (10mbit) | 3:0 | 3:1 (256kbit) / \ 3:2 3:3 icmp (rest) both 3:2 and 3:3 have rate 1kbit ceil 256kbit Icmp bucklet have priority 1 (better), "rest" bucklet have prio 2 (worse) I tested the script with heavy download

Hi all, I just recently began using HTB to try and manage bandwidth for my network. This is the script I''m using: /sbin/iptables -t mangle -A FORWARD -o eth1 -s ! 192.168.244.2 -j MARK --set-mark 53 tc qdisc add dev eth1 root handle 1: htb default 20 tc class add dev eth1 parent 1: classid 1:1 htb rate 100mbit burst 131072k quantum 59000 tc class add dev eth1 parent 1:1 classid 1:10

Hi all. I have a bridge running Linux 2.4.24 that I use as a bandwidth manager on a broadband wireless network. I''m using HTB and SFQ to prioritize that share bandwidth on a per-cell basis. My IP tables rules divide the traffic based on IPand traffic type (using layer-7 filter and ipp2p). My goal is to make sure that p2p traffic on the network doesn''t sink all of the

Hi Devik/Patrik, In setting up IMQ/HTB with a GRE Tunnel I''m constantly getting kernel errors: [root@linux /root]# dmesg ... ... ... NET: XXX messages suppressed. Dead loop on virtual device gre1, fix it urgently! ... ... ... This I get only if I''m going to start cross device b/w control. If I remove iptables rule iptables -t mangle -D POSTROUTING -j IMQ then no such warning

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

Hi Stef, Sorry to write to you directly but my list membership is not working, I receive the archive but cant send to the list, cant delete myself because I don''t exist and can''t rejoin as they say I do exist, anyway hope you don''t mind Can you tell me what the difference between these two scripts is please. What I want to achieve is a high speed channel 1000kbit from

it is posible to do more than 2048 filter rules and classes like this: /sbin/tc class add dev eth1 parent 1:15 classid 1:101 htb rate 1kbit ceil 6128kbit prio 1 quantum 1500 /sbin/tc filter add dev eth1 protocol ip pref 0 parent 1: u32 match ip dst 10.10.24.17 flowid 1:101 /sbin/tc qdisc add dev eth1 parent 1:101 handle 101: sfq /sbin/tc class add dev eth1

We have been using HTB for last 10-11 months without any problem. But from last few days we have been facing huge packet loss when we turn on traffic shaping using HTB. I upgraded to 2.4.24 kernel (without any htb patch), still there is same problem. Avg. traffic is around 2Mbps and 4Mbps at peak hours. There are around 110 HTB classes and SFQ attached to each class. We are using 4 port Tulip

Hello, I have problems with htb. The problem is that when I download any file via shaper with htb, the traffic is very dinamic, it jumps, for example: if i have set ceil = 128kbit the results that it jumps from 112kbps to 144kbps or smth like that maybe its not very bad, but when the traffic drops down to 40kbps or less and then after 1 or 2 seconds jumps to 144kbps, its bad :-( and it is often.

Hi When I list all the qdisc with tc command it is not possible to see the parent of the qdisc. An example by the book. # tc qdisc add dev eth0 root handle 1: htb default 30 # tc class add dev eth0 parent 1: classid 1:1 htb rate 6mbit burst 15k # tc class add dev eth0 parent 1:1 classid 1:10 htb rate 5mbit burst 15k # tc class add dev eth0 parent 1:1 classid 1:20 htb rate 3mbit ceil 6mbit

Hi all ! I''m building a network appliance whose goals are to enhance Voip quality on 512/128k DSL links. But, i have a voice quality problem, and i think i''m doing something wrong, but i can''t find what. Please excuse my terrible english, i''m french. >From what i''ve read, tc is the tool i need. I read the documentations, readmes and lartc.org

when i want to run a application nothing heapens i try in terminal and she give this messsage wine start utorrent.exe fixme:exec:SHELL_execute flags ignored: 0x00000100 Application could not be started, or no application associated with the specified file. ShellExecuteEx failed: File not found -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I''m trying to setup htb on a box with the following class configuration: class htb 1:2 root rate 4Mbit ceil 4Mbit burst 2099b/8 mpu 0b overhead 0b cburst 2099b/8 mpu 0b overhead 0b level 7 Sent 0 bytes 0 pkts (dropped 0, overlimits 0 requeues 0) lended: 0 borrowed: 0 giants: 0 tokens: 4300 ctokens: 4300 class htb 1:4 parent 1:2 leaf 4: prio 7 quantum 1000 rate 1Kbit ceil

I''ve done some tests with TC FILTER and his PRIO and think that is an error or OMISION on TC FILTER DOCUMENTATION from: http://lartc.org/howto/lartc.qdisc.filters.html#AEN1100 Let''s say we have a PRIO qdisc called ''10:'' which contains three classes, and we want to assign all traffic from and to port 22 to the highest priority band, the filters would be:

Hi I have setup iproute2 and need a bit of help reading the stats from it ===== output qdisc htb 1: r2q 10 default 20 direct_packets_stat 0 ver 3.17 Sent 547326809 bytes 1342627 pkts (dropped 9303, overlimits 2817572 requeues 0) backlog 46p qdisc sfq 10: limit 128p quantum 1514b flows 128/1024 perturb 10sec Sent 41874343 bytes 730889 pkts (dropped 0, overlimits 0 requeues 0) qdisc sfq

Dear all, I want to make a filter for all IRC-Dalnet traffic, so I want to put all traffic for port 6660, 6661, 6662, 6663, 6664, 6665, 6666, 6667, 6668, 6669, 7000, 7001, 7002, and 8000 to a class. So, I create a TC script as below. I''m sure, it is not effective, and we can write it in simpler. I need help, how to make my script below are simpler. The simpler, the better. Thank you

hello, i have a config that is with a large domain of rate, from 2kb to 40Mb and i have some problems with i don''t know how to deal with. so here are some classes 2 with q=1000, one with q 200000 and one with q=6400, all have been calculated by htb, in the code i speficien just rate,ceil, no quantum, no r2q, no bursts ($tc class add $IF_INT parent 1:2 classid 1:21 htb rate

Correct me if I''m wrong, I just want to help my friend who needs a tc solution with fairness to hosts on a 512K/s DSL line, but few of them should be restricted to 64K/s I thought about htb + esfq (sfq with ip based fairness, not connection) parent class with CEIL=500Kbit (no RULE? see *1) and attached esfq to this parent class, now child class with CEIL=64Kbit and RULE=10.0.0.1