similar to: Collect iproute2 traffic stat

i''ve installed mrtg to make graphics of the trafic from the interfece throw the snmpd, and the same with ipac witch put iptables accounting rules colect them and store, and gets the output, but the "problem" is that ipac graphics are 3 times smaller that the snmpd. Why??? i did catch all the trafic with ipac so no problem here, and i know that ipac/iptables is at level 3, and

Hi guys, I''m new to TC HTB traffic shaping.... I installed it at my first try on my Bearing Leaf Router/Firewall I use the tc -s class show dev eth? To see my output All looks dandy and nice, but it''s figures, of which at current momment looks like French to me, I would like to see exactly what these figures looks like in a GRAPH style... I know I can use MRTG, I do have

Hi, I want to see bandwidth every ip address in the local network that passing my linux gateway in the console, may be it''s similar like mrtg (web based version) It''s possible ? Best regards, >--<Kristiadi Himawan>--<

Hi I''ve patched net-mrtg http://www.net-snmp.org/ with http://x-ray.prokon.cz/data/snmp/ sucefully Also I''ve copied QOS.TXT to /usr/local/share/snmp/mibs when I make a normal use of snmp, with mrtg in order to monitor all traffic on eth0 and eth1, it works OK. But, how must I do in order to get monitor for a specific class ? If I make a snmpwalk (like README suggest), I get

the question is simple. can i shape ppp interfaces using htb? thanx regards lucas -- ___ /\ \ __ __ _______ _____ _____ \ \ \ /\ \ /\ \ / _____\ / ____ \ /\ ___\ \ \ \_____\ \ \\_| \\ \____/_ /\ __ \\ \ ____ \ \ \_______\\ \______ / \ ______\\ \__\_/\__\\//\_____\ \/_______/ \/_____ / \/______/ \/__/ \/__/ \/_____/

Hi, can any body suggest any tool which can show the utilisation for individual classes for HTB. preferable written in C/or shell script. Regards Jayesh ------------------------------------------------- Still single? Click here to find the perfect match. http://www.bharatmatrimony.com/cgi-bin/bmclicks1.cgi?141

Hi, Steff. Next file are not found on your website: http://www.docum.org/stef.coene/qos/tc-snmp//example/html/mrtg.cfg can you post it ? Thank you ! Andres _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi! I answer to two messages from this thread (I use digest). lartc-request@mailman.ds9a.nl wrote: > > Message: 3 > Date: Fri, 16 Jul 2004 10:51:37 -0700 (PDT) > From: ibro tj <ibb_linux@yahoo.com> > Subject: Re: [LARTC] QoS for Voip. > To: lartc@mailman.ds9a.nl, alessandro.ren@opservices.com.br > > Hi, > > the hint from Martin A Brown which I am

The latest iproute2 software on its site ftp://ftp.inr.ac.ru/ip-routing/ is from 2002 iproute2-2.4.7-now-ss020116-try and even that is marked with "try" ... since then we''ve seen a lot of patches for it, some solving bugs some adding support for HTB, esfq, hfsc, wirr etc. I think, someone mentioned on this list that he has collected all the patches and updates for iproute2 ...

I have successfully implemented a QoS system using HTB on a 2Mb/s leased line and it works very well, but I would like to be able to graph the three pipes to see what they are doing, eg: using MRTG or similar. Has anyone any experience or examples of how to do this please? Thanks, Chris _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl

A new version of the iproute2 utilities is available to handle the new extensions for 2.6.7. * Based on the last known good version of iproute2 from Alexy * Included most of the vendor patches (except for the stupid ones). * Got rid of lots of the glibc workarounds, I intend this to build and run on 2.6 (and 2.4) only. * Fixed some parsing and formatting bugs. * Added gigabit as a rate.

We run a Hosting farm behind a bridge/iptables firewall setup running Gentoo with kernel 2.4.20-gentoo-r6, connected to a dual 15Mbps international internet pipe / , as this: Net Pipe --------- eth1 Bridge/Firewall eth0 -------- Internal Hosting Network lately we have been looking at htb to somehow control excessive usage from the users behind, but in our implementation there seems to be an

Does anybody know a good ip traffic monitoring software that has multiuser capability? I need some type of software with an interface on which users can login with their user/pass and see how much traffic (how many megabytes) they consumed over a certain period of time. Speed graphs are NOT a must, just something to show them hou much traffic they did. I''m currently using net-acct mysql

Is there an other place than www.docum.org where one could get monitor_tc.pl? Docum.org seems to be down. Peter -- The bogosity meter just pegged.

Hi ! I´ve been using the wonderful wondershaper from chapter 15.8 of the LARTC Howto for some time. It´s really wonderful. Actually, I use the version from http://freshmeat.net/projects/wshaper/?topic_id=87 Now I tried to put some hosts to low priority, and it doesn´t work. The traffic is splitted equally between the noprio and the other hosts. Is this because I use ip masquerading, and all

Hi All :))) Sorry for my very lame english :) I from Russia... I have correct smb.conf for cyrrilic symbols in filenames... it work with all version of samba exlude 2.1.0prealpha :((( Linux - RedHat 6.0 (kernel 2.2.10 compiled with smp) 1) in smb.conf : client code page = 866 character set = koi8-r ... check /etc/codepages/codepage.866 - Ok... 2) smbclient //localhost/test -U test > mkdir

Hi all, After a long reading of the LARTC, I were able to set up a working HTB config on my firewall. But my question is : Can I use a "ip less" box to do QoS ? With bridging software (or even without?) or thing like this and use an u32 filter to direct the traffic to the right class ? In other words, I can''t modify the existing network config or inster into (netmask is

Greetings all, I''ve been searching high and low for any inkling of how people are monitoring classes for long term usage data. I''m thinking something along a script to collect the data for mrtg or perhaps even an snmp module that would present them as interfaces to be polled....has anyone done any work in this area? John Dunning Assistant Director Net & Tech Svcs Wayne

Hi, I am trying to compile "iproute2" (iproute2-2.4.7-now-ss020116-try.tar.gz, inclusively the latest HTB patch, activated diffserv components) on a SuSE-Linux 8.2 system (using "gcc 3.3", system based on "glibc 2.3.2"). It is no problem as long as I use the kernel header files of linux-2.4.20 (vanilla), linux-2.4.20.SuSE (special kernel patched by SuSE, shipped

Hi, My HTB shaping is working perfectly, and i have setup a bridge and hosts behind the bridge are now getting only the bandwidth they are supposed to get. Thanks to every one here for helping me out :) Now I am thinking of making a graph of traffic going through various classes. Is their any thing readily available for it, or is parsing the output if tc and passing it to rrdtool the