Displaying 20 results from an estimated 5000 matches similar to: "Wondershaper"
2003 Jan 13
1
Getting Error when starting Wondershaper 1.1a
Hello,
i´ve installed a Suse 8.1 minimal System with iproute 2.4.7 and iptables, Suse default Kernel 2.4.19.
When I start the Wondershaper 1.1a Script I get the following Error:
CBQ: "allot" is required to set WRR parameters.
/home/skripte/./wshaper: line 72: allot: command not found
CBQ: "allot" is required to set WRR parameters.
/home/skripte/./wshaper: line 78: allot:
2002 Dec 17
5
WonderShaper on LAN link kills to-host speed
I tried installing the WonderShaper on my internal link, mostly to get the
SFQ installed. I set uplink and downlink to 100000 to match the link speed
and changed the bandwidth on the cbq line to 100mbit. This killed transfer
speed *to* the box, knocking it from 30-40 Mbps down to about 800 kbps.
Commenting out just the ingress control restored the speed.
What about the ingress policer would do
2003 May 28
2
wondershaper htb P2P downloads
Sir,
Thanks for the wondershaper utility!
It has improved the response time for my ssh connections to my home
server whenever i need to access it from the Internet.
However, is there a way to setup a bandwidth, say 10kbits/sec (i only
have 128kbits/sec DSL), and assign it to a particular traffic type like
kazaa and other P2P file-sharing?
This way it will guarantee that my home users of
2003 Sep 09
5
newbie - shaping a PSTN connection
Hi - I''ve been going through the LARTC how-to and have successfully used the
sample scripts (and wondershaper) with my xDSL links.
I''m now faced with the challenge of providing 8 users at work an effective
remote access connection over a PSTN ppp connection. The critical traffic in
this case relates to our stock enquiry application which is running over
terminal services.
2002 Dec 07
4
Why my script doesn''t work ???
Hi All,
I''m using iptables-1.2.7a on RedHat8 kernel 2.4.20.
I wanted to limit the file-sharing traffic to the internet.
I marked the packets with iptables:
iptables -A FORWARD -t mangle -p tcp -s 192.168.1.1/24 -d !
192.168.1.1/24 --dport 1024:1862 -j MARK --set-mark 1
iptables -A FORWARD -t mangle -p tcp -s 192.168.1.1/24 -d !
192.168.1.1/24 --dport 1864:65535 -j MARK --set-mark 1
2002 Dec 03
4
Multiple classes
I''m trying to implement something similar the the diagram in section
9.5.2.1 in the LARTC HOWTO, but must have missed something somewhere :(
I''m trying to hack up wondershaper, as it looked like a good place to
start.. Here''s where I currently at, but I''ve tried alot of different
things, all failing, some worse than others. The end result is to throttle
back 126
2003 Dec 03
12
$100 USD to the first person that can provide the rules/scripts that will solve the QOS latency & bandwidth allocation issue !!!!
To stress the urgency and importance of my questions, I am willing to
pay $100 to the first person that can provide me with the scripts/ rules
that will work in my SnapGear firewalls that will solve the problems I
am having.
Please see the following post:
Linux QOS and prioritization of real-time data (RTP/VoIP)
Thank you!
2003 Jan 21
2
Newbie help needed after upgrade to mdk9.0
Hello!
I recently upgraded my computer from Mandrake 8.2 to Mandrake 9.0.
I used a very slightly modifed WonderShaper and it worked beautifully.
But now when I try to run the same cbq shaping script on Mandrake 9.0 i
get this output
RTNETLINK answers: Invalid argument
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or
2002 Oct 15
1
Réf . : Re: trying to use wondershaper on a dedicated line (not adsl)
here''s the output :
# tc -s -d class show dev eth0
class cbq 1: root rate 10Mbit cell 8b (bounded,isolated) prio
no-transmit/8 weight 10Mbit allot 1514b
level 2 ewma 5 avpkt 1000b maxidle 23us
Sent 294 bytes 7 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 605 undertime 0
class cbq 1:10 parent 1:1 leaf 10: rate 100Kbit cell 8b prio 1/1 weight
100Kbit allot 1600b
2002 Nov 24
2
Extending Wondershaper a bit
Hello everyone.
I''ve been trying to get Qos to work here for two days now, but it REALLY
doesn''t seem to work the way I want to. Here is my situation:
Internet
Wireless LAN Firewall DMZ
Local lan
As you can see, I got a Debian box in the middle as my firewall with 3
network interfaces and a wireless one. I use
2004 Jun 10
6
Shaping incoming traffic on the other interface
Hi,
I have a typical configuration for my firewall/gateway box: single network card, with a pppoe
connection to the DSL modem.
I''m already successfully shaping the uplink (how come that the wondershaper.htb doesn''t use the ceil
parameter? It should implement bandwidth borrowing!) but i found the ingress policy a little bit rough.
I''d like to keep the traffic categories
2003 Aug 05
3
ensure game server latency
Hi group,
first of all: I am new to this group and hope to bring in some value
later. At the moment I am such a beginner that I will probably of no
use to anyone and only be asking stupid questions...
I am running a little private linux server with kernel 2.4.21.
It serves as a gameserver, webserver and mailserver, mainly.
It also does the pppoe connect via a DSL modem to my provider and the
NAT
2004 Jan 19
4
tool to monitor HTB class utilisation
Hi,
can any body suggest any tool which can show the utilisation for individual classes for HTB.
preferable written in C/or shell script.
Regards
Jayesh
-------------------------------------------------
Still single? Click here to find the perfect match.
http://www.bharatmatrimony.com/cgi-bin/bmclicks1.cgi?141
2004 Dec 17
4
jdg-qos-script on FC3
Hello,
Has anyone had any luck compiling Alexander''s QOS script on a vanilla FC3 or
FC2 box?
I just cant seem to get the darn thing to port right.
Regards,
Bryan
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
2004 Jan 31
6
HTB dequeueing in pairs fixed
I posted earlier when I noticed that htb was releasing packets in pairs,
even though my burst/quantums were 1 pkt.
To fix I set HTB_HYSTERESIS 0 in net/sched/sch_htb.c .
This gives a noticable gain in upstream worst case latency, for me with
256kbit/s up I used to see +90 sometimes, now it''s +45. For the many who
have 128 up it should limit them to +90 rather than +180.
Andy.
2003 Apr 08
1
Configuration help
I have been reading lartc.org for the past few days and am a bit
overwhelemed by the possibilities and configurations that are
possible. I am still trying to process all of this to try and
understand what I need to do in my configuration, and have tried a few
things to no avail. I currently have a webserver that is completely
flooding our link, so I need to find a way to deal with this quickly.
2004 Jan 04
6
HTB filters - pls help me
Hi,
we r using HTB algorithm,for traffic shaping, we are facing a problem.
we are able to create multiple classes,filters. But when we delete 1 filter all filter gets deleted. how do we avoid that.
waiting for you reply
Regards
Jayesh
-------------------------------------------------
Shop & Save at Sifymall.com!
Special Festive Offers - up to 60% off on DVD players, MP3 Players.
Mobile
2003 Jun 14
15
herz the script that i have done.
Hello there,
Having made quite a lot of expensive mistakes i have finally clobbered
together a script for the users on my network.
Have a look at it and please suggest as to how can i limit bandwidth to
each ip on this network to about 64Kbits.
Trevor
--
( >- GNU/LINUX, It''s all about CHOICE -< )
/~\ __ trevor@clovertechnologies.com __ /~\
| \) / Pre Sales
2003 Aug 20
9
CBQ_bandwidth
Hi Stef,
Reffering to page < http://www.docum.org/stef.coene/qos/faq/cache/7.html
> I found a para as follows,
" CBQ is not always as accurate as it should be. See docum.org on the
test page for some tests with bounded classes. The algorithm used by cbq
is very "link sensitive". It calculates the link idle time and for that
it needs the real link bandwidth, average
2002 May 08
5
how to clean "tc" configure
tc qdisc add dev eth0 root sfq perturb 10
I want to set perturb to 8
then i used this
tc qdisc add dev eth0 root sfq perturb 8
system give me the following message
RTNETLINK file exists
I delete the rule by this :"tc qdisc del dev eth0 root
sfq perturb 10"
please tell me how can i delete the rule by another
way
and where is "RTNETLINK file"