similar to: Weird(?) HTB3 setup

What is the best way to temporarily setup a port relay. I'm trying to diagnose a problem with Cisco's latest VPN client and need to determine if the problem is port number related. e.g. VPN client---------23-(Linux box to relay port)-------xx-(Telnet server) (Keep in mind this is temporary and for debugging purposes) Thanks, Frank M. Ramaekers Jr. Systems Programmer

Hi guys, Can you take a look at this? :) +-----------+ | | eth1-|- | | -|-eth0---LAN--- | | eth2-|- | | | +-----------+ - eth0 is connected to the LAN having the IP=LAN_IP eth1 is connected to the first ISP having IP=ISP_IP_1 and GW=ISP_GW_1 eth2 is connected to the second ISP having IP=ISP_IP_2 and GW=ISP_GW_2 I need

hi all, i want to try htb3 with imq downloaded & patched imq & htb3 with kernel-2.4.18 on rh7.2 but got STUCK on step 1 :( this are what i did can anyone guide me what went wrong on the first step itself !! [root@cab1 root]# modprobe imq numdevs=1 modprobe: Can''t locate module imq [root@cab1 root]# [root@cab1 root]# tc qdisc add dev imq0 handle 1: root htb default 1 Cannot find

Hello All, at http://luxik.cdi.cz/~devik/qos/htb/ is info about new beta and also download (now in TGZ too). You also (really) want to see performance analysis of HTB,CBQ and HTB3 at http://luxik.cdi.cz/~devik/qos/htb/v3/cbqhtb3perf.htm I need testers ! Test you old setups and let me know about problems. enjoy, devik

Hi, I use for a customer a Linux router/firewall with 1 internal interface connected to the LAN and 3 external interfaces connected to 3 different ISP. I use a kernel 2.6.17 with a routes patch from Julian Anastasov. I mark outgoing FTP traffic for the routing. With the rules below I do not have a problem with the active/normal FTP to connect on FTP server. But the passive FTP does not pass

Hi all, I want to divide the incoming traffic between what should go to the firewall and what should be forwarded to the local network behind it. I started with the IMQ example config, but added an extra htb class right below "10:1" to get the two sfq''s to borrow each other''s bandwidth. However, I can''t figure out how to set the two marks. According to this

Hi! I have read all informations i could find, but some things are still not clear. My setup is: ---INTERNET1(eth0)-\ /- Local net1 (eth2) GW ---INTERNET2(eth1)-/ \- Local net2 (eth3) I have NAT and a working setup using HTB,SFQ, classifying with the iptables -j CLASSIFY way. I shape only the traffic coming from the internet heading to the intranet. I would like

Hello! I need to switch from htb2 to htb3, because of speed issues (for me, htb2 is unable to handle more then 100mbit duplex with ~550 classes), kernel profiling shows htb_dequeue_prio at 1st place with 3x isolation. So, I''ve moved from 2.4.19 to 2.4.25 kernel (hi-pac for classification/marking and htb3 for queueing), and traffic rate drop from 100 to 20mbit. What can be wrong? The

Hi guys, i have a problem with a configuration what i''m trying to do. I have two computers with linux, A and B, connected in the same network with this configuration: PC1 A: 192.168.192.1 PC2 B: 192.168.192.30 The PC1 A is a firewall doing nat... this one is connected to the internet via an adsl modem and of course it have its own public ip , and the router B is a smtp server but

Hi everyone, I am having problems with "oopses" since I introduced HTB on my company''s PC-based routers. It seems that only routers with high network load are affected. The average network load on the two most problematic routers are 10Mbps in/out and 2.5Mbps in/out. The other machines with less than 1Mbps average traffic seems unaffected. We have been getting oopses on

Hello, I have finished setting up the load balancer with IPROUTE ... also patch the kernel to support DGD and now it''s working fine with the valuable guide at LARTC website, Julian Anastasov, and the kind people in this mailing list. Now I would like to launch a web server and a ftp server to the public but I''m stuck into a problem and really need your help. Currently internal

Hi ; MY script: tc-htb3 qdisc del dev eth2 root ipchains -F tc-htb3 qdisc add dev eth2 root handle 10: htb default 20 r2q 40 tc-htb3 class add dev eth2 parent 10: classid 10:1 htb rate 50Mbit burst 2000 tc-htb3 class add dev eth2 parent 10:1 classid 10:100 htb rate 12mbit ceil 50mbit prio 1 tc-htb3 class add dev eth2 parent 10:1 classid 10:20 htb rate 38mbit ceil 50Mbit prio 8 ipchains

Hi ; +--------+ +-----------+ +--------+ | server |---------- | linux box |---------------------| Client | +--------+ +-----------+ +--------+ MY script: tc-htb3 qdisc del dev eth1 root ipchains -F tc-htb3 qdisc add dev eth1 root handle 10: htb default 20 r2q 40 tc-htb3 class add dev eth1 parent 10: classid 10:1 htb

Hi folks... I'm configuring Firewall in the server running Conectiva Linux 6.0 (Brazil) and I already configured to accept connections in the ports: netbios-ns 137/tcp # NETBIOS Name Service netbios-ns 137/udp netbios-dgm 138/tcp # NETBIOS Datagram Service netbios-dgm 138/udp netbios-ssn 139/tcp

https://bugzilla.netfilter.org/bugzilla/show_bug.cgi?id=554 Summary: Packet illegaly bypassing SNAT Product: netfilter/iptables Version: linux-2.6.x Platform: All OS/Version: All Status: NEW Severity: major Priority: P2 Component: NAT AssignedTo: laforge@netfilter.org ReportedBy:

mdew:~# tc qdisc add dev imq0 handle 1: root htb default 12 r2q 1 Cannot find device "imq0" mdew:~# lsmod Module Size Used by Not tainted ipt_REDIRECT 728 0 (autoclean) ipt_MARK 728 2 (autoclean) iptable_mangle 2100 1 (autoclean) ipt_REJECT 2712 4 (autoclean) iptable_filter 1672 1 (autoclean)

Hello, I''m using htb3 with kernel 2.6.13 on debian testing release. I have a hierarchy consisting of 10 parents clas each with 2 to 20 childs and every child use sfq. The problem is when the default class become congested, the system start to drop packets for 2 seconds all traffic is blocked, another 3 to 5 minutes all goes all and so on. Anyone have any ideea about this ?

Hello, I have been searching for HTB theory documentation and found two interesting sources - Devik''s page and docum.org FAQ. In some places they are contradictory which make me think that Devik''s theoretic document (marked "actual") is just too old and does not reflect the latest changes. After reading http://www.docum.org/docum.org/faq/cache/30.html and others, I

Hello all, I am compiling a 2.4.19 kernel. I downloaded the kernel source from familiar project, which is a project working on porting linux to ipaq handheld devices. The question I have is what patch should I apply: htb3 or htb2? Also, I looked into htb3 patch. There are the source for sch_htb.c and some definitions that should be added to pkt_sch.h. I already have a sch_htb.c in my kernel

Hello, I''ve installed htb3 on my simple config (htb + sfq) . Something is now complaining that quantum is too small and suggest that r2q be changed. There seems to be no documentation on this. Ideas anyone? Regards John