similar to: Can we get a newer version of madwifi on rpmforge?

hi all, this is my first hit on the mailing list. hope i m posting in the right place. well, i have a dell vostro 1510 laptop with broadcom wifi adapter. n it doesnt work! :( i installed the wifi drivers with ndiswrapper. iwconfig shows the following. [root at laptop ~]# iwconfig lo no wireless extensions. eth0 no wireless extensions. sit0 no wireless extensions. wlan0

Hello, I just installed Centos 5.2 on my wife's IBM thinkpad T41 with Atheros wireless. It looks like I need to install madwifi to get the wireless to work. Our home wireless network uses WPA2 I found the EL5 rpms at atrpms, but there is no madwifi-kmdl rpms for kernel 2.6.18-92.1.6.el5. So, to get the wireless working on my home network, what's the shortest path from here? Install

I have not installed the madwifi specific kernel stuff (kdml and hal-kdml) from atrpms. I have installed with wpa rpms. And my Atheros card is working with almost no work on my part (other than runing wpa_supplicant as a deamon). Nice!

I rebuilt my notebook that has the atheros card in it, and forgot to save all of my setup to get it working. I am using dkms and the madwifi rpms from rpmforge. My modprobe.conf has a line: alias wifi0 ath_pci I can ifconfig wifi0 up But the command: /usr/sbin/wpa_supplicant wpa_supplicant -dd -D madwifi -i wifi0 -c /etc/wpa_supplicant/wpa_supplicant.conf fails. Now some of my old

hi . i installed madwifi on 5.2 x64 but it dosent seem to be working any clues? pls help :) -- -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20090410/f63cf28a/attachment-0002.html>

Hi list, The crux of my setup is given in the Subject: field. I''m using Xen 3.0.3 (release) on a VIA Nehemiah chipset with Linux 2.6.16.29 in both dom0 and domU. Because the documentation on PCI passthrough is a bit sparse, I''m turning to the mailing list.. hopefully you guys have some input. My goal is to set up a system where: * 1 domU VM runs at a time. * The VM can be

I have a atheros wiifi card on my Centos 5 that I use as a access point using hostapd. I noticed that after the upgrade to kernel 2.6.18-128 or above, the atheros driver comes with the kernel, ath5k, and it does?t let hostpad ou iwconfig set master mode on the card. Up to kernel 2.6.18-92 is workedd just fine using madwifi from rpmforge. Any ideas on that? Tks.

Dear All, I'm having trouble on 2 laptops Lenovo B580 since upgrading to Centos6.5. ( Because it's a Lenovo I cannot switch the network card for a better supported network card. ) There on the latest kernel : root at jac network-scripts]# uname -a Linux jac.cawdekempen 2.6.32-431.1.2.0.1.el6.x86_64 #1 SMP Fri Dec 13 13:06:13 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux With the help of

Hi all, I am trying to compile madwifi for CentOS-4 without success. Error is: Checking if all requirements are met... ok. mkdir -p ./symbols for i in ./ath_hal ath_rate/onoe ./net80211 ./ath; do \ (cd $i; make) || exit 1; \ done make[1]: Entering directory `/usr/src/madwifi/ath_hal'' make -C /lib/modules/2.6.9-5.0.3.ELsmp/build SUBDIRS=/usr/src/madwifi/ath_hal

Kudzu is not recognizing my Atheros card. Actually I was having this problem with the plus kernel and I fell back to 2.6.9-34.0.2 Running on ethernet until I can figure out what to update.

hi all, I am new to Xen. I tried to install it from binary, which worked well. I need to have my atheros card woking in domain 0, so I decided to install it from sources, to get Linux kernel patched by xen patches, wchich I could use to compile madwifi drivers. So I did. I donloaded sources for xen 3.0.3, run make world, it donloaded needed 2.6.16.29 vanilla kernel from kernel.org, patched it,

Interesting situation: First my system - HP NC4010, with Atheros pci mini card. Latest MadWiFi drivers from: http://atrpms.net/dist/el4/madwifi/ and wpa from: http://atrpms.net/dist/el4/wpa_supplicant/ I had just the madwifi working back in Jul at the IETF conference. But as open only. I had upgraded to the plus kernel, thinking it would get my internal SD card reader working (it

I know, I know... don't use the non-standard kernels unless you have to... BUT: I have a D-Link N150 USB card. Bus 001 Device 004: ID 0846:9030 NetGear, Inc. WNA1100 Wireless-N 150 [Atheros AR9271] This isn't supported in C5, but it is supported in newer kernels (ath9k_htc). So let's try NDISwrapper: # rpm -i kmod\-ndiswrapper\-1.56\-1.el5.elrepo.i686.rpm

Hello Pkg-xen-devel list, I am running lenny with xen-linux-system-2.6.18-4-xen-686 (xen 3.0.3) installed. I'd like to put this server in the cupboard and access it via wifi. To build the wifi kernel module, it should hopefully go like this : apt-get install madwifi-source madwifi-tools m-a a-i madwifi modprobe ath_pci ... Except that I do not have the sources nor the headers of my kernel.

I am trying to understand Suspend 2 and what I have to do to get it working in Centos 5. There is quite a bit for it at ATrpms: http://www.atrpms.net/dist/el5/hibernate-suspend2/ http://www.atrpms.net/dist/el5/kernel-suspend2/ The later is the kernel patches that they refer to at the Suspend2 website, so I don't have to recompile the kernel? I noticed that over at:

I have been playing around with 3 ath based FreeBSD boxes and seem to have got everything going via WPA and a common PSK for 802.11x auth. However, I want to have a bit more certainty about things working properly. What tools do people recommend for sniffing and checking a wireless network ? In terms of IDS, is there any way to see if people are trying to bruteforce the network ? I see

I've just acquired a use IBM Thinkpad R40 model 2722-GDM. I'm contemplating what to run on it, and longer-term the likely candidates are: Centos 5 SLE{D,S} 10 OpenSUSE 10.2 Kubuntu - the latest. Kubuntu - Long Life (aka 6.04, Dapper, ...) I've booted Knoppix 4 in it and most seems well, including the Atheros Wireless card Windows can't find. The major flies in the

My OQO boxes have the AR5413 wifi chipset, so for the first time in quite a while, I again need to run madwifi. So I went looking for the dkms madwifi rpms, but could not find them. They use to be on rpmforge, as I recall. dkms is there. So have I lost some memory cells or have these rpms taken a hike?

Hi, i have problem with madwifi driver (ath_pci) version 0.9.4 ,on CentOs5.1after hibernate wireless devices are not working - i need to restart them (ifconfig down/ up or network restart). Is there any solution? i am using acpid script which will hibernate on power off button pressed. It is just /usr/sbin/pm-hibernate Thanks in advance! D. -------------- next part -------------- An HTML

What's the easiest path to having my Atheros wireless cards supported, particularly in C5? In the past, I've chosen to download source and build my own, but that's become a little tiresome. At one point, OpenSUSE was the easy option, but since 10.1 it's dropped madwifi. -- Cheers John -- spambait 1aaaaaaa at coco.merseine.nu Z1aaaaaaa at coco.merseine.nu Please do not