similar to: Multiple classes

Hello everyone, First of all, sorry for my poor english. I''ve been working with this for a few weeks and I''m getting sick... I''m trying to control the bandwith in my network using the following script. The machine where the script is running makes NAT, eth0 is connected to the router and eth1 is connected to the Lan. When I run the script it doesn''t appear any

I''m streaming audio over a WAN that is 1.5Mbit/s. The audio has to go both ways and can be over tcp or udp. The manufacturers recommend udp as it has less overhead but has a higher chance of dropping out. The audio requires 130-200kbit/s in each direction for a combined 260-400kbit/s. I have two transparent bridges on either side of the WAN to do traffic control. I split it so

>Miguel Ángel Domínguez Durán wrote: >> Hello again, >> First, excuse me for my poor english. >> I''m trying now to make bandwith control in a firewall machine running >> Shorewall. This machine is also a bridge using bridge-utils >> bridge-utils-devel. It is a mandrake 10. The configuration is something >> like >> this: >> >>

Hi folks, I''m trying to shape two clients in my LAN when accessing the internet. Actual situation is that EVERY traffic goes into 1:40, so the client which should fall into 1:30 does not get the lower uplink it should have, but the uplink defined for the client defined as 1:30 When I disable the definition of 1:40, every traffic falls into 1:30 (except for the traffic defined to be in

Hi, I have some interesting problem with htb , I set up root class and sub-classess: $TC qdisc add dev eth0 root handle 1: htb $TC class add dev eth0 parent 1: classid 1:1 htb rate 1990kbit ceil 2000kbit $TC class add dev eth0 parent 1:1 classid 1:10 htb rate 190kbit ceil 200kbit $TC class add dev eth0 parent 1:1 classid 1:11 htb rate 1400kbit ceil 1600kbit $TC class add dev eth0 parent 1:1

Hey all. I''m trying to set up QoS using the HTB qdisc in a very basic setup, but it the example shown in the howto doesn''t seem to be working. While the packets show up in the correct classes, they appear to be completely ignoring the rates, meaning nothing gets shaped. My setup is that I''ve got a a bunch of machines behind my firewall/router: 1.2.3.1

Hi all I have a trouble configuring the qdiscs, when I indicate the "perturb 10" option to tc, i gives me this error: tc qdisc add dev eth0 parent 5:1323 handle 1323 sfq perturb 10 RTNETLINK answers: Invalid argument if I don''t put the "perturb 10" option, it works. another question is about iptables, when I indicate the " --set-mark" option: iptables -t

Hi ! I have a single host which is connected via an 512kbit ADSL link to the n= et. I quite often use some realaudio application that uses some bandwidth = and I want to avoid other traffic to scale that bandwidth down. So I used = some classes (with htb) on imq0 device and applied some filters and it see= ms to work in most cases. However, there are some sites with which downloa= d is

Hi! I have a setup where I want to prefer traffic on one port (for testing purposes I used port 22) my setup is : tc qdisc add dev eth3 root handle 1: htb default 30 tc class add dev eth3 parent 1: classid 1:1 htb rate 96mbit burst 15k tc class add dev eth3 parent 1: classid 1:7 htb rate 2mbit burst 15k tc class add dev eth3 parent 1:1 classid 1:10 htb rate 96mbit burst 15k tc class add dev

Hi! Is it HTB fully compatible with BOND interface? I have this setup (mode= fault tolerance) : BOND0 -> ETH0 + ETH1 BOND1 -> ETH2 + ETH3 ( http://www.kernel.org/pub/linux/kernel/people/marcelo/linux-2.4/Documentation/networking/bonding.txt ) HTB work very well with Class over BOND0. If I add Class for BOND1 it generate balance errors. Also with HTB.init

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

Hi, I can''t get traffic shaping working. This is my situation: -------- ------ Net1 ----- |router| -------------------- | TC | ----------- Net2 -------- leased line ------ eth1 eth0 We use the leased line for normal traffic but also for synchronisation between 2 servers. The leased line is 2mbit. The synchronisation

I`m trying to shape both upload (eth0) and download(eth1). I made this script to acomplishthis but the filters are not working even though the classes and qdiscs are created. What am I doing wrong? #!/bin/bash tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1 htb default 10 r2q 5 tc qdisc del dev eth1 root tc qdisc add dev eth1 root handle 1 htb default 10 r2q 5 tc class add dev

Hello everyone. I''ve been trying to get Qos to work here for two days now, but it REALLY doesn''t seem to work the way I want to. Here is my situation: Internet Wireless LAN Firewall DMZ Local lan As you can see, I got a Debian box in the middle as my firewall with 3 network interfaces and a wireless one. I use

Hi everybody! I''ve been trying with htb and tc filter. It seemed to work fine, but after testing with ethloop I''ve realized that traffic is not being distributed through the leaves as I thought. When sending packets to 1:10 and 1:11 at the same time, there''s no bandwidth sharing. There''s no traffic through 1:11 until traffic through 1:10 has finished. Though

Actually i gave up, i tried and tried and tried so many times, upgrading software falling back to an old version but it didn''t work, that''s it. i can''t do work together tc with iptables and iproute2 when i mark a packet with iptables tc doesn''t recognize them so it falls at the default leaf of the tc''s tree what i like is to mark packets depending on

dear All, I'm a new student and my job is too shapping bandwith for our campus faculty network. I want to implement htb with Redhat-9.0 distro. does this distro kernel support htb and tc good ? or i should apply some patch or upgrade kernel ? regards reza

Hi, machine: AMD K6 200 MHz Linux distribution: Mandrake 8.1 kernel: compiled 2.4.21 applied this: #define PSCHED_CLOCK_SOURCE PSCHED_CPU in file linux/include/net/pkt_sched.h bevore compiled the kernel (described on http://www.docum.org/stef.coene/qos/faq/cache/40.html) bandwitch on eth0: 128kbit The most simple configuration - 122kbit guaranted for WWW (sport 80) and

I''m using htb classes on my firewall to queue traffic and implement different restrictions on different protocols. tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 190 tc class add dev eth0 parent 1: classid 1:3 htb rate 2mbit burst 30k tc class add dev eth0 parent 1:1 classid 1:90 htb rate 50kbit ceil 384kbit burst 5k tc qdisc add dev eth0 parent 1:90 handle

Hi all! I''m new to this list, and hope for some clarity in this matter: I have a home-gateway with linux-2.6.9 and iproute2 (ver:2.6.9). My following tc syntaxes. # eth0 internet scheduleing are: tc qdisc add dev eth0 root handle 1: htb default 20 tc class add dev eth0 parent 1: classid 1:1 htb rate 512kbit burst 6k tc class add dev eth0 parent 1:1 classid 1:10 htb rate 512kbit burst