similar to: warning in HTB... what is this?

hi all, i saw this message today & am reporting it(as it says) [root@cab1 surfNet]# tail -f /var/log/messages Sep 1 04:02:03 cab1 syslogd 1.4.1: restart. Sep 1 09:35:27 cab1 kernel: HTB: mindelay=500, report it please ! [root@cab1 root]# iptables -V iptables v1.2.6a [root@cab1 root]# tc -V tc utility, iproute2-ss020116 [root@cab1 root]# uname -a Linux cab1 2.4.19-r #2 Sun Aug 25 01:49:24

Hello List, I use HTB in a ~80 users serving router with kernel 2.4.20. eth0 is the internet interface (half-duplex 1Mbit), eth1 the internal interface (100Mbit full duplex) cause of the fact that the router also serves as a http-proxy (squid) i thought setting up the default class on eth1 with the real upload-speed (100Mbit) would do the job, i.e. shaping normal stuff to 1Mbit except local

added to http://luxik.cdi.cz/~devik/qos/htb/ FAQ section. ------------------------------- Martin Devera aka devik Linux kernel QoS/HTB maintainer http://luxik.cdi.cz/~devik/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi everybody! I''m using an edge bridge box with two ethernet cards to shape traffic in a WAN link. I''m running Debian 3.1 stable with kernel 2.6.8 and iproute from packages. I recompiled the kernel with the following built-in options: [*] 802.1d Ethernet Bridging [*] QoS and/or fair queueing <*> HTB packet scheduler <*> SFQ queue [*] QoS support

Hello, I have a problem with my samba-server running in a VirtualServer (http://user-mode-linux.sourceforge.net/). Internet | .------------------------------|-----. | LinuxHost | | | eth1=80.x.x.x | | .---------------------. | | | | VirtualServer (UML) | | | | |

CentOS 4.3 (SMP, x86_64, Athlon64 X2) with all pre-4.4 release updates applied. Since I ran into the Yum issue at the previous upgrade, I first did yum upgrade to get the list of packages (6 to install, 206 to update). I then did yum upgrade yum (which passed without issues) yum upgrade sqlite (which passed without isseus). Fairly certain that yum now works correctly, I wanted to just do

Hello, 1. I currently have a 128kbps cable link to the internet..and I''m sharing this connection with others. I''ve made the following script(for alocating bandwidth depending on the services used: browsing, squid, games like counter-strike, icmp, ssh), which unfortunately isn''t working very well as the response times I''m getting upon pinging the server

Hello... Im trying to setup HTB to allow me to shape traffic from two upstreams that meets on single lan0 interface. I prefer to use HTB qdisc within HTB root qdisc for cleaner rules design. Seems that it doesnt work at all. tc -s class show doesnt show any traffic on other classes attached to HTB qdisc. Linux 2.6.20.7 iproute-2.6.20-070313 Weird thing is that tc -s class show that 1: and 2:

Hi I tryed to use a htb qdisc/class on top of another htb qdisc/class as you can see bellow: #!/bin/bash tc="/sbin/tc" $tc qdisc del dev eth0 root $tc qdisc add dev eth0 root handle 1: htb default 40 $tc class add dev eth0 parent 1: classid 1:1 htb rate 100Mbit burst 15k $tc class add dev eth0 parent 1:1 classid 1:10 htb rate 50Mbit burst 15k $tc class add dev eth0 parent 1:1 classid

original at: http://www.praga.org.ar/wacko/DevPraga/htbgen Htb-gen has evolved a lot since it release in feb/2006, but i have no time to make a public decent documented and generalized release. But right now i think that is better to put the stuff here, so others can enjoy the notorious improvements (and maybe someone whants to help out) Lets go to the hacks: I have made 2 flavors of htb-gen

I''m trying to build a QoS system that would divide the outgoing traffic into four categories, each one also subdivided into two more categories. For that I chose a htb root qdisc subdivided into four classes, each of these classes contains also a htb qdisc. Until these point everything goes well, but when I try to attach a new class to the leaf htb qdisc a problem with the sintaxis

Hi, I am new to HTB and in the learning process I want to simulate a slower link on my server to see how qdisc works. I have a 100Mbit connection. I want to simulate a 100K connection and to divide traffic between FTP and SMB. (like in HTB user guide). The problem is that it doesn’t work. I can transfer files with FTP of SAMBA at the wire speed. (Just like when there was no HTB and qdisc).

Hi, everyone I has a ADSL link about 4M bandwidth, and use HTB do bandwidth management. When I config qdisc like below: tc qdisc add dev br0 root handle 1: htb default 30 tc class add dev br0 parent 1: classid 1:1 htb rate 4000kbit tc class add dev br0 parent 1:1 classid 1:10 htb rate 2000kbit ceil 4000kbit prio 0 tc class add dev br0 parent 1:1 classid 1:20 htb rate 1000kbit ceil 4000kbit

I cannot get HTB to function properly. Most classes transmit more than their ceiling, more than any reasonable burst would allow. I have reviewed my script several times but I can''t find anything out of place. The setup is as standard as it gets: one HTB root qdisc, a small tree of HTB classes, one SFQ qdisc for each leaf HTB class. To illustrate the problem, here is non-leaf HTB

Hello everyone, We are working on HTB with TC and would like some clarifications from your part. Our example is as follows. We have one HTB root class and two HTB classes attached to it, as in this figure : 1: HTB | | |

hello, i have a config that is with a large domain of rate, from 2kb to 40Mb and i have some problems with i don''t know how to deal with. so here are some classes 2 with q=1000, one with q 200000 and one with q=6400, all have been calculated by htb, in the code i speficien just rate,ceil, no quantum, no r2q, no bursts ($tc class add $IF_INT parent 1:2 classid 1:21 htb rate

I have 4 VLANs which i would like to give different priority on our internet connection. I would also like to shape traffic, according to its FWmark, in EACH VLAN. I have created this setup, with a HTB classes in a HTB class in a HTB class. (3 levels). ROOT IMQ1 QDISC 1:0 | HTB 1:1 (HTB AT LINE UPPER LIMIT) |

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi! I''m running htb on an 2.4.20 with the linux-2.4.20-ptrace.patch and now the messages in my syslog changed. specially, what is net-pf-14? I didn''t change anything else, just applied the patch and installed the kernel Mar 20 15:33:54 stovokor kernel: HTB: quantum of class 10001 is big. Consider r2q change.<4>HTB: quantum

hi. When I execute follow class setting qdisc 1:0 root htb default 2 parent 1:0 classid 1:1 htb rate 10Mbit ceil 10Mbit parent 1:1 classid 1:2 htb rate 10kbit ceil 100Mbit HTB: quantum of class 10001 is big. Consider r2q change. <7>htb*g j=1014xxxxx HTB: quantum of class 10001 is big. Consider r2q change. <7>htb*g j=1014xxxxx HTB: quantum of class 10001 is big. Consider r2q change.

Hi I''m actually using a wondershaper derived script. The problem I have is that when I ping (ping is in high priority queue) the ping time is not as low as I expected with p2p running: 760 packets transmitted, 760 received, 0% packet loss, time 759695ms rtt min/avg/max/mdev = 39.667/62.863/598.539/33.287 ms, pipe 2 With voip, it is much better with the qos but it is still a little