similar to: help, strange question about tcp and udp traffic control?

Hi ; MY script: tc-htb3 qdisc del dev eth2 root ipchains -F tc-htb3 qdisc add dev eth2 root handle 10: htb default 20 r2q 40 tc-htb3 class add dev eth2 parent 10: classid 10:1 htb rate 50Mbit burst 2000 tc-htb3 class add dev eth2 parent 10:1 classid 10:100 htb rate 12mbit ceil 50mbit prio 1 tc-htb3 class add dev eth2 parent 10:1 classid 10:20 htb rate 38mbit ceil 50Mbit prio 8 ipchains

Hi stef; imq patch of 2.2.17 form http://luxik.cdi.cz/~devik/qos/imq.htm diff against 2.2.17 Can you tell me how imq work with ipchains? thanks for your help regards, haipe _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hello! I need to switch from htb2 to htb3, because of speed issues (for me, htb2 is unable to handle more then 100mbit duplex with ~550 classes), kernel profiling shows htb_dequeue_prio at 1st place with 3x isolation. So, I''ve moved from 2.4.19 to 2.4.25 kernel (hi-pac for classification/marking and htb3 for queueing), and traffic rate drop from 100 to 20mbit. What can be wrong? The

hi all, i want to try htb3 with imq downloaded & patched imq & htb3 with kernel-2.4.18 on rh7.2 but got STUCK on step 1 :( this are what i did can anyone guide me what went wrong on the first step itself !! [root@cab1 root]# modprobe imq numdevs=1 modprobe: Can''t locate module imq [root@cab1 root]# [root@cab1 root]# tc qdisc add dev imq0 handle 1: root htb default 1 Cannot find

Greetings from a newbie! (Well, to this list anyway) I''m having a problem and I hope someone here might be able to help... I am strongly expecting an answer along the lines of "upgrade to v2.4.x", but I would REALLY preffer to avoid that for now... The setup: "Home brewed" v2.2.24 (will patch to v2.2.25 later today) with the DS8 patch applied. Currently

I have tried to replace these lines from ipchains to work with shorewall. # /NFS requires 111/tcp (sunrpc/portmapper) and *all* UDP ports./ # ipchains -A input -p tcp -s $SUBNET -i eth0 -d 0/0 111 -j ACCEPT ipchains -A input -p udp -s $SUBNET -i eth0 -d 0/0 -j ACCEPT # /These ports are required by bootp, tftpd, and PXE./ # /There are also a handful of udp ports that need to/ # /be open,

Hi ; HTB2 patch for kernel 2.2.17 HTB2 patch for iproute2 Here is my script : tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 10： htb default 20 tc class add dev eth0 parent 10: classid:10:1 htb rate 90mbit ceil 90mbit burst 2000 tc class add dev eth0 parent 10:1 classid 10:100 htb rate 10mbit ceil 30mbit prio 1 tc class add dev eth0

Can anyone tell me what the absolute minimally permissive ipchains rule would be to allow tinc to operate correctly between two hosts. If we were to presume each tinc host had a default-deny policy, what ipchains command(s) would allow tinc to do its thing? I've scanned the docs on the tinc site and not found the answer- sorry if I'm blind or dumb. Thanks, Patrick - Tinc:

Hi all , does Kernel 2.4 supports CBQ and HTB by default or we have to recompile it. Regards Fahad Khan _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hello, I''m using htb3 with kernel 2.6.13 on debian testing release. I have a hierarchy consisting of 10 parents clas each with 2 to 20 childs and every child use sfq. The problem is when the default class become congested, the system start to drop packets for 2 seconds all traffic is blocked, another 3 to 5 minutes all goes all and so on. Anyone have any ideea about this ?

Hi all! I try to make port based routing, because a have two connections to the internet. My router is a "one disk floppy router for linux". It is a big router project www.fli4l.de. I try also to make a opt, it is like a plugin for this router. This project uses Kernel 2.2.19 compiled with libc5 (because it is small and you can use one floppy disk). At the moment, iproute2 is not

I have a couple questions that I will submit separately. When I have IPchains running I can't get my samba box to show up in network neighborhood, but when I turn ipchains off the box shows up. What rules do I need to add for things to work properly? -- Raymond Norton Little Crow Telemedia Network 320-234-0270

Hello, I have been searching for HTB theory documentation and found two interesting sources - Devik''s page and docum.org FAQ. In some places they are contradictory which make me think that Devik''s theoretic document (marked "actual") is just too old and does not reflect the latest changes. After reading http://www.docum.org/docum.org/faq/cache/30.html and others, I

Hello, I''ve installed htb3 on my simple config (htb + sfq) . Something is now complaining that quantum is too small and suggest that r2q be changed. There seems to be no documentation on this. Ideas anyone? Regards John

Hi Tinc Mailing-Group, I am a bit stuck with firewalling rules at the moment. Maybe someone could please advise me a good rc.firewall script to use on my setup. If anyone runs an ipchains firewall script on their linux box which is ALSO running tinc, could they please mail it to me, for my perusal. I have tinc pre3 set up and working on my systems, however I can only get it to work if I set the

I figured this out -- looks like 2.5.1p1 is now using ports < 1024 on the client side (wasn't before?). I had a ipchains rule to allow ACK packets to 1024:65535, which was good enough for <= 2.3.0p1 : #allow only ACK tcp packed ipchains -A input -j ACCEPT -i eth0 -s any/0 --dport 1024:65535 -p tcp ! -y So I added the following : #allow return from ssh connections ipchains -A input -j

Just a quick word - I spent two days trying to get Samba to work. The whole problem was a lack of knowledge about ipchains (firewall). It was part of the RH7.1 install package, and the medium security setting stops all tcp and udp traffic for a lot of ports, including those needed for NetBIOS (137-139) It is pretty easy to fix, the IPCHAINS-HOWTO is a good and humorous read, and by the end of

I'm just about to give up in despair of getting Samba working on my network. I've browsed through several books, HOWTOs and websites and still can't figure out what I'm doing wrong. Before I quit, could someone double check this and maybe spot what I've missed? First, let me describe my network. Names and IP addresses have been changed to protect the innocent. :-)

Hi there, first of all I want to thank everybody who gave me good advise so far ;-). Now it's the first time I can give advise, and I'm quite glad that I can start giving insted of only taking now :-) ! Hi Petr, Yes, I have solved my general problems as follows: First of all you have to check your firewall settings, because that was the major problem on my system. On RH 7.2 the

I have found this problem while trying to see the active rules on IPTABLES: [root@worf root]# iptables --list /lib/modules/2.4.7-10/kernel/net/ipv4/netfilter/ip_tables.o: init_module: Device or resource busy Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.7-10/kernel/net/ipv4/netfilter/ip_tables.o: insmod