similar to: Re: Re: wondershaper kills eth0

Hi ! I'm using PXE to boot a Linux on a DLink DFE-530TX card. Everything worked well until I installed a Windows98 on it (please, foregive me...). Since the Windows drivers for that NIC were installed, I 'm unable to boot PXE, and I get the error: PXE-E61: Media test failure, check cable Any clue on how to make PXE work as before ? Cheers, -- Ludovic DROLEZ

Hi ! I wanted to shape my analog modem connection so I took these two lines from the ''wondershaper'' script: tc qdisc add dev $DEV handle ffff: ingress #tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip \ src 0.0.0.0/0 police rate ${DOWNLINK} burst 10k drop flowid :1 with DEV=ppp0 and DOWNLINK=24kbit. But, when I activate it, nothing comes back from the

SAMBA 3.0.23d (netbios name is PDC01, domain is LINBOXTEST) Windows 2000 server SP4 in mixed mode (netbios name is MAFIA-L6FFST3UP, domain is ADTEST / adtest.linbox.com) Hello, So I've successfully established a two ways interdomain trust relationship between a SAMBA PDC and a Windows domain. It was working fine: for example a windows user was able to connect on a share on the SAMBA server.

SAMBA 3.0.21c (domain is LINBOXTEXT) Windows 2000 SP4 (domain is ADTEST) Hello, I've established an interdomain trust relationship between SAMBA and Windows. Samba domain users can log into the Windows domain, but Windows domain users can't log to the SAMBA server. For example, if I try to log as "ADTEST/dupond" from Windows to SAMBA, SAMBA log says: [2006/11/15 20:17:05,

(Samba 3.0.21c / kernel 2.4.27 / Debian Sarge) Hello, One of my user open a file (located on a SAMBA server) in its application, and when he tries to save it, he gets a "share violation" error. (other people have this problem too). This error happens since I upgraded the SAMBA server from 3.0.14a to 3.0.21c. smbstatus for this file: 32613 DENY_WRITE 0x20089 RDONLY

Hello, SAMBA 3.0.10, MS Windows 2000 pro, HP deskjet 9300 printer driver available at: ftp://ftp.hp.com/pub/softlib/software3/COL4383/dj-14540-2/dj9308en.exe When I set the driver via APW, and then close the properties dialog, I get a protection fault from C:\winnt\explorer.exe. Attached is the corresponding samba log at level 3, and my smb.conf. The driver installation works fine if I set

Hello, (Samba 3.0.21c / Linux 2.4.27) a smbd process was hanging on a file server since one day. This smbd process was locking some files on the server, and that was causing some share violation for a Windows user (well, that what I think). I did a lsof on the smbd process, and I saw that the TCP netbios-ssn connection was still seen as established with the machine of the windows user that

Hello, I have two domains: - a domain FRANCE on a SAMBA PDC called "SARGE" - a domain DOMAINTEST on a Active Directory called "SRV2003-2" I followed the samba howto chapter on setting a domain trust relationship between this two domains. For now, I just want DOMAINTEST users to log on shares of the FRANCE domain. On Windows 2003 side, with the MMC I can check/revalidate

Hi, I'm using Postfix/LDAP with virtual domains and Dovecot 1.0rc15 as LDA with sieve plugin. The sieve plugin works fine except vacation. How can I increase the log level of deliver to see what's the matter ? Cheers, -- Matthieu VOGELWEITH Linbox - Free&Alter Soft 152, rue de Grigy 57070 Metz tel : +33 (0)3 87 50 87

Hi, hm at seneca.muc.de schrieb am 29.05.03 21:40:34: > I would like to load pxelinux as a second stage bootloader from a machine > which does not have a PXE BIOS (namely, from a VMware guest machine) in > order to perform an automated Linux installation. A boot floppy would > be nice. It seems that there are some commercial solutions around but > is there someting in the OSS

Hi, When i do ''wshaper start'' the interface i have defined stops routing traffic for some reason. It resumes routing when i do ''wshaper stop''. I''m using debian stable (3.0 woody) with debian''s default 2.4.18-686 kernel. When I run the script I get no errors, and when I do a ''status'', everything looks correct. Can ANYONE

Hello When a windows xp workstation join a domain, by windows gui parameters, ldap machine attributes are not filled correctly: - No attribute sambaprimarygroupsid (before, there was one terminated by 515) - rid (of sambasid) is not equal a 2*uid+1000 If i create a user, rid (sambasid) equal a 2*uid + 1000 (and sambaprimarygrousid terminated by 513) All the others samba attributes are ok Same

Hi ! I'd like to connect phpgroupware to asterisk: when a user click on a phone number, his phone rings and he gets connected to the number he just clicked. I've tried by putting various files in /var/spool/asterisk/outgoing, without results (we are using SIP phones + CAPI channels). Is there a way to do that ? (If it's impossible (something impossible in *, LOL ?!?) I will create

Hi ! We have Cisco 7912 phones, and the doc says that I can "create up to four speed dial buttons on my phone using the Cisco CallManager". Does anyone knows which protocol is used to configure speed dials (Is it documented somewhere) ? Did someone tried to reverse engineer the protocol ? It would be cool, not having to pay $15000 just for configuring speed dials on those phones ;-D

I tried installing the WonderShaper on my internal link, mostly to get the SFQ installed. I set uplink and downlink to 100000 to match the link speed and changed the bandwidth on the cbq line to 100mbit. This killed transfer speed *to* the box, knocking it from 30-40 Mbps down to about 800 kbps. Commenting out just the ingress control restored the speed. What about the ingress policer would do

Hello Thilo, What did you find superior with CBQ-wondershaper over HTB-wondershaper? We have not been using wondershaper specifically but our simple tests so far seem to show that htb is much easier to configure for a given target shape (i.,e accurate) compared to CBQ. Torsten -----Original Message----- From: Thilo Schulz [mailto:arny@ats.s.bawue.de] Sent: Saturday, June 14, 2003 8:55 AM To:

Hi everybody! I know this discussion list isn´t just about wondershaper, but i think someone can help me. I used to have a linux box running red hat 8, as firewall on my lan. I upgraded to debian 3.0 and tried to use the same wondershaper files under debian, but, when i run wondershaper on ppp0 device, it just stops transfering. Remember: its the same files i used with success under red hat 8.

Hi Guys, I''m asking this question again because I have exhausted resources for understanding how to get it to work. I''ve read the howto on getting traffic shaping to work (shorewall''s web site) as well as trying out wondershaper''s htb and cbq scripts. Somehow both does not seem to happen as I want it to. I''ve also read through the lartc

I have wondershaper to limit my upload at 400kilobits (my line is 600kbps). I do a lot of torrent seeding and I dont want my pings killed when I''m uploading so I set low prority source ports as follows (by the way, I have bittornet to only use ports 6881-6910): NOPRIOPORTSRC="6881 6882 6883 6884 6885 6886 6887 6888 6889 6890 6891 6892 6893 6894 6895 6896 6897 6898 6899 6900 6901

Hello, I am trying wondershaper-1.1a on a friend''s pppoe connection on her Linux box. There are a few things I don''t understand. 1. She has pppoe connection so should DEV=eth0 or DEV=ppp0 ? 2. Her ISP just says on her payment bill that the speed is 128kbps, but doesn''t mention any downlink/uplink speed, so in that case what should be, DOWNLINK= and UPLINK= ? 3. She