similar to: will any one do me a favor to answer the question about tc_index value ?

Hello all, This is a newbie question and it is very simple. In my local network of 10M bandwidth. I'd like to allow my PC to have a 9M bandwidth. While all the other PCs share the rest 1M bandwidth. Suppose my pc 192.168.3.2 gateway 192.168.3.1. Then, how could I set it in my gateway linux box? I think I should use tbf. Maybe, I need a cbq, but how to do it? The tc does not surport !

what's the meaning of this line in htb_activate() cl->prio_activity = 1 << (cl->un.leaf.aprio = cl->un.leaf.prio); who can help me? ,S f)鄸+-L)殜Y殱=jya囤f蟌瀇鎗)fj鍔薭濟?暘韕s朙鑝稛暘韗娻

Hello, I have the following proplem. My DiffServ configuration is working fine when I do ping, but when I use mgen the packets are not detected at the core router. Here is my core router configuration: #!/bin/bash tc qdisc add dev eth1 handle 1:0 root dsmark indices 64 set_tc_index tc filter add dev eth1 parent 1:0 protocol ip prio 1 tcindex mask 0xfc shift 2 tc qdisc add dev eth1 parent

Im experimenting with using a Linux machine with 3 interfaces to operate as a core router. All links and network interfaces are 100mbit. Below is a ascii diagram of the network. (network A) edge router ------>core router---->edge router (network C) ^ | | edge router (network B) I have tried two

I want to set the DSCP field of the incoming packets. And then put them in the correct queues. I can mark the packets: iptables -A OUTPUT -t mangle -d 10.10.10.12 -j MARK --set-mark 1 tc qdisc add dev eth0 handle 1:0 dsmark indices 64 set_tc_index tc class change dev eth0 classid 1:1 dsmark mask 0x3 value 0xb8 tc filter add dev eth0 parent 1:1 protocol ip prio 1 handle 1 fw

I ''ve been trynig for a long time now to make HTB and GRED to work togethen. The problem beeing that GRED doesn''t use handles (instead it uses DP:1 DP:2 etc) i can not preperly filter traffic to them. Tomas Graf suggested to use the tc_index index of u32 classifier so dear Sant .. i am currently with the following scripts that works! But when i try to add an HTB before the

hai all i need to implement CBWFQ in linux As i wrote script in edge as: which mark the EF traffic ____________________________________________________________________-__ #!/bin/sh DEV=eth0 tc qdisc add dev $DEV handle 1: root dsmark indices 8 tc class change dev $DEV classid 1:1 dsmark mask 0x3 value 0xb8 # making two filters tc filter add dev $DEV parent 1:0 prio 4 protocol ip u32 tc

Hi folks I have created a script file (dsmark+policing.sh attached) to check graphic an text outputs of simutations, against original examples/dsmark+policing coding (see TCNG Reference Manual-pg.90). It uses tcng coding (*.tcsim file attached) and old tc coding (*.tcsim_old file attached) inserted in tcsim files. Observation 1: The graphic outputs from (*.tc included in *.tcsim) and (*.tc_old

Hi, I am trying to get assured forwarding/expedited forwarding with gred and htb working. Below is the script I am using. The following steps are what I thing is how the script works. My problem is that if I remove the HTB qdisc from the script and have the GREDS parent as the dsmark it works, but when I add the htb as a parent of GRED and DSmark the parent of htb it does not work? Any

Hi i have configured my server with cbq and gred. The problem is that the cbq doesnt drop packets. The cbq is configured at a rate of 500Kbit "qdisc cbq 4: rate 500000bit (bounded,isolated) prio no-transmit Sent 100103048 bytes 73933 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 24000 undertime 0 " The traffic that being generated is more than 5Mbit with the

Hello all, Please could someone help me with this, I have been trying for days to get this to work. I would like to have BE, AF & EF classes with HTB qdisc. I can''t find any scripts online where this has been done. If I enable this filter: #tc filter add dev eth0 parent 2:0 protocol ip prio 1 \ #tcindex mask 0xf0 shift 4 pass_on then BE & AF classification seems to be fine but

Im using a Linux machine with standard pc hardware with 3 seperate PCI network interfaces to operate as a DiffServ core router using Linux traffic control. The machine is a P4 2.8ghz, 512mb RAM running fedora core 3 with the 2.6.12.3 kernel. All links and network interfaces are full duplex fast ethernet. IP forwarding is enabled in the kernel. All hosts on the network have their time sychronised

Hi, I want to setup core routers to do both DSCP marking and to get the DSCP and forward packets based on DS field. I don''t want to separate DSCP marking to be done only at the edge routers. I know that dsmark is both used for DSCP marking and for getting the DSCP and forwarding packets according to DSCPs. In my case, since I want to do both of these I need two dsmarks.(?) I am not

Hi: Execuse me if this has been mentioned before, I''ve looked around the archive but did not find anything about the problem I met. I''m trying to use tcindex to classify the the packet outgoing to one interface. I do as the following : tc q a dev eth0 root handle 10:0 cbq bandwidth 10Mbit avpkt 1500 tc c a dev eth0 parent 10:0 classid 10:1 cbq bandwidth 10Mbit rate

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Is there any grapical interface for the QoS (Quality of Service) Traffic Control in Linux ? Greetings. - --- Carles Xavier Munyoz Baldó carles@descom.es Descom Consulting Telf: +34 965861024 Fax: +34 965861024 http://www.descom.es/ - --- -----BEGIN PGP SIGNATURE----- Version: PGP 6.5.8

Hi. I did send this to `jaazz@post.cz'', but I suspect the list is a more appropriate/useful place for it. It''s a question about Michal Charvat''s QoS extension to Net-SNMP. When I look at the MIB entries for the QoS handles, I get something like this - enterprises.qos.qosObjectTable.qosObject.qosHandle.0.0 = Gauge32: 0

Hi,all I am using iproute2/tc to manage bandwidth and control traffic.I must realize these two tricky functions in mips linux(kernel 2.4.17): 1.The device MUST support the capability to fragment AF and BE traffic in order to constrain the perturbing impact of AF and BE packets on EF traffic delay, for example using a mechanism such as MLPPP LFI.(RFC1990) 2. The packet size threshold before

Hi I am encountering what I suspect to be a bug in the kernel processing of tc netlink messages: I am using kernel version 2.4.9 with iproute2-current-001007 package. Everything works fine in the kernel. Now I open a netlink socket with a user process, read the tc netlink messages generated by the tc process and parse them. What I see is that the kernel has already processed the messages

Newbie here... tcng version 10b I''m just learning about htb and using tcng. I am trying to make the example in Martin A. Brown''s Traffic Control with tcng and HTB HOWTO v0.5 example 2 /* * Simply commented example of a tcng traffic control file. * * Martin A. Brown <mabrown@securepipe.com> * * Example: Using class selection path. * * (If you are reading the

Hi stef and all I want measure the policy perfomance for video traffic on mpls diffserv network. there are two different polices for video packet 1. Video packets that are marked that are over the limit are to be rejected at the edge router. 2. Video packets that are marked that are over the limit are to be downgraded as best effort and are sent through. Before video enter my mpls