similar to: OSPF problems

Hi Nitin, First of all, you can verify that ntpd is responding on ingress with netcat : nc -u ingress 123 (udp connection on port 123) also try a netstat -an on ingress to be sure that the port 123 is in listen state... I recently install ntpdate, and it has worked as a client and a local ntp server immediatly. Good Luck, Yannick / Annecy in France -----Message d''origine----- De :

Hello, Please tell me if it's possible to use tinc together with OSPF (instead of static routes in LAN). By OSPF I mean Quagga's GNU/Linux daemon. Namely, I have a group of LANs (private 192.168.x.0/24 each). Each LAN has a GNU/Linux default gateway, 192.168.x.1, that also connects to the Internet via a public IP address (does NAT and firewall for the LAN "behind" it). tinc

Hi, The network topo looks like this: the original network: router1 router2 | | |----------------OSPF------------| the target network: (we need to insert a transparent firewall between these 2 routers, so a proxy arp is set up on firewall to bridge router1 and router2) router1 firewall router2 |

What shorewall rules would be required to allow the OSPF routing protocol to pass fw<->loc? Any suggestions would be appreciated. Ben

Hi Everyone, I have a routing situation where Tinc looks like it could come in extremely useful, but I have a query I hope someone can cast an eye on, as I'm unsure whether Tinc can help me here. I currently have a Quagga OSPF linux router which connects LAN A to LAN B over the quickest available of two routes (both routes at both ends connect to Quagga boxes to prevent collisions). One of

Hi List, FYI. We have been using CentOS 6.4 and have 2 vpn/gre tunnels to separate cisco rtrs using ospf. with kernel 2.6.32-358.23.2 We have upgraded to 6.5 bit using kernel 2.6.32-431.5.1 and the exact same configuration scripts for our vpn/gre tunnels. What I see is the first gre tunnel works great and I get an ospf neighbor. The second tunnel comes up and I can ping across it and I see

Hi, all! Can I enable multicasting via shorewall? I have router with Gentoo Linux (one interface to ISP, one with alises - to local network). Shorewall work perfect! But now I need setup Quagga (zebra) for dynamic routing between one more router via another provider. All routers daemons (zebra, ripd, ospf) used multicasting. In my configuration already enabled allowBcast and etc.

After installing Zebra for ripd to get win2k routes I am getting this May 20 23:24:20 ns1 kernel: Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=64.42.53.202 DST=64.42.53.207 LEN=92 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=520 DPT=520 LEN=72 May 20 23:25:25 ns1 last message repeated 3 times I am new to zebra, so I am assuming that this is broadcasting to windoz for routes weird !!!

Before I start, I don''t want to do ECMP or simple bonding ... I have multiple Internet connections available to multiple boxes on one of my networks. Box A connects to ISPs 1, 2 and 3 Box B connects to ISPs 1 and 4 Boxes A and B are both connected to each other and the rest of the network. 1) I would like to set up some dynamic routing in such a way that any given outgoing packet from

Hi folks, At work, we're considering the idea to replace the presente router with a stardard box with CentOS as a SO and GNU Zebra as a routing software. The line is a 4Mbps SDSL. ?What do you think about Zebra and what are your experiencies with it? Any feedback will be so appreciated. TIA.

Hello Anyone used Zebra routing daemon and created virtual routers before? Is it possible to run OSPF/BGP on each virtual server and get them to talk to each other? I''m new to Xen and I need to know... I will be trying this out in the coming days and I want to know about any pitfalls to avoid. -- Nonchalantly yours GobbledeGeek [Every thing but Gobbledegook.. !!]

I''m getting an error when shorewall is trying to add the default routes for my multi-isp configuration. I''ve attached a shorewall dump... If anyone can give some input I''d appreciate it. RTNETLINK answers: Invalid argument ERROR: Command "ip -4 route replace default scope global table 254 nexthop via 67.110.119.245 dev eth3 weight 1 nexthop via 66.29.181.113

First of all, My apologies for this maybe slight OT post, but I have so much confidence and read so much good replies on this list, that I am still asking my question. I''m looking for a linux distribution to use on our school''s homemade routers. The routers are small miniITX based systems with 2 network interfaces. I added a 4 port D-Link network card in some cases, when I

I''ve got a linux router pushing 600-1000 pppoe connections through it. I''m getting a screen error "Neighbor Table Overflow" after this box has been up for between 1 week and 1 month. When this is happening, routing slows to a crawl if at all. Then dies. I''ve added: # Added to stop "neighbor table overflow" messages in the kernel

There has been numerous threads etc regarding this but all that has left me is more than a little confused :-(. I have setup and environment consisting of two OpenVPN tunnels and wish to load balance at the packet level between them. I am currently running on Linux edm 2.4.21-20.EL.c0custom #2 Tue Oct 12 08:52:23 BST 2004 i686 i686 i386 GNU/Linux And have install Quagga at each end to provide

Hi Guys, I would just like to have advice and pointers of the best way would be, Someting like BGP or OSPF? I have 2 internet connections at diffrent locations. let say connection A and B 1.) router A has a fast internet connection and a seperate interface for clients using /lan/pppoe/ipsec etc and another ethernet interface going to router B 2.) router B has similiar setup as router A and

Hi all, I am currently trying to emulate a satellite link, via Netem, on a testbed which is OSPF-enabled. I''d like to set up a Netem box between two routers. Since all routing between routers is dynamic, I''m wondering how to set up OSPF on my Netem box? Could someone indicate me if it is feasible and give me some guidelines to possibly do so? Thanks in advance, Vincent.

Hi, With kernel 2.4 I was able to use equalize to send our outgoing packets to two different routers (our isp supports this setup), like this: ip route add default src ip.a.dd.rr equalize nexthop via <router1> weight 1 nexthop via <router2> weight 1 The two routes were used equally on a per packet basis, not per flow or per cached route, but per packet, each line has 800k upload

List members; I have been reading the digest for some time now and I would like to ask some conceptual questions. I am a telecommunications systems designer and not a software guy, but I have tried and used a number of the tools availabel in the LARTC and Iptables, and many of the other great things included in Linux. We are designing commercial products and I don''t want to ask my

I have, for the time being, decided to split my dual ISP/single shorewall connection into two shorewall connections/boxes, each handling one ISP. I am running OSPF in the network and so far things are working out fairly well (from a client of the two gateways). $ ip route ls 10.33.66.2 via 10.75.22.199 dev eth0 proto zebra metric 20 192.168.200.1 via 10.75.22.254 dev eth0 proto zebra metric