similar to: CentOS5:Printer Won't Work

I have a HP OfficeJet K80xi all-in-one USB printer. The hplip web site tells me to do "rpm -qa hplip" from a virtual console. The result is "hplip-1.6.7-4.1.e15" (driver model installed). The web site table shows any driver later than 0.9.5 should work. When I send a file to the printer from a virtual console (lp filename), the response is "request ID is HPOJK80-7 (1

What is this all about? Seems to be related to my attempt to load hplip-3.10.9 to support an HP Photosmart 3210 all-in-one for scanning through saned. from /var/log/messages: Jan 31 20:07:26 desk python: [2851]: error: dbus failed to load (python-dbus ver. 0.80+ required). Exiting... Jan 31 20:07:49 desk python: hp-systray[3402]: warning: Qt/PyQt 4 initialization failed. When I check for

I have already reported this as a bug to the HP folks, but I was hoping someone here might have a clue about this one. Just bought an HP Deskjet F2120 and tried to install it on my CentOS 5.064-bit system. The printer installed fine, but sane does not recognize the device, so I tried to install hplip 2.7.10, which is supposed to support it. Installation failed twice - first time because I did

Is anyone successfully using hplip under CentOS? When I try to print on my HP Officejet J4580 I always get the error ---------------------------------- Printer Filter "foomatic-rip-hplip" for printer "oj" not available: No such file or directory ---------------------------------- What I find puzzling is that I have googled for this, and it appears there has been the same

Since doing "yum update" this morning, an update that installed several packages, the updater shows me 3 packages to install: hpijs-1:3.12.4-4.el6_4.1 (x86_64) hplip-common-3.12.4-4.el6_4.1 (x86_64) hplip-libs-3.12.4-4.el6_4.1 (x86_64) but when I attempt to actually run the update I get: hplip-libs-3.12.4-4.el6.i686 requires libsane.so.1 hplip-libs-3.12.4-4.el6.i686 requires

[mlapier at peach ~]$ rpm -qa | grep hplip hplip-common-3.14.6-3.el6.x86_64 hplip-libs-3.14.6-3.el6.x86_64 [mlapier at peach ~]$ rpm -qa | grep cups cups-1.4.2-74.el6.x86_64 cups-pk-helper-0.0.4-13.el6.x86_64 gutenprint-cups-5.2.5-2.el6.x86_64 cups-libs-1.4.2-74.el6.x86_64 cups-libs-1.4.2-74.el6.i686 [mlapier at peach ~]$ CentOS release 6.8 (Final) I've been able to print to this printer

Le 11/11/2016 ? 09:02, anax a ?crit : > Hi Niki > don't you need a hplip addon/plugin, which you can fetch from > http://hplipopensource.com/hplip-web/install/install/index.html > > There, with the wizard, you get a file hplip-3.x.x.run > which you download and run using > bash hplip-3.x.x.run > > This will install the addon/plugin. Thanks, I got it to work

On 27/09/16 10:45, Kay Schenk wrote: > > > On 09/25/2016 06:09 PM, Mark LaPierre wrote: >> >> [mlapier at peach ~]$ rpm -qa | grep hplip >> hplip-common-3.14.6-3.el6.x86_64 >> hplip-libs-3.14.6-3.el6.x86_64 >> [mlapier at peach ~]$ rpm -qa | grep cups >> cups-1.4.2-74.el6.x86_64 >> cups-pk-helper-0.0.4-13.el6.x86_64 >>

Hi Folks, the reason: new printer HP LaserJet Pro M1132 MFP This printer needs a non-free plugin. On my 64-bit machine with CentOS 5.5 the installation via hplip-3.11.1.run and hplip-3.11.1.plugin.run works perfectly (except scanning - but that's not the problem at the moment). On my second machine - CentOS 5 32-bit I have many problems and printing doesn't works. 1. Installation

There has been a bit of grumbling recently about HP printer capability in one of our smallest prototyping Labs.? We have a single GigE switch connecting a Windows 7 machine and a Dell/CentOS-6 machine.? The CentOS machine also has connectivity via another network.? Currently, only the Windows 7 machine has been setup for printing on our HP OfficeJet 8615. Our Samba effort on the CentOS system has

I have an HP Photosmart 3210 All-in-One color printer. Printing works great, but I cannot get xsane to locate it on the local subnet. I've been to the sane site and looked at the backends. The HP 3210 is supported by hpio and there is a note that hpio is no longer needed because the functionality has been rolled int hplip. yum shows hplip is installed: hplip.x86_64 1.6.7-4.1.el5.4

Hi, I just installed a CentOS 7 + KDE desktop in my office's network. So far, I'm quite happy with the results, though I have some trouble getting the printer to work. All the other machines in my office (server, desktops, workstation) are running Slackware64 14.1 or 14.2, and they can all use the printer perfectly. I installed hplip-gui and ran it. The printer is a network printer, it

Hi list, I've a printer model HP ENVY 5530 (AIO) configured in wifi. I've configured this printer on my C7(1511) workstation using hplip and cups. Printer is installed e configured. After installation I try to send a test print page and it is printed. After reboot, I try to print other doc, and I got it printed only on grey-scale and if I try to send another test print page from hplip

First, has anyone successfully installed the HPLIP driver from HP in CentOS4? Second, does that driver really provide the toolbox which includes handy stuff like ink level monitoring? I got the source RPM (hplip-0.9.4-1.1.src.rpm) from an FC4 testing mirror, which rebuilt fine on this machine: . . . + umask 022 + cd /home/rj/rpmbuild/BUILD + cd

Hi, I just installed CentOS 7 + KDE on a new workstation in my office. I tried to setup my printer, but the test page is blank. Here's some details. The printer is an HP OfficeJet 8600 Pro. It works perfectly with all other desktop clients running Slackware Linux and HPLIP. I installed hplip and hplip-gui, launched HP Toolbox and then setup the printer - a network printer - which is mainly

on Centos 5.2 2.6.18-92.1.22.el5.centos.plus Has anyone gotten HPLIP 3.9.2 to work? If so what was done about python-dbus and PyQt4-dbus? They don't seem to included after installing PyQt4-4.4, sip 4.4.5, and hplip 3.9.2. thanks, roger wells -- Roger Wells, P.E. SAIC 221 Third St Newport, RI 02840 401-847-4210 (voice) 401-849-1585 (fax) roger.k.wells at saic.com

My wife purchased an HP Deskjet F340 all-in-one printer last year. CentOS 5 includes hplip-1.6.7. I need at least hplip-2.7.10 which I have had to install via tarball. Is there any plans to update this package soon? Thanks -- Bob Taylor

On Fri, Aug 21, 2015 at 12:44:38PM -0600, Frank Cox wrote: > On Fri, 21 Aug 2015 11:51:27 -0500 (CDT) > Gilbert Sebenste wrote: > > > On Fri, 21 Aug 2015, Eero Volotinen wrote: > > > > Hello Eero, > > > > > Well, is it really supported on Linux? I can't find driver for it on: > > > http://www.openprinting.org/printers > > I can find

I'm trying to get hplip-2.7.12 installed, and I'm reasonably sure that I had it installed on this box before my problems last month. Anyway, it will not build at the moment. It stops the Configure with "configure: error: "cannot find libjpeg support". However, Package libjpeg - 6b-37.i386 is already installed. Similarly, attempting to install hplip-3.9.2 stops with

Hi Folks , The problems with HPlip goes on and on : I can not manage to establish a connection on WiFi with the HP4620 : I can print to the printer but not scan . Running hp-check results in cups is not running, hplip is not properly (HP) installed , xsane is not installed etc.. But I can assure you all this software is properly installed : Hp-check cannot detect the scanfunction on