similar to: HTB and TC on MAC addresses

Hi, I am trying to do both ingress and egress bandwidth management on a bridge. eth0 is the WAN interface. IPTraf shows that the following script is running successfully and it limits bandwidth both ways to 256 KB However when I want to see the statistics using tc - it only shows me stats for htb class and not for ingress class. The tc output is as follows: tc -s -d class show dev eth0 class

Hi guys, I''m new to TC HTB traffic shaping.... I installed it at my first try on my Bearing Leaf Router/Firewall I use the tc -s class show dev eth? To see my output All looks dandy and nice, but it''s figures, of which at current momment looks like French to me, I would like to see exactly what these figures looks like in a GRAPH style... I know I can use MRTG, I do have

I posted earlier when I noticed that htb was releasing packets in pairs, even though my burst/quantums were 1 pkt. To fix I set HTB_HYSTERESIS 0 in net/sched/sch_htb.c . This gives a noticable gain in upstream worst case latency, for me with 256kbit/s up I used to see +90 sometimes, now it''s +45. For the many who have 128 up it should limit them to +90 rather than +180. Andy.

Hi, I have a problem with ''tc filter'' on a 2.4.22 kernel from Slackware 9.1 distribution. The tc command binary is from htb3.6-020525.tgz (http://luxik.cdi.cz/~devik/qos/htb) I''m trying the following command sequence: tc qdisc add dev eth0 root handle 1: htb default 1 r2q 1 tc class add dev eth0 parent 1: classid 1:1 htb rate 1200kbit ceil 1200kbit tc class add dev

Hi, I want work out a GUI interface for htb and now here comes to the part about adding and removing classes and filters. Here is an example script. TC="tc" DEV="dev eth1" echo "Add root qdisc, default traffic go to 1:30" $TC qdisc add $DEV root handle 1: htb default 30 echo "Divide the traffic into different classes and levels" # -------- level 1

Hi, we r using HTB algorithm,for traffic shaping, we are facing a problem. we are able to create multiple classes,filters. But when we delete 1 filter all filter gets deleted. how do we avoid that. waiting for you reply Regards Jayesh ------------------------------------------------- Shop & Save at Sifymall.com! Special Festive Offers - up to 60% off on DVD players, MP3 Players. Mobile

Hello, Does anyone know when one should use cbq versus (simpler more accurate) htb? Specifically does cbq have added functionality that may be of interest to certain applications? from htb home> Both CBQ and HTB help you to control the use of the outbound bandwidth on a given link. Both allow you to use one physical link to simulate several slower links and to send different kinds of

Hello everybody, I try to work with TC for a little while in my study and there still are a few questions that I can\''t find any answer anywhere. Firts about qdisc and classes: - What is exactly the difference between qdsic and class ? They are so \"intimately tied together\" that i\''m not sure not make the difference. Why can\''t we have a qdsic HTB with

I''m trying to implement something similar the the diagram in section 9.5.2.1 in the LARTC HOWTO, but must have missed something somewhere :( I''m trying to hack up wondershaper, as it looked like a good place to start.. Here''s where I currently at, but I''ve tried alot of different things, all failing, some worse than others. The end result is to throttle back 126

Hi, can any body suggest any tool which can show the utilisation for individual classes for HTB. preferable written in C/or shell script. Regards Jayesh ------------------------------------------------- Still single? Click here to find the perfect match. http://www.bharatmatrimony.com/cgi-bin/bmclicks1.cgi?141

HTB and imq was used to control traffic. AC="tc class add dev eth0 parent" $AC 1: classid 1:1 htb rate 100kbps burst 2k $AC 1:2 classid 1:10 htb rate 50kbps ceil 100kbps burst 2k prio 1 $AC 1:2 classid 1:11 htb rate 50kbps ceil 100kbps burst 2k prio 1 please tell me the range of "prio" _________________________________________________________ Do You Yahoo!? 新鲜到底,娱乐到家 -

Hello there, Having made quite a lot of expensive mistakes i have finally clobbered together a script for the users on my network. Have a look at it and please suggest as to how can i limit bandwidth to each ip on this network to about 64Kbits. Trevor -- ( >- GNU/LINUX, It''s all about CHOICE -< ) /~\ __ trevor@clovertechnologies.com __ /~\ | \) / Pre Sales

Dear All, Sorry to trouble again..... After go through www.lartc.org I have implemented the HTB instead of CBQ for the same scenario. Now following files are under /etc/sysconfig/htb directory. eth0 DEFAULT=30 R2Q=10 eth0-2.root RATE=256kbps BURST=25k eth0-2:10.comp1 RATE=120kbps BURST=12k PRIO=0 LEAF=sfq RULE=192.168.200.0/24 eth0-2:20.comp2

Hi everybody! I''ve been trying with htb and tc filter. It seemed to work fine, but after testing with ethloop I''ve realized that traffic is not being distributed through the leaves as I thought. When sending packets to 1:10 and 1:11 at the same time, there''s no bandwidth sharing. There''s no traffic through 1:11 until traffic through 1:10 has finished. Though

I have an htb qdisc setup and it is shaping my traffic wonderfully but I''ve just recently started taking a look at the output from the command tc -s class ls dev eth? Looking at the "rate" line I thought to myself..."cool I can use this to graph throughput avg.es without having to worry about the "Sent bytes" rolling over or being lost when the htb qdisc is

Is there a flow diagram as to where tc actions take place with respect to NAT and other iptables functions on a multihomed box (private & public NICs) ? Are tc filter rules consulted before or after NATing? My real interest is in basic understanding first, and then solving a real problem second. Example: Firewall Public NIC 123.123.123.1 Firewall Private NIC 192.168.168.1 Dedicated Video

Hi all, We have 2 class C networks that are connected by a Linux router with the internet. We want to apply traffic control (bandwidth control). For that we wrote the tcc script below. We have 2 problems: 1. To establish a 2 megagit download we must actually set the value to 2500kbps. Is there a possible reason for that? 2. If we enable the WAN device we get very hight ping times (they change

Hi, I have some interesting problem with htb , I set up root class and sub-classess: $TC qdisc add dev eth0 root handle 1: htb $TC class add dev eth0 parent 1: classid 1:1 htb rate 1990kbit ceil 2000kbit $TC class add dev eth0 parent 1:1 classid 1:10 htb rate 190kbit ceil 200kbit $TC class add dev eth0 parent 1:1 classid 1:11 htb rate 1400kbit ceil 1600kbit $TC class add dev eth0 parent 1:1

I downloaded iproute2-2.4.7-now-ss010824.tar.gz and I did patched tc with the htb3.6_tc.diff from htb3.6-020525.tgz and when I try to use a htb script I get just errors. I did not patch the kernel, since I use kernel 2.4.21 and I saw on - HTB Homepage that I need to patch it only if I run version 2.4.20 or earlier. Do also need the kernel patch ? Or maybe is something else wrong? RTNETLINK

Hi, All, Does anyone have working scripts using HTB for QoS but IPtables for filtering? I want to learn how to put them together. Do the scripts working on Redhat? Thanks in advance, James