similar to: CBQ DEVICE BW?

Sub:[LARTC] cbq init for one port on a subnet Hello, We use cbq.init to limit bandwidth. It works great on a per-user basis. Now I''d like to limit traffic from a netblock to the Internet on port 6699. Network is 192.168.0.160 mask 255.255.255.224 eth0 is the gateway eth1 connects the netblock in question Is this the proper syntax; DEVICE=eth0,10Mbit,1Mbit RATE=100Kbit

Hi all, I want to allocate bandwidth for ipsec interface using CBQ/tc. Suppose the conf. file is like this, DEVICE=ipsec0,10Mbit,1Mbit RATE=128Kbit WEIGHT=10Kbit PRIO=5 RULE=192.128.1.0/24 Does it work or What else options need to be taken care like ipsec packets/protocol/port # etc.? C''d anybody suggest please? regds, Srikanth. _______________________________________________ LARTC

About the cbq.init. Four machines which traffic to limit in same LAN. Is the samething if I put limiting rules to four different files or all to the same file? Like: DEVICE=eth0,10Mbit,1Mbit RATE=64Kbit WEIGHT=6Kbit PRIO=5 RULE=192.168.0.5 RULE=192.168.0.6 RULE=192.168.0.7 RULE=192.168.0.8 OR four equal files with different IPs, Ids and no PARENT rule? What style of ID numbering you use if

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Guys Ive got an internet cafe on which I have a debian sarge box running. The Debian box acts as a gateway and it has masquerading on. I have 40 client PC and i do not want to assign more than 64k per pc for upload and the same is true for download too. Ive done alot of research and Ive read tutorials about CBQ and HTB. I found that CBQ.init is

Hi, I need to find out all the places where the value of a variable is being used. For this I have to implement reaching definitions(def-use chains). When I searched for its implementation I found Iterating over def-use & use-def chains <http://llvm.org/docs/ProgrammersManual.html#iterate_chains>. will this work for finding the places where a variable is reaching? I tried to use

Hi Duncan Sands, I frankly don't know what a variable gets converted to (SSA register or memory chunk). What I meant is, for example I1: int i, j=10; I2: scanf("%d", &j); I3: i = j + 1; Here I want to know whether the value of j in I1 reaches I3 or not. Best Regards, Srikanth Vaindam you didn't define what you mean by a variable. LLVM has virtual registers which are

Dear Samba Team, First of all Thank you for Implementing samba4 version with RSAT it was very useful in our environment.we have configured samba4 with RSAT in our college it was working for the past 5 to 6 weeks and then later we are facing the problem in accessing sharing folder i am getting error "security id structure is invalid" is there any solution for this

Hello Gurus, Greetings. I have been assigned some work on the development of a migration tool. The requirement is that it has to migrate the data on a UFS/VxFs filesystem to an ext2 filesystem. What are the technical apects I will have to look into to achieve the same? Is it possible to change the on-disk structure of the UFS/VxFs filesystem to an ext2 filesystem? The question may

Rowland Penny <rowlandpenny <at> googlemail.com> writes: > > On 13/01/15 11:48, srikanth <at> icat.ac.in wrote: > > Dear Samba Team, > > First of all Thank you for Implementing samba4 version > > with RSAT it was very useful in our environment.we have > > configured samba4 with RSAT in our college it was working > > for the

Hi, Any body having idea to find the NIC Capacity / BW (10 / 100 Mbps) ? Whether the interface may be eth0/eth1/ppp0 or some other. Is there any related IOCTL avialable, if so just give the linux-2.4.18 file path. thanks, Srikanth. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi, I am trying to build llvm 3.4.2 on Centos 6.6. I am getting this below build error , while building the libcxx. I followed the build procedure based of http://clang.llvm.org/get_started.html. I cannot move to a higher version, Since we need to develop on CentOS 6.6 and LLVM 3.4.2 ,is the last version that supports gcc 3.4.2. Starting from LLVM 3.5.0, there has been a huge jump to gcc 4.7.0.

Hi, I am an engineering student in IIT Guwahati, India. Currently, as a summer project I am working on 'packet loss concealment in voip scenario'. I am eager to know what PLC methods are used at receiver end of speex decoder. And if I could develop some more efficient method I could able to contribute to the speex. Actually, I searched the whole speex manual but failed to find what

Hi, I want to see bandwidth every ip address in the local network that passing my linux gateway in the console, may be it''s similar like mrtg (web based version) It''s possible ? Best regards, >--<Kristiadi Himawan>--<

Original Message: ----------------- From: Stef Coene stef.coene@docum.org On Saturday 19 April 2003 12:10, GoMi wrote: >> Stef, if you are interested in working around this problem, maybe we >could >> meet in a chat room, and you can login to my box and see what happens, >> interested? >Yes, but not now. But I can check it out myself. >How do this DAP works? Do they

Which diference of I to use the CBQ and the HTB? I need priority a many ports.. same ports are 5060(voip),25(mail) and 3128(squid) It''s a my example off cbq arquive : DEVICE=eth0,10Mbit,1Mbit RATE=500Kbit WEIGHT=50Kbit PRIO=5 RULE=:5060 BOUNDED=yes ISOLATED=yes I need specific a rate or is not!? Igor _______________________________________________ LARTC mailing list

Hello Iam using RH 7.1 and want to control the down stream bandwidth the set up is --------------------------- eth2 | Linux | eth0 Internet -----------------------| box | ---------------------------- LAN 172.16.1.185 |

Hi, i have a question if linux is able to do the same thing that commercial wan simulators do (which cost 7000 $ or more). Basicly i want to use the following setup. Linux Router Machine 192.168.0.1 192.168.1.1 Eth0 192.168.10.1 Eth5 192.168.2.1 Eth1 192.168.100.1 WEB Server. 192.168.3.1 Eth2

If I create a cbq qdisc as a leaf of a cbq class, the bandwith rate is the same of the root cbq qdisc or the rate of the cbq class? Does exist the parameter rate on the "tc qdisc add" for cbq command? tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 10mbit avpkt 1000 cell 8 tc class add dev eth0 parent 1:0 classid 1:3 cbq bandwidth 10mbit rate 50kbit allot 1514 cell 8

Hello, Does anyone know when one should use cbq versus (simpler more accurate) htb? Specifically does cbq have added functionality that may be of interest to certain applications? from htb home> Both CBQ and HTB help you to control the use of the outbound bandwidth on a given link. Both allow you to use one physical link to simulate several slower links and to send different kinds of

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, what''s the diferences between HTB and CBQ? Bye - -- ======================================== Netsite S/A - Security Officer Profissional Certificado Conectiva Linux www.kidmumu.com.br - UIN 4553082 ======================================== -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see