similar to: cbq vs htb?

Hi, The CBQ config file shud be some thing like this. DEVICE=eth0,10Mbit,1Mbit RATE=50Kbit WEIGHT=5Kbit Shall i hardcode the DEVICE BW as 10/100 Mbit or Shall i use any other tool like ethtool for getting this. ethtool gives Speed: 10Mbps If so, how about, if i use some other Interfaces other than eth0, like ppp0 or some other? C''d anybody can give a suggestion over this? thanks

Hi all , does Kernel 2.4 supports CBQ and HTB by default or we have to recompile it. Regards Fahad Khan _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

If I create a cbq qdisc as a leaf of a cbq class, the bandwith rate is the same of the root cbq qdisc or the rate of the cbq class? Does exist the parameter rate on the "tc qdisc add" for cbq command? tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 10mbit avpkt 1000 cell 8 tc class add dev eth0 parent 1:0 classid 1:3 cbq bandwidth 10mbit rate 50kbit allot 1514 cell 8

Hello there, Having made quite a lot of expensive mistakes i have finally clobbered together a script for the users on my network. Have a look at it and please suggest as to how can i limit bandwidth to each ip on this network to about 64Kbits. Trevor -- ( >- GNU/LINUX, It''s all about CHOICE -< ) /~\ __ trevor@clovertechnologies.com __ /~\ | \) / Pre Sales

Hi Stef, Reffering to page < http://www.docum.org/stef.coene/qos/faq/cache/7.html > I found a para as follows, " CBQ is not always as accurate as it should be. See docum.org on the test page for some tests with bounded classes. The algorithm used by cbq is very "link sensitive". It calculates the link idle time and for that it needs the real link bandwidth, average

Hi - I''ve been going through the LARTC how-to and have successfully used the sample scripts (and wondershaper) with my xDSL links. I''m now faced with the challenge of providing 8 users at work an effective remote access connection over a PSTN ppp connection. The critical traffic in this case relates to our stock enquiry application which is running over terminal services.

How to do ensure a class not lended and not borrowed each other. I do cburst burst 0b ,but ctokens tokens go to negative! --------------------------------- Do You Yahoo!? "更多惊喜，同样精彩，NetVista A30 热卖" --0-611462377-1048485942=:33792 Content-Type: text/html; charset=gb2312 Content-Transfer-Encoding: 8bit <P>How to do ensure a class not lended and not borrowed each

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, what''s the diferences between HTB and CBQ? Bye - -- ======================================== Netsite S/A - Security Officer Profissional Certificado Conectiva Linux www.kidmumu.com.br - UIN 4553082 ======================================== -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see

Hello everybody, I try to work with TC for a little while in my study and there still are a few questions that I can\''t find any answer anywhere. Firts about qdisc and classes: - What is exactly the difference between qdsic and class ? They are so \"intimately tied together\" that i\''m not sure not make the difference. Why can\''t we have a qdsic HTB with

Hello ppl, I''m playing with the pfifo scheduler, its simple, and i cannot understand what''s wrong. So, i have test machine, with one interface eth0, and i want to send no more than 3 packets/sec out of that interface, so i do: tc qdisc add dev eth0 root pfifo limit 3 And i get pfifo scheduler on eth0 with limit of 3, but it sends as many packets per second as it wants, without

Hi I''m completely stuck with the tcng language - I assume there must be some way to arrange queues hierachically like eth1 | TBF | PRIO / \ class class but my attempt (below) produces a "inferno.tc:8: qdisc "tbf" has no classes near "prio"" when run through tcc. dev eth1 { egress { tbf (rate 128kbps, burst 64kb,

About the cbq.init. Four machines which traffic to limit in same LAN. Is the samething if I put limiting rules to four different files or all to the same file? Like: DEVICE=eth0,10Mbit,1Mbit RATE=64Kbit WEIGHT=6Kbit PRIO=5 RULE=192.168.0.5 RULE=192.168.0.6 RULE=192.168.0.7 RULE=192.168.0.8 OR four equal files with different IPs, Ids and no PARENT rule? What style of ID numbering you use if

The manual says (about prio): > Because it doesn''t actually shape, the same warning as for SFQ holds: > either use it only if your physical link is really full or wrap it > inside a classful qdisc that does shape. The latter holds for almost all > cable modems and DSL devices. I want to wrap prio inside of tbf. Here''s why: I have a server on a DSL line, which has

tc qdisc add dev eth0 root sfq perturb 10 I want to set perturb to 8 then i used this tc qdisc add dev eth0 root sfq perturb 8 system give me the following message RTNETLINK file exists I delete the rule by this :"tc qdisc del dev eth0 root sfq perturb 10" please tell me how can i delete the rule by another way and where is "RTNETLINK file"

Hi all, I want to allocate bandwidth for ipsec interface using CBQ/tc. Suppose the conf. file is like this, DEVICE=ipsec0,10Mbit,1Mbit RATE=128Kbit WEIGHT=10Kbit PRIO=5 RULE=192.128.1.0/24 Does it work or What else options need to be taken care like ipsec packets/protocol/port # etc.? C''d anybody suggest please? regds, Srikanth. _______________________________________________ LARTC

Hello, After reading the excellent HOWTO I got traffic shaping working nicely over ethernet devices on a test setup. I can''t put this setup live though, because our main firewall has three 2mbit hdlc interfaces instead of a single device. We are using multipath routing using iproute2 nexthop at the moment, and that works fine for firewalling. But now I have a need for shaping and

Hi Stef and Alexey I have read some documents about CBQ algorithm from http://www.icir.org/floyd/cbq.html but still have some question about CBQ in Linux . 1. First estimator can estimate how much bandwidth already USED per class. one estimating algorithm is EWMA (exponential weighted moving average), how about Linux implemenatation about estimator? also do you have link for this algorithm? I

Hi All, I''m using iptables-1.2.7a on RedHat8 kernel 2.4.20. I wanted to limit the file-sharing traffic to the internet. I marked the packets with iptables: iptables -A FORWARD -t mangle -p tcp -s 192.168.1.1/24 -d ! 192.168.1.1/24 --dport 1024:1862 -j MARK --set-mark 1 iptables -A FORWARD -t mangle -p tcp -s 192.168.1.1/24 -d ! 192.168.1.1/24 --dport 1864:65535 -j MARK --set-mark 1

how can I configure for shaping bandwith using cbq/htb without delay or latency?

Hi I''ve searched the archive for a solution where I want to limit/shape WLAN users. I only know''s their MAC, because they get their IP from dhcp. > Why not, just use negative offsets with U32 to access >the 14-byte eth frame header before the IP header: > >Decimal Ofs Description >----------------------------------- >-14: DST MAC, 6 bytes >-8: SRC MAC, 6