similar to: Hashing filters

Hey all, I had asked a question a little while ago about CPU usage being outrageous while using tc and a cbq qdisc. Ed was very kind and offered a few suggestions. One of these was to look at hashing. So after pounding away at it for about a week, I have a general understanding of how it works and have tried to implement it. Unfortunately, and quite obviously since I''m posting here, it

Hi all, I am a newbie and I have not played a lot with tc utility. I have red maybe everything that has to do with massive filtering (maybe not everything). If you can help me on this I would appriciate that very much. I use tc utility with iproute2-ss040831. I want to limit bandwidth for the 192.168.0.0/16 subnet using this script. tc qdisc del dev eth0 root tc qdisc add dev eth0 root

I''m trying to shape each machine on an interface to 256k each, but I''m getting stuck and only able to shape an entire interface to 256k. What should I be doing differently here? tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 100MBit ceil 100MBit tc qdisc add dev eth0 parent 1:10 handle 110:

Hi I''m doing traffic shaping with tc on ''10.0.0.0/30'' and ''10.0.0.28/30''. I want to delete part of shaping rules on the fly. (see my configuration at the end of this mail) I wan''t to delete the shaping for ''10.0.0.0/30'' on the fly while still keeping the shaping for part ''10.0.0.28/30'' running. When I for

Hello I have 2 class-B networks (172.22.0.0/16 and 172.23.0.0/16, over 130k of ip''s) and need to setup traffic tbf shapers with 64kb/s for each ip from 172.22.0.0/16 and 128kb/s for each ip from 172.23.0.0/16 just read lartc and don''t understand how to use u32 for decreasing number of rules and hashing

Hi, I am trying to put together a hashing filter based on example provided in LARTC how-to document. I want to link two hashing filters together where first one will use 3rd octet of an IP address as hashkey and second one will use 4th octet as hash key. How do I tell mask the address so that u32 filter uses 3rd octet as hashkey? Venkatesh K _______________________________________________

Hey, I have such a script: tc qdisc add dev $DEV root handle 1:0 htb default 21 r2q 2 tc class add dev $DEV parent 1:0 classid 1:11 htb rate 100mbit tc class add dev $DEV parent 1:11 classid 1:21 htb rate 512kbit ceil 512kbit tc class add dev $DEV parent 1:11 classid 1:23 htb rate 1024kbit ceil 1024kbit tc class add dev $DEV parent 1:11 classid 1:25 htb rate 3072kbit

I have: tc qdisc add dev imq0 root handle 1: htb default 30 tc class add dev imq0 parent 1: classid 1:1 htb rate 512kbit ceil 512kbit tc class add dev imq0 parent 1:1 classid 1:30 htb rate 64kbit ceil 512kbit then: iptables -t mangle -A PREROUTING -i ppp0 -s 192.168.2.2 -j IMQ --todev 0 tc class add dev imq0 parent 1:1 classid 1:22 htb rate 64kbit ceil 128kbit tc filter add dev imq0 protocol

Dear list: I have a problem I cannot handle yet, and need to solve it as soon as possible. Would be very greatful with anybody who can help me. I have a 512/512 link to internet, that I want to share between several computers. I have eth0, with a public IP address, conected to Internet, and also, eth1, with a private IP address, for network with the surfing computers. I have a main class with

Hi I have been playing with tc. I''m using htb and sfq. I tried to setup shaping of every ip address within a /20. I found that there must be an upper limit of about 2096 on the number of rules (classes, qdiscs or filters). I was testing a /20 which gives 4096 classes, qdiscs and filters. I''m using hashkey to optimize processing of frames. When executing the script below - it

Hi i have 2 class C 80.97.103.0/24 and 81.180.12.0/24 but i dont konw how to set hashing tables for HTB tc add dev eth0 parent 1: prio 0 handle 1: protocol ip u32 divisor 256 tc add dev eth0 parent 1: prio 0 protocol ip u32 match src 80.97.103.0/24 hashkey mask 0x000000FF at 12 link 1: but i want 2 hashkey for 80.97.103.0/24 and for 81.180.12.0/24 can somebody help me ?

Hello! I have a quite complicated setup. In my network on each interface there is bandwidth limitation for each user. Booth outgoing (on interface itself) and incoming (attached IMQ) traffic. There is main HTB class which limits bandwidth for whole interface and HTB subclasses for each user. Filtering is done with hashing filters. This setup was working correctly. But now in the network I

how to see which packets is going in to default class? -- Denis Kot denis?jabber.org.by ICQ: 13680126 Mobil: +375 29 6-1234-78 _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Dear list, I have the problem that child classes don''t seem to issue the parent class to borrow from their parent. This is a simplified version of my script: tc qdisc del dev $DEV root tc qdisc add dev $DEV root handle 1: htb default 10 tc class add dev $DEV parent 1: classid 1:1 htb rate 10mbit tc class add dev $DEV parent 1:1 classid 1:10 htb rate 1kbit ceil 512kbit #groups tc

Hello. I have a linux server connected to a gigabit lan, and though that lan to a 768kbps/768kbps DSL modem. I''m trying to shape my webserver running on port 80/443 down to 512kbps, while leaving all other ports alone. The current configuration script that I''m using is as follows: tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 99 tc class add dev

Hello all, I have set my QoS solution and now I am facing a little problem... When I ping to my server it has some lost packages: Estatísticas do Ping para 172.30.0.1: Pacotes: SENDED = 1029, RETURNED = 880, LOST = 149 (14% de perda), Aproximar um número redondo de vezes em milissegundos: Mínimo = 0ms, Máximo = 686ms, Média = 105ms If I disable my QoS ping stats to be ok. I even have

Hi, I have some interesting problem with htb , I set up root class and sub-classess: $TC qdisc add dev eth0 root handle 1: htb $TC class add dev eth0 parent 1: classid 1:1 htb rate 1990kbit ceil 2000kbit $TC class add dev eth0 parent 1:1 classid 1:10 htb rate 190kbit ceil 200kbit $TC class add dev eth0 parent 1:1 classid 1:11 htb rate 1400kbit ceil 1600kbit $TC class add dev eth0 parent 1:1

Hello! I''ve put some questions on this list some weeks ago and I''ve got good answers. Thank you! Now I''ve finished my (beautyful) script and I ran it on my router... About my script: It routes packages based on their destination on the Internet. I have about 1650 preffered destination networks listed in some file. The script read this file and marks every package for

Hi, complete newb and I apologise for it. I have a setup where my linux box has multiple broadband connection where I am routing certain things over certain interfaces, currently 2 links eth2 is a 1500/256 and eth3 is a 512/512, eth0 is the link to the LAN for users. What I am trying to do is traffic shape the information going out eth0 to the local users by the interface the traffic arrived

Hello, my linux show me that: server2 root # ip route add default scope global nexthop via 192.168.5.1 dev eth2 weight 1 nexthop via 192.168.160.1 dev eth0 weight 1 RTNETLINK answers: Invalid argument What can I do???? Thanks Matias --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.726 / Virus Database: 481 - Release Date: