similar to: masquerading with dhcp

hi! I'm trying to get zapras working in GSM csd network. Whenever a dialup call is initiated from the mobile to the * gateway the following appears in the log and zapras terminates. Phone gives the error dialup not answered. ==> /var/log/messages <== pppd[2310]: Plugin zaptel.so loaded. pppd[2310]: Zaptel Plugin Initialized pppd[2310]: Using zaptel device 'stdin' pppd[2310]:

AHOI! I've big trouble by setting up CentOS 6.3 for my new vDSL. As I've found out, the German Telekom is using VLAN7 for her internet-(data) connections. => http://workaround.org/blog/vdsl O.K. what I've done: The NIC where's my DSL-modem is connectet is eth0. cat /etc/sysconfig/network-scripts/ifcfg-eth0 # device for vDSL-modem DEVICE=eth0 HWADDR=00:30:1B:14:08:67

I sent the message below to this list over a week ago, and I haven''t seen any response. If this is not the correct forum for my question, can anyone suggest a better person or place to which I should direct it? Thank you, Jonathan Kamens ------- Start of forwarded message ------- From: Jonathan Kamens <jik@kamens.brookline.ma.us> To: lartc@mailman.ds9a.nl Subject: [LARTC] MSS

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I'm sure most people are aware of the ability of pppd to answer calls coming in from a standard serial modem (or at least that is the way I understand it to work), authenticate the user and issue it an IP address. With the proper ip forwarding/masquerading techniques, this can serve as a fully functional ISP of sorts. It also offers a nice method

Hi folks, Don't know if it could be interesting or not, even useful, but past days i was spending my time trying to use an old gsm motorola v150 mobile phone to get access to my host from my palm device with pssh (http://www.sealiesoftware.com/pssh/), these are the steps i did to accomplish it, feel free to suggest or improve it, anyway i found it usefull. First, this motorolla has an usb

Hello, i have ported the BCP (Bride Control Protocol) patch for pppd 2.4.1 mentioned in http://lists.osdl.org/pipermail/bridge/2004-September/000619.html to pppd 2.4.2. The kernel patch still works without problems with kernel 2.4.30. Perhaps someone else could use this patch ... Here again some documentation i have found about the BCP patch somewere else: When pppd negotiates BCP, it tells

I try to setup a PPTP VPN server on Centos 7 and from client a router Vodafone Station (Firmware 5.4.8.1.316.1.21) On c7 I have install this: [root at s-virt tmp]# rpm -q pptpd ppppptpd-1.4.0-2.el7.x86_64ppp-2.4.5- 33.el7.x86_64 and setup all file and firewall like howto say.This now is my config: /etc/pptpd.conf:option /etc/ppp/options.pptpd/etc/pptpd.conf:logwtmp/etc/pptpd.conf:localip

I am trying to set up a secure PPP tunnel between an OpenSSH client and server, and am having problems establishing the tunnel. ----------------------------------------------------------------------------- Server information: Stock Redhat 6.1 machine running a 2.2.12 kernel OpenSSH version 2.2.0p1 (downloaded as Redhat RPMs, revision 2) OpenSSL version 0.9.5a (downloaded as Redhat RPMs, revision

Hi @ll it works (now a small description, please note this was only test setup to bring me nearer to the desired function !!!) i just compiled the new pppd 2.4.3 in my suse 9.2 system. ( i build a suse rpm ) i ve configured a test smb pdc ------------------------------------------------ [global] encrypt passwords = yes unix charset = ISO8859-1 display charset = ISO8859-1

Hello all! Sirrix AG, Saarbr?cken (manufacturer of the Sirrix.PCI4S0 4-port ISDN card for Asterisk) has released the new Asterisk dialplan command PPPD (app_pppd). It allows to connect a Linux PPP daemon to an arbitrary digital (ISDN) Asterisk channel to provide RAS dialin and dialout. The PPPD command has successfully been tested with Sirrix.PCI4S0 cards and a standard ISDN4Linux ipppd "on

I'm trying to set up a Linux-based dialin server on our company network. I'd like to have PPP authenticate using winbindd, if possible. I feel like I've almost gotten it to work, but I can't quite get there. Files: /etc/pam.d/ppp: #%PAM-1.0 auth required pam_nologin.so auth sufficient /lib/security/pam_winbind.so account required

On 05/11/15 18:40, Steve Ankeny wrote: > On 11/05/2015 12:14 PM, Reindl Harald wrote: >> >> >> Am 05.11.2015 um 18:08 schrieb Steve Ankeny: >>> 'network-manager' is not installed but 'resolvconf' is -- >>> >>> adam at eagle:~$ cat /etc/resolv.conf >>> # Dynamic resolv.conf(5) file for glibc resolver(3) generated by

Hi, I'm trying to get zapras do work, I had downloaded the pppd-source and the 2 patches. I succefull compiled and install the patched version of pppd, but got this error in message-log Jul 15 11:43:32 voip1 pppd[9296]: In file /etc/ppp/filters: unrecognized option 'active-filter' Jul 15 11:43:57 voip1 pppd[9299]: Plugin zaptel.so loaded. Jul 15 11:43:57 voip1 pppd[9299]: Zaptel

Blame guus. -- Rob 'robster' Bradford Chief Editor/Lead developer DebianPlanet.org -------------- next part -------------- Sep 1 10:24:02 zeus syslogd 1.4.1#2: restart. Sep 1 10:24:17 zeus pppd[326]: rcvd [LCP EchoRep id=0x92 magic=0x9936a81f] Sep 1 10:24:47 zeus pppd[326]: sent [LCP EchoReq id=0x93 magic=0x48b43815] Sep 1 10:24:47 zeus pppd[326]: rcvd [LCP EchoRep id=0x93

On 11/05/2015 12:14 PM, Reindl Harald wrote: > > > Am 05.11.2015 um 18:08 schrieb Steve Ankeny: >> 'network-manager' is not installed but 'resolvconf' is -- >> >> adam at eagle:~$ cat /etc/resolv.conf >> # Dynamic resolv.conf(5) file for glibc resolver(3) generated by >> resolvconf(8) >> # DO NOT EDIT THIS FILE BY HAND -- YOUR

Hello all, I am working on a VPN solution using FC3-2.6.12-1.1381 - openswan 2.4.4-1 - l2tpd 0.69-13 - pppd 2.4.3-5 - samba 3.0.10-1. When attempting a connection from an XP-SP2 box pppd dies without authenticating the user (see below). I have run ntlm_auth from the command line with success. What tools can I use to identify the failure? Is there an obvious error in the ppp options file?

thanks to the samba crew- we have converted several netware and nt user servers into one seam-less Unix network, except for one group, netware dialup users. ok, win95 client, ppp to linux server. using newest pppd, with correct ms-wins and ms-dns code. client can dial, gets wins server ips, etc. the client functions fine with tcp-ip stuff. the ppp server is the wins server. go to client and do a

Hi I'm trying to connect a USB CDMA modem (z010) to a CentOS 4.1 (kernel 2.6.9-11.EL) and I can't talk to the modem. I tried the same modem under Fedora Core 1 (2.4.22-1.2199.nptl) and it works like a charm. The only difference is /dev/ttyACM0 for CentOS and /dev/input/ttyACM0 for the Fedora. Any help would be appreciated. Tank's. Fernando Lan?a Some debug info: CentOS:

-----BEGIN PGP SIGNED MESSAGE----- ============================================================================= FreeBSD-SA-02:32.pppd Security Advisory The FreeBSD Project Topic: exploitable race condition in pppd Category: core Module: pppd Announced: 2002-07-31 Credits:

#!/bin/sh PPP=(ppp0 ppp1) IP=(`ifconfig ${PPP[0]}|sed -n 2p|column -s ":" -t|awk ''{print $3}''` `ifconfig ${PPP[1]}|sed -n 2p|column -s ":" -t|awk ''{print $3}''`) GATEWAY=(`ifconfig ${PPP[0]}|sed -n 2p|column -s ":" -t|awk ''{print $5}''` `ifconfig ${PPP[1]}|sed -n 2p|column -s ":" -t|awk ''{print