similar to: Tired of temp induced shutdowns

My company supplies me with a very nice HP nc2400. Much faster, more memory, etc than my old HP nc4010. Problem is the drive is not swappable, and they encrypt the drive (the OS is XP). The nc2400 has a DVD/CDRW and 2 USB 2.0 ports so I was thinking..... Make a Live DVD with everything I need but map /etc /root /home and /var/log (and what else?) to a USB flash drive (16Gb are available

I am trying to get JPilot working. I have configed gnome-pilot-applet, but it is not talking to the USB connected Treo650. My Treo has my name as the user, so from the applet, I see also a userid (my UID on this system it seems). I try to put that on the Treo and nothing happens. I have enabled the Backup Conduit. I am using /dev/pilot, which shows up when my Treo is connected via its USB

I just installed Centos 5 for my notebook (HP compaq nc4010) on a separate drive (than this one that has Centos 4.5). When I first booted after all the setup, X did not start. hmm. Rebooted, and X came up fine. I did a bunch of customizing and upgraded the kernel Rebooted, X did not start. Rebooted X started fine. I checked some things out then tried the Suspend feature. Not

Changes at my day job (we have a big merger being finalized), has me in the market for a new laptop. They may require me to only run the approved XP build on the system they provide. I do not know if they will fund another unit for me or not, so I am looking to go cheap. Here is what I am looking for: Runs Centos (duh!) Supports Suspend to memory as well as to disk. Bootable from

Hello I am running Asterisk on SUSE Linux Professional 9.3 on a VIA Epia M Series motherboard - CPU runs at 1GHz. There is no fan - just a large heatsink. Currently system is running off standard IDE hard drive - because I couldn't get astlinux to run with my Digium TDM04B card (only PCI card in system). Strangely I also have the same system also running SUSE Linux running as a file

This is a new Centos 5.1 install on a HP nc2400 (that use to run XP). Completely clean install; blew away the XP partitions... After applying all the updates, and configuring for the rpmforge repo, I used yumex to install dkms and the dkms-ipw3945, ipw3945-firmware, and ipw3945d rpms. lsmod|grep ipw shows: ipw3945 180391 1 ieeee80211 33417 1 ipw3945 and dmesg)grep

The CentOS drive for the HP NC4010 is built. I just needed to use external instead of USB power for my USB CDrom. Go figure... I did this in my hotel room, where they only have wireless. I went down to the 'business center' and used an ethernet drop, but I don't think the registration worked. I didn't know that even for the ehternet drops you have to do that portal thing

Well FWbuilder is NOT easy. The documentation does not match the current GUI. Now the box is locked up. I will have to pull it again, hook it up to a kybd/VGA and reset iptables.... Maybe Shoreline with webmin.... Problem is I want a REAL router/firewall with little work. Both public and private nets have routable addresses. No NATing for me! I just help write the RFC ;) And all the

So right now I have installed k3b on this notebook. I am using my Storix DVD/CDRW usb drive. I can read cds with it. Cannot burn CDs. First k3b suggests slowing down (from 8x to 4x). Then use TAO. Then it gave up. So I try cdrecord directly. -checkdrive finds some interesting things. Got to close the drive manually; cdrecord says it can't. then try a cdrecord -v dev=dev/scd0 sample.iso

On 6/28/2015 11:50 PM, Sorin Srbu wrote: > That DIY Kit was pretty cool, thanks for the info! I note everyone is moving over to the Intel Avoton/Rangley 'system on a chip', this is the Xeon Atom C2xx8 series, like this... http://store.netgate.com/ADI/RCC-VE-2440-board.aspx (other versions of Rangley come with 2-4-6 ethernet ports, and 2-4-8 cores) these are higher performance than

My first notebook upgrade: I repaired my old HP nc4010 (bought a new hinge on ebay) and realized this was the perfect way to test out the upgrade to 5.2 before doing it on my production notebook. First I updated to 'current' 5.1 (by current I mean I have not synced my 5.1 local repo since building my 5.2 repo). I had not used my nc4010 for a while and the kernel was at

I've got a remote system where I think I need to replace the CPU fan. in the output of dmidecode, I get... Processor Information Socket Designation: CPU 1 Type: Central Processor Family: <OUT OF SPEC> Manufacturer: Intel ID: 47 0F 00 00 FF FB EB BF Version: Intel(R) Pentium(R) D CPU 2.66GHz

On 7/8/08, Marko A. Jennings <markobiz at bluegargoyle.com> wrote: > On Tue, July 8, 2008 10:03 pm, Stephen John Smoogen wrote: >> On Tue, Jul 8, 2008 at 7:56 PM, Lanny Marcus <lmmailinglists at gmail.com> >> wrote: >>> On 7/8/08, Lanny Marcus <lmmailinglists at gmail.com> wrote: >>>> On Tue, Jul 8, 2008 at 8:00 PM, Ross Cavanagh

I just replaced my fan in my nc2400. It was a 5hour job. Had to pull EVERYTHING to get to where they have the fan in the thing. Now I want to know if it is working. It is suppose to be thermostatically controlled, and it takes time to heat up. So how can I find out what Centos knows about the system temp and fan state? It was hard to tell if I put the connector in the right way. At least

Everytime I see this in the logs my internet access stops for about 5 minutes. Nothing else follows in the logs. I have DSL. Any ideas? Aug 15 17:14:56 bonsai gconfd (root-6095): starting (version 2.14.0), pid 6095 user 'root' Aug 15 17:14:56 bonsai gconfd (root-6095): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position

On 08/13/2017 05:18 AM, ken wrote: > Also, cowboys scoff, but I always wear a grounded wrist strap when > handling electronics. It's a good idea, especially in low-humidity climates. Also noteworthy: the air moving through a hose can cause a vacuum's hose or attachment to build up a static charge, which is another reason it can be a bad idea to use a vacuum in a computer.

Just had a weird thing happen that I've never encountered before. Running Centos 5.x (updated) on 32-bit (Athlon XP). Was going along in Firefox when suddenly my screen went black and the hard drive light came on mostly steady for several seconds. After a little bit I got back the X login screen. It normally comes up on F7, but F7 was dead (with some text I'll paste in below in case it

more messages in the other node of the cluster.../var/log/messages. ======== Jun 1 19:05:59 linux2 kernel: cdrom: open failed. Jun 1 19:05:59 linux2 kernel: cdrom: open failed. Jun 1 19:09:35 linux2 kernel: OCFS2 Node Manager 0.99.10-BETA14 Tue May 31 23:34:42 EDT 2005 (build 82257c19fee200eff2ba31569613b46a) Jun 1 19:09:35 linux2 kernel: OCFS2 DLM 0.99.10-BETA14 Tue May 31 23:34:43 EDT 2005

more messages in the other node of the cluster.../var/log/messages. ======== Jun 1 19:05:59 linux2 kernel: cdrom: open failed. Jun 1 19:05:59 linux2 kernel: cdrom: open failed. Jun 1 19:09:35 linux2 kernel: OCFS2 Node Manager 0.99.10-BETA14 Tue May 31 23:34:42 EDT 2005 (build 82257c19fee200eff2ba31569613b46a) Jun 1 19:09:35 linux2 kernel: OCFS2 DLM 0.99.10-BETA14 Tue May 31 23:34:43 EDT 2005

Hello I'd like to build myself an Asterisk server for SOHO use. Intel's D201GLY2 motherboard (http://tinyurl.com/ddarzp) looks like a very good deal, but I'm concerned about two things: 1. Will an A400P (from OpenVox, but supposed to be Digium-compatible http://tinyurl.com/ck6nfu) fit with a PCI riser, or will the CPU heatsink/fan be in the way? I downloaded the PDF from