similar to: HTB statistics

Hi, One more of those ... 1) what is a ctoken with regard to HTB? Does the ''c'' stand for ceil and if so how is it different from tokens? 2) Is the difference, only in the generation of these tokens? 3) Would the ctokens and token be treated equally once borrowed? Kindly help. Thank you. Regards, suraj. __________________________________ Do you Yahoo!? Protect your

Hello. The problems are: 1. Using HTB I get negative values for tokens and ctokens in tc -s output, for example: mich:~# tc -s -d class show dev eth0 class htb 1:11 parent 1:1 prio 1 quantum 1024 rate 8Kbit ceil 23Kbit burst 1609b/8 mpu 0b cburst 1628b/8 mpu 0b level 0 Sent 0 bytes 0 pkts (dropped 0, overlimits 0) lended: 0 borrowed: 0 giants: 0 tokens: 1287999 ctokens: 453286 class htb 1:1

We run a Hosting farm behind a bridge/iptables firewall setup running Gentoo with kernel 2.4.20-gentoo-r6, connected to a dual 15Mbps international internet pipe / , as this: Net Pipe --------- eth1 Bridge/Firewall eth0 -------- Internal Hosting Network lately we have been looking at htb to somehow control excessive usage from the users behind, but in our implementation there seems to be an

here is the situation i am using htb.init with fwmark to do QoS. i have 2 parent classes with RATE=CEIL which then have some leafs each on his own. the first one works fine (it shapes the packets to the specified rate) class htb 1:21 root rate 1Mbit ceil 1Mbit burst 2909b cburst 2909b Sent 631520262 bytes 651550 pkts (dropped 0, overlimits 0) rate 131573bps 141pps lended: 380595 borrowed: 0

Hi, I am trying to do both ingress and egress bandwidth management on a bridge. eth0 is the WAN interface. IPTraf shows that the following script is running successfully and it limits bandwidth both ways to 256 KB However when I want to see the statistics using tc - it only shows me stats for htb class and not for ingress class. The tc output is as follows: tc -s -d class show dev eth0 class

Hi I have setup iproute2 and need a bit of help reading the stats from it ===== output qdisc htb 1: r2q 10 default 20 direct_packets_stat 0 ver 3.17 Sent 547326809 bytes 1342627 pkts (dropped 9303, overlimits 2817572 requeues 0) backlog 46p qdisc sfq 10: limit 128p quantum 1514b flows 128/1024 perturb 10sec Sent 41874343 bytes 730889 pkts (dropped 0, overlimits 0 requeues 0) qdisc sfq

This is a long message. Please use a monospace font :) I''m trying to shape the traffic between my LAN and the Internet. My link is an ADSL 512/128 line. The network is shaped like this: LAN GATEWAY ROUTER ------------------ ------------- ------------ | 192.168.0.1/16 | <----> | 192.168.0.1 | <----> | 10.0.0.138

Hello, 1. I currently have a 128kbps cable link to the internet..and I''m sharing this connection with others. I''ve made the following script(for alocating bandwidth depending on the services used: browsing, squid, games like counter-strike, icmp, ssh), which unfortunately isn''t working very well as the response times I''m getting upon pinging the server

Hey all. I''m trying to set up QoS using the HTB qdisc in a very basic setup, but it the example shown in the howto doesn''t seem to be working. While the packets show up in the correct classes, they appear to be completely ignoring the rates, meaning nothing gets shaped. My setup is that I''ve got a a bunch of machines behind my firewall/router: 1.2.3.1

Hi, I''m fighting seriously with a most simple HTB setup. I''d like to share the incoming 64kbps into 5 and 59 for two different machines under NAT. HTB seems to hold the required limits when ceil is not set (no borrowing), but when borrowing enabled it seems to share equally rather then keeping the specified ratio. My setup is below. A typical output of "tc -s -d qdisc

I used Stef Coene''s snmp.pl. #./tc.sh #./get_snmp.pl #./snmp.pl #tc -s class ls dev eth0 class htb 20:1 root rate 80Mbit ceil 80Mbit burst 106440b cburst 106440b Sent 674762 bytes 5660 pkts (dropped 0, overlimits 0) rate 3bps lended: 0 borrowed: 0 giants: 0 tokens: 8313 ctokens: 8313 class htb 20:10 parent 20:1 rate 40Mbit ceil 80Mbit burst 54017b cburst 106440b Sent 670753

Hi. I did send this to `jaazz@post.cz'', but I suspect the list is a more appropriate/useful place for it. It''s a question about Michal Charvat''s QoS extension to Net-SNMP. When I look at the MIB entries for the QoS handles, I get something like this - enterprises.qos.qosObjectTable.qosObject.qosHandle.0.0 = Gauge32: 0

How to do ensure a class not lended and not borrowed each other. I do cburst burst 0b ,but ctokens tokens go to negative! --------------------------------- Do You Yahoo!? "更多惊喜，同样精彩，NetVista A30 热卖" --0-611462377-1048485942=:33792 Content-Type: text/html; charset=gb2312 Content-Transfer-Encoding: 8bit <P>How to do ensure a class not lended and not borrowed each

Hi, i have created a parent class with 45Meg rate/ceiling Note : The actual traffic flowing via that pc is around 6Meg to 15Meg I assume the problem will come only when the traffic is more than 45Meg. Now if i create child classes whose sum of rates crosses more than 45Meg ? 1.How that tc behaves. 2.Will this affect browsing. Pls let me know this details Regards Jayesh

hi,Stef: I read your burst test,I have some questions remain. A and B have immovability bandwith: If I bound bandwith to machine A and B,in order to it have 4Mbps,the other machine B have 6Mbps,(I have 10Mbps total). between them no permit bend from each other. whether burst cburst tokens ctokens value is zero. it''s right? --------------------------------- Do You Yahoo!?

Hi! I''m trying to limit the uplink bandwidth using htb but no packets are overlimit or dropped. :-( My router config: * Linux kernel 2.4.20-pre10 (htb v3.7) with everything built as modules in QoS, iptables in use. * tc binary from htb3.6-020525.tgz * external interface eth0: Internet access, 512 kbit/s uplink speed * internal interface eth1: internal LAN, 100 Mbit/s The hosts in the

Hi, machine: AMD K6 200 MHz Linux distribution: Mandrake 8.1 kernel: compiled 2.4.21 applied this: #define PSCHED_CLOCK_SOURCE PSCHED_CPU in file linux/include/net/pkt_sched.h bevore compiled the kernel (described on http://www.docum.org/stef.coene/qos/faq/cache/40.html) bandwitch on eth0: 128kbit The most simple configuration - 122kbit guaranted for WWW (sport 80) and

Hi, can any body suggest any tool which can show the utilisation for individual classes for HTB. preferable written in C/or shell script. Regards Jayesh ------------------------------------------------- Still single? Click here to find the perfect match. http://www.bharatmatrimony.com/cgi-bin/bmclicks1.cgi?141

I posted earlier when I noticed that htb was releasing packets in pairs, even though my burst/quantums were 1 pkt. To fix I set HTB_HYSTERESIS 0 in net/sched/sch_htb.c . This gives a noticable gain in upstream worst case latency, for me with 256kbit/s up I used to see +90 sometimes, now it''s +45. For the many who have 128 up it should limit them to +90 rather than +180. Andy.

Hi, we r using HTB algorithm,for traffic shaping, we are facing a problem. we are able to create multiple classes,filters. But when we delete 1 filter all filter gets deleted. how do we avoid that. waiting for you reply Regards Jayesh ------------------------------------------------- Shop & Save at Sifymall.com! Special Festive Offers - up to 60% off on DVD players, MP3 Players. Mobile