similar to: HTB Question

Hi guys I have a config as follows for one of my networks. I want to give the xxx.xxx.xxx.xxx/xx network 64kbit for everything from the internet but 8000kbit from our internal servers on yyy.yyy.yyy.yyy/yy network. It does not work. I only want to use u32 filters. I think what's happening is the first flowid of 1:21 is catching them and not getting to the 1:40 flowid. Is this right? The box

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

Dear all, I want to make a filter for all IRC-Dalnet traffic, so I want to put all traffic for port 6660, 6661, 6662, 6663, 6664, 6665, 6666, 6667, 6668, 6669, 7000, 7001, 7002, and 8000 to a class. So, I create a TC script as below. I''m sure, it is not effective, and we can write it in simpler. I need help, how to make my script below are simpler. The simpler, the better. Thank you

hello, I have working htb system with about 1000 users. Until now I reload all rules at change, but it take too much time to apply. I cannot delete applyed filters. There is rules for one user: #!/bin/bash -v # Download shaper EX -> 2:20 /sbin/tc class add dev eth2 parent 2:20 classid 2:1775 htb rate 8000Kbit ceil 10000Kbit quantum 1514 /sbin/tc qdisc add dev eth2 parent 2:1775 sfq perturb

Hello everyone, First of all, sorry for my poor english. I''ve been working with this for a few weeks and I''m getting sick... I''m trying to control the bandwith in my network using the following script. The machine where the script is running makes NAT, eth0 is connected to the router and eth1 is connected to the Lan. When I run the script it doesn''t appear any

I have htb on 486 sx with 16mb ram. Slackware 9.1. Connection : dsl 1Mbit. 486 works as router and trafic shaper for network made of 12 pc''s. it does the job quite well, but when i play Counter-Strike or connect to my 486 via ssh (on lan), i get huge lag every 11-20 sec. when i connect to 486 via ssh and run iptraf program i see all the trafic, and after a while when lag comes the

Here goes the filter statements: #Initializing traffic control... tc qdisc add dev br0 root handle 1:0 htb #Loading queue disciplines for plis230 network... tc class add dev br0 parent 1:0 classid 1:1 htb rate 512kbit ceil 512kbit #Loading queue disciplines for pmad048 network... tc class add dev br0 parent 1:1 classid 1:20 htb rate 30kbit ceil 30kbit #server queue tc class add dev br0 parent

Hi, complete newb and I apologise for it. I have a setup where my linux box has multiple broadband connection where I am routing certain things over certain interfaces, currently 2 links eth2 is a 1500/256 and eth3 is a 512/512, eth0 is the link to the LAN for users. What I am trying to do is traffic shape the information going out eth0 to the local users by the interface the traffic arrived

Actually i gave up, i tried and tried and tried so many times, upgrading software falling back to an old version but it didn''t work, that''s it. i can''t do work together tc with iptables and iproute2 when i mark a packet with iptables tc doesn''t recognize them so it falls at the default leaf of the tc''s tree what i like is to mark packets depending on

Hello. I''m running linux box with Slackware 9.1 and compiled kernel 2.4.31 with "yes" to VLANs and "yes" to all QoS. On this box i have more ethernet interfaces: eth0 eth1 eth2 and so as more vlan interfaces: eth0.100 eth1.3 eth1.4 This is entrace(uplink) router to our whole network and my goal is to shape users on this machine. I want for this purpose use HTB so

Hi all. I have a bridge running Linux 2.4.24 that I use as a bandwidth manager on a broadband wireless network. I''m using HTB and SFQ to prioritize that share bandwidth on a per-cell basis. My IP tables rules divide the traffic based on IPand traffic type (using layer-7 filter and ipp2p). My goal is to make sure that p2p traffic on the network doesn''t sink all of the

----- Original Message ----- From: Michał Joachimiak To: lartc@mailman.ds9a.nl Sent: Tuesday, July 20, 2004 3:45 PM Subject: HTB - Really Big problem Hello everybody! Since week i dig lists and www and can''t find solution for my problem. I''m using HTB 3.13 kernel 2-4-25 smp iptables 1.2.9. I''ve got situation like this: LAN------Linux Box(routing only)------- Linux

Hello, I have problems with htb. The problem is that when I download any file via shaper with htb, the traffic is very dinamic, it jumps, for example: if i have set ceil = 128kbit the results that it jumps from 112kbps to 144kbps or smth like that maybe its not very bad, but when the traffic drops down to 40kbps or less and then after 1 or 2 seconds jumps to 144kbps, its bad :-( and it is often.

Hey, I have such a script: tc qdisc add dev $DEV root handle 1:0 htb default 21 r2q 2 tc class add dev $DEV parent 1:0 classid 1:11 htb rate 100mbit tc class add dev $DEV parent 1:11 classid 1:21 htb rate 512kbit ceil 512kbit tc class add dev $DEV parent 1:11 classid 1:23 htb rate 1024kbit ceil 1024kbit tc class add dev $DEV parent 1:11 classid 1:25 htb rate 3072kbit

I''ve done some tests with TC FILTER and his PRIO and think that is an error or OMISION on TC FILTER DOCUMENTATION from: http://lartc.org/howto/lartc.qdisc.filters.html#AEN1100 Let''s say we have a PRIO qdisc called ''10:'' which contains three classes, and we want to assign all traffic from and to port 22 to the highest priority band, the filters would be:

Hello, I have wrote some scripts to shape about 1000 workstations. My config: Pentium IV - 2GHz, 1Gb RAM, RedHat Enterprise Advanced Server 3, kernel 2.4.21-9.EL, iproute-2.4.7-11.30E.1 2 Gigabit Lan cards in bridge mode. I use htb. Everything work fine, but I have troubles with showing running configuration. # Init shaper root for dev eth0 tc qdisc add dev eth0 root handle 2: htb default 200

Hi, this is a followup to "Problem with HTB and ceil", the problem with the ceiling has been resolved, thanks to the memebers on this m/g. Now I have the problem that packets get into the correct classe with the correct marks but the prios are not respected. I have 4 different classes: 1. voip class / prio 0 / mark 100 / voip traffic 2. ACK class / prio 1 / mark 200 / ACK packets to

Salut lartc (lartc@mailman.ds9a.nl), 18:12:52 kernel HTB init, kernel part version 3.10 18:12:52 kernel HTB: quantum of class 100001 is small. Consider r2q change. 18:12:52 kernel HTB: quantum of class 100002 is small. Consider r2q change. 18:12:52 kernel HTB: quantum of class 100003 is small. Consider r2q change. 18:12:52 kernel HTB: quantum of class 100004 is small. Consider r2q change.

If in one time 3 IP adresses using internet. TC script: DEV=eth0 # LAN SERVER_IP=192.168.1.2 # eth0 ip address tc qdisc add dev $DEV root handle 1: htb default 255 tc class add dev $DEV parent 1: classid 1:1 htb rate 384Kbit quantum 1500 tc class add dev $DEV parent 1:1 classid 1:20 htb rate 128Kbit ceil 384Kbit prio 0 quantum 1500 tc class add dev $DEV parent 1:1 classid 1:21 htb rate 128Kbit

Hi, I have some interesting problem with htb , I set up root class and sub-classess: $TC qdisc add dev eth0 root handle 1: htb $TC class add dev eth0 parent 1: classid 1:1 htb rate 1990kbit ceil 2000kbit $TC class add dev eth0 parent 1:1 classid 1:10 htb rate 190kbit ceil 200kbit $TC class add dev eth0 parent 1:1 classid 1:11 htb rate 1400kbit ceil 1600kbit $TC class add dev eth0 parent 1:1