similar to: tc problem

Hi, I can''t get traffic shaping working. This is my situation: -------- ------ Net1 ----- |router| -------------------- | TC | ----------- Net2 -------- leased line ------ eth1 eth0 We use the leased line for normal traffic but also for synchronisation between 2 servers. The leased line is 2mbit. The synchronisation

Hi all and tc Gururs i have patched the IMQ and htb to kernel, but when i do egress filtering, iam not able to see any traffic and excusted the following the commands modprobe imq numdevs=1 tc qdisc add dev imq0 handle 1: root htb default 1 tc class add dev imq0 parent 1: classid 1:1 htb rate 100kbit tc qdisc add dev imq0 parent 1:1 handle 10: htb default 1 tc class add dev imq0 parent

Hi ! I have a single host which is connected via an 512kbit ADSL link to the n= et. I quite often use some realaudio application that uses some bandwidth = and I want to avoid other traffic to scale that bandwidth down. So I used = some classes (with htb) on imq0 device and applied some filters and it see= ms to work in most cases. However, there are some sites with which downloa= d is

For simplicity, I tried this: tc qdisc add dev eth0 root handle 1: prio tc qdisc add dev eth0 parent 1:1 handle 10: sfq perturb 10 tc qdisc add dev eth0 parent 1:2 handle 20: sfq perturb 10 tc qdisc add dev eth0 parent 1:3 handle 30: sfq perturb 10 tc filter add dev eth0 protocol ip parent 1: prio 2 flowid 1:1 The last line prints: Unknown filter "flowid", hence option "1:1"

How to do ensure a class not lended and not borrowed each other. I do cburst burst 0b ,but ctokens tokens go to negative! --------------------------------- Do You Yahoo!? "更多惊喜，同样精彩，NetVista A30 热卖" --0-611462377-1048485942=:33792 Content-Type: text/html; charset=gb2312 Content-Transfer-Encoding: 8bit <P>How to do ensure a class not lended and not borrowed each

hi stef oone more pb while shaping incoming traffic with imq .this one tc qdisc add dev imq0 root handle 1: htb default 20 tc class add dev imq0 parent 1: classid 1:1 htb rate 2mbit burst 15k tc class add dev imq0 parent 1:1 classid 1:10 htb rate 1mbit tc class add dev imq0 parent 1:1 classid 1:20 htb rate 1mbit tc qdisc add dev imq0 parent 1:10 handle 10: pfifo tc qdisc add dev imq0 parent

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 # tc qdisc add dev eth0 root handle 1: htb default 30 Unknown qdisc "htb", hence option "default" is unparsable Do I need to patch tc? I am running redhat 7.2 and iproute-2.2.4-14 - -- +-------------------------------------------------------------------+ | Luis Miguel Cruz. | |

I downloaded iproute2-2.4.7-now-ss010824.tar.gz and I did patched tc with the htb3.6_tc.diff from htb3.6-020525.tgz and when I try to use a htb script I get just errors. I did not patch the kernel, since I use kernel 2.4.21 and I saw on - HTB Homepage that I need to patch it only if I run version 2.4.20 or earlier. Do also need the kernel patch ? Or maybe is something else wrong? RTNETLINK

Objective: All web traffic originating from my proxy server should be forwarded through interface eth2 instead of the default eth0. The reply should take the same path back to the proxy server. Problem: On the return bout, the kernel doesn''t pass the packet to the higher layers. The reply seems to be getting tossed away between PREROUTING and INPUT Netfilter chains.

Dear All, Sorry to trouble again..... After go through www.lartc.org I have implemented the HTB instead of CBQ for the same scenario. Now following files are under /etc/sysconfig/htb directory. eth0 DEFAULT=30 R2Q=10 eth0-2.root RATE=256kbps BURST=25k eth0-2:10.comp1 RATE=120kbps BURST=12k PRIO=0 LEAF=sfq RULE=192.168.200.0/24 eth0-2:20.comp2

i''m trying to limit upload and download but something is wrong(it is about NAT) i will post here my "script" maybe someone could tell me what is wrong my kernel(2.6.9) is patch with imq(linuximq.net) and my iptables(1.2.11) also #flush tc qdisc del dev eth0 root tc qdisc del dev eth1 root tc qdisc del dev imq0 root tc qdisc del dev imq1 root ifconfig imq0 down

tc qdisc add dev eth0 root sfq perturb 10 I want to set perturb to 8 then i used this tc qdisc add dev eth0 root sfq perturb 8 system give me the following message RTNETLINK file exists I delete the rule by this :"tc qdisc del dev eth0 root sfq perturb 10" please tell me how can i delete the rule by another way and where is "RTNETLINK file"

Hi all, this is really not really very easy to understand, or, to get in. Well, I''ve the following configuration on the router box: LAN - interface: eth0 - network: 192.168.2.5/24 - bandwidth: 100Mbit/s INET interface - interface: ppp0 - network: .dynamic.ip./0 - bandwidth: DOWN=1536kbit/s and UP=256kbit/s the LAN interface is to serve 6 other clients with internet and

i compile the $subj, and found the htb qdisc in it, what version is it?? the tc from redhat knows about htb??? C ------------------------------------------------------- Xnet scaneaza automat toate mesajele impotriva virusilor folosind RAV AntiVirus. Xnet automatically scans all messages for viruses using RAV AntiVirus. Nota: RAV AntiVirus poate sa nu detecteze toti virusii noi sau toate

tc qdisc del dev eth1 root tc qdisc add dev eth1 root handle 10: prio bands 6 tc qdisc add dev eth1 parent 10:1 handle 20: bfifo tc qdisc add dev eth1 parent 10:2 handle 30: bfifo tc qdisc add dev eth1 parent 10:3 handle 40: bfifo tc qdisc add dev eth1 parent 10:4 handle 50: bfifo tc qdisc add dev eth1 parent 10:5 handle 60: bfifo tc qdisc add dev eth1 parent 10:6 handle 70: bfifo # www traffic

Hi, I want work out a GUI interface for htb and now here comes to the part about adding and removing classes and filters. Here is an example script. TC="tc" DEV="dev eth1" echo "Add root qdisc, default traffic go to 1:30" $TC qdisc add $DEV root handle 1: htb default 30 echo "Divide the traffic into different classes and levels" # -------- level 1

Hi, I have a problem with ''tc filter'' on a 2.4.22 kernel from Slackware 9.1 distribution. The tc command binary is from htb3.6-020525.tgz (http://luxik.cdi.cz/~devik/qos/htb) I''m trying the following command sequence: tc qdisc add dev eth0 root handle 1: htb default 1 r2q 1 tc class add dev eth0 parent 1: classid 1:1 htb rate 1200kbit ceil 1200kbit tc class add dev

Hello, Could you tell me how did you solve your problem? I have exactly the same problem but with this configuration: - linux 2.4.20 kernel, HTB option checked - iproute2-2.4.7-now-ss010824.tar.gz installed, which is the latest version I found at ftp://ftp.sunet.se/pub/Linux/ip-routing/, except for "try" or "do not use" versions. I guess I do not need patching iproute2 and

Hello ALL, is there a way to have a device independent qdisc, or a qdisc on some kind of virtuall interface? Background: I have a 5-Interface-Router with one Internet-Uplink. The Router should connect the clients on the other Interfaces to the Internet and to each other client. As i understood the hole TC stuff i can only get influence of outgoing traffic. In my case i can reduce the traffic of

Hello, After reading the excellent HOWTO I got traffic shaping working nicely over ethernet devices on a test setup. I can''t put this setup live though, because our main firewall has three 2mbit hdlc interfaces instead of a single device. We are using multipath routing using iproute2 nexthop at the moment, and that works fine for firewalling. But now I have a need for shaping and