similar to: VoIP using Linux

Andrew: Differentiated Service on Linux HOWTO (work in progress) could be of some help for you. Have a look at http://opalsoft.net/qos Best regards, Leonardo Balliache >Message: 6 >From: "Burnside, Andrew" <Andrew.Burnside@thalesgroup.com> >To: "''lartc@mailman.ds9a.nl''" <lartc@mailman.ds9a.nl> >Date: Wed, 18 Jun 2003 13:24:44

Hi, Can anybody help me out, how to manage or limit bandwidth through iptables while having internet connection on eth0 and working as a gateway in LAN. Thnaks in Advance. Vikram _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Hi guys Finally , after reading a lot of docs from larc/opalsoft/etc, I decided to start learning some QoS First of all I''m trying to shape only download from a iptables+squid+qos machine for 4 machines at LAN ( eth0) Can anyone help me , cause it is not working properly.. ----------------------------------------------------------------- #!/bin/bash # 128Kbps

Hi! I am learning tcng without having experiance of tc and I am trying to build something that shall schedule traffic dependent on the value in the IPv4 packets ip_ttl field. I have read the tcng reference manual and cannot find information about forwarding. Is it possible to farward packets from ingress to egress without sending them upwards in layers?

Hi Guys After reading http://lartc.org/lartc.html#LARTC.QDISC http://www.docum.org/docum.org/ http://tldp.org/HOWTO/Traffic-Control-HOWTO/ http://www.opalsoft.net/qos/DS-21.htm and a wonderful figure from: http://www.opalsoft.net/qos/ds-lb-214.gif I have a newbie question. Suposse next figure: <--- up 128K internet ----- dsl ---------------------eth1 -Linux Qos- eth0 ------ LAN

Hi fellow traffic-shapers, I am implementing a Diffserv CORE router using Linux kernel 2.4.18. I used this excellent website (http://www.opalsoft.net/qos/DS-38.htm) using AFHTB as a starting basis for my EGRESS diffserv implementation - and all works great so far!!! But my project has an additional requirement. There are services running locally on the router which are sending/receiving IP

Anybody knows about one bandwidth meter to use in Bering. This is a script i built, it''s works wel, but it''s not very nice!!! =P #!/bin/bash # Bandwidth Monitor device=eth0 bytes=`grep $device /proc/net/dev | cut -f 2 -d : | cut -d '' '' -f 2` kbytes=`expr $bytes / 1024` actual=$kbytes i=1 x=0 total=0 while [ $i -le 2 ] do x=`expr $x + 1`

Hi to all, i''m following this guide (http://www.opalsoft.net/qos/DS-28.htm), is very detailed, but i''m a bit confused about queuing disciplinse of leaf classes. In this guide the author uses PFIFO (see the scheme that i attached at message) in this way: # tc class add dev eth0 parent 1:21 handle 210: pfifo lmit 10 # tc class add dev eth0 parent 1:22 handle 220: pfifo lmit 10 #

Hi Guys, Using the 2.6.test kernel? Alex and I have done some more tests and this is the patch incase ur using jdg-qos script http://www.digriz.org.uk/jdg-qos-script/index.html#qos-2.6 Thanks K _________________________________________________________________ Winterize your home with tips from MSN House & Home. http://special.msn.com/home/warmhome.armx

Hello all, Can anyone recommend a good book which thoroughly explains QoS from a Linux perspective? Something with TC examples & the like. I''ve looked at the following: http://www.amazon.com/gp/product/1580533418/qid=1148368189/sr=1-2/ref=sr_1_2/102-2819973-6353768?s=books&v=glance&n=283155 Engineering Internet QoS. Thanks.

Hi all, Long email but please be patient :) I am part of EHAS [1], a non profit organization which main goal is to improve the Healthcare assistance in isolated rural areas in developing countries. Recently we have developed a long distance Wi-Fi network in Cuzco (Peru). This network provides connectivity to 12 nodes (they are in fact Health Centers). As VoIP is a essential service in this

Dear folks, Here goes my bandwidth manager: INTERNET | |eth0 202.14.41.1 BW.Manager | | | +----eth1----192.168.1.0/24 | +------eth2----192.168.2.0/24 Total incoming bandwidth to eth0 is 1024kbps should be shared to eth1 and eth2, which mean each get 512Kbps and burstable to 1024Kbps if other host is idle. My question is how do i apply HTB to these situation ? As far as i know eth1 and eth2

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, i''ve been working on VoIP qos in the few weeks. I shape IAX2 and SIP, and i''m getting some interesting results. Im using HTB, the line is 512Kbps dedicated line, and we have some servers on the same line that generate quite a lot of traffic, frequently saturating the link. I''ve read through LARTC how to, example, etc,

Hi, I''m trying to configure IMQ to work on the same machine with frottle (http://frottle.sourceforge.net). The problem is both feed themselves packets through netfilter queueing mechanism, but currently there can only be one netfilter queue per protocol family. To explain why I need IMQ in the first place I have to explain what frottle does. It is a deamon that tweaks the behaviour of a

Hi! I answer to two messages from this thread (I use digest). lartc-request@mailman.ds9a.nl wrote: > > Message: 3 > Date: Fri, 16 Jul 2004 10:51:37 -0700 (PDT) > From: ibro tj <ibb_linux@yahoo.com> > Subject: Re: [LARTC] QoS for Voip. > To: lartc@mailman.ds9a.nl, alessandro.ren@opservices.com.br > > Hi, > > the hint from Martin A Brown which I am

Has anyone ever managed to use GRED and HTB ? Been googling all over the net for hours and did not manage to find any proper implementation. In my case all AF traffic goes into VQ 3 In opalsoft afhtb example traffic goes into VQ 1 & 2 any script will do just fine for me Thanks in advance , Antonio _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl

I try to shape traffic using HTB and mark packets within iptables using PREROUTING. But the filterrules seems to ignore the marks set with PREROUTING Only POSTROUTING marks are accepted. First my configuration I have a router connected to the internet via ADSL over interface ppp0. eth0 is a tunnel to ppp0 and eth1 serves the LAN. LAN is 192.168.57.0/24 on 10Mbit ppp0 is 80.126.16.44 on

Hi. I did send this to `jaazz@post.cz'', but I suspect the list is a more appropriate/useful place for it. It''s a question about Michal Charvat''s QoS extension to Net-SNMP. When I look at the MIB entries for the QoS handles, I get something like this - enterprises.qos.qosObjectTable.qosObject.qosHandle.0.0 = Gauge32: 0

Hello, 7 persons did answer my 1st mail. It is too few. I need more answers to make interesting statistics. I promise this is only for my study and not for any business of any kind ! And if you send it to me this will be anonymous. Thank you to the 7 first and pleaaaaase answer me too. It is only 2/3 minutes. The questions are below for memory. Anyway, this is my last call and the summary will

Hi I''m on my last year and I''m writing my final project about QoS support in Linux 2.4 kernels and, in general, about QoS in Linux OS. My professor asked me about future of QoS in Linux. And I asking you :) What are the difference between QoS subsystem in 2.4 and 2.6 kernels? What are the future plans for evolution of QoS support in Linux. -- Pozdrawiam Marcin