similar to: The Wonder Shaper problem

I just installed Xandros 2.0 Desktop. I used apt-get to install iproute. I then downloaded wondershaper 1.1a from the website. I edited the script as the readme says. I went to console and started the wondershaper script...and i get the following error messages. RTNETLINK answers: Invalid Argument many times. Any ideas what is wrong? MArk _______________________________________________

Greetings, I''m new to LARTC and I''m trying to solve a problem with multiple clients accessing a game server. So I thought I''d give traffic control a shot. I''ve downloaded Wonder Shaper and have added this to the default script: tc filter add dev $DEV parent 1:0 protocol ip prio 12 u32 \ match ip protocol 0x6 0xff flowid 1:3 I''m now quite sure

[I sent this earlier but I guess the list is subscriber-only?] I just set up wondershaper, it has a simple filter on the downstream direction to limit the bandwidth usage: tc qdisc add dev $DEV handle ffff: ingress tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip src \ 0.0.0.0/0 police rate ${DOWNLINK}kbit burst 10k drop flowid :1 This is effective but is there any way to

Hello all, Im new using tc, ive been reading the howto at least 2 or 3 times, but there''s a lot information to aquire all of it quickly. I''ve installed a linux box as firewall for a wireless Network in a hotel, this box is a radius for the access points and it uses iptables to redirect and permit/deny the customers to use the net. So it uses iptables to count the bytes to

Hi, I just installed wondershapper 1.1a on my ipcop firewall box. I have roadrunner cable with a ftp server setup. My download speed is 2mbit (I get 225 KBytes) and my upload is 384kbit (I send at 43 KBytes). What should the settings in wshaper? I can ping yahoo.com at 90msec with little traffic.....and at around 220msec with full upload traffic. Mark

Hello again, I may have a common problem to solve but it seems it is harder than I thought... I have 2 internet providers (each one having a different gateway). Behind the router there are around 100 clients that are SNAT-ed. I want some clients to be SNAT-ed to the first provider, while the others to the second one. The following lines should work: iptables -t nat -A POSTROUTING -s

Hullo :) I appear to be having a common problem, but the standard fix hasn''t worked for me :/ I''m using a 2.4.23 kernel, with QoS options thusly: # QoS and/or fair queueing # CONFIG_NET_SCHED=y # CONFIG_NET_SCH_CBQ is not set CONFIG_NET_SCH_HTB=m # CONFIG_NET_SCH_CSZ is not set CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m

Two easy questions after having read the LARTC HOWTO document (which by the way is a *fantastic* document. Congratulations to all who contributed!) First is: Can I prioritise my "drops" on incoming traffic when the link is overloaded. ie instead of just tail dropping, can I "prefer" to drop certain classes of traffic? If so, do I do this by setting up, say, a HTB tree

Hi, I''ve modified my copy of the wondershaper script to add a few filters that allow traffic to and from a few specific ips go through with a speed of up to 100Mbits... I increased the root from 10 to 100mbit, and added this bit of code a bit further down the script; # Real time hosts for i in 62.101.244.63/32 216.74.158.11/32 216.74.158.3/32 216.74.158.57/32; do tc filter add dev

Hi all. Im having a problem that is driving me crazy. I cant get link fail-over to work in my RedHat9 Linux. I have two ADSL lines exactly the same speed, and im doing NAT with the linux box. Whenever the first line (eth2 in my case) goes down, i run a bash script that i made to change the default route to the backup line (eth0). eth1 is my internal network. I want to be able to make the linux box

I''m rate limiting and prioritizing traffic upstream of a slow wan link using htb, classic wonder shaper type stuff. I''m using the following command for traffic that does not match any of my defined filters: tc qdisc add dev eth0 root handle 1: htb default 50 It appears that local, non-routable traffic like arps and igmp are being snared by this and end-up queued in the lowest

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, been awhile since I''ve written. I now have a situation where I get to use traffic shaping for a client. ~ We implemented the WonderShaper script on our own firewall and experienced no problems. I made some modifications to it to add IPSec protocol packets into the 1:10 high priority class using the u32 filter. ~ So far on our

Hi. Im now decribeing my problem very clearly to see if anyone could help me. I have 3 (three) nics in my system. 1 is for my internet network - (eth1) 2 are for my 2 adsl lines that i use to connect to the internet (eth2 is my "master" adsl line) and (eth0 is my "slave" adsl line). I know that to make redundance work ill have to setup the ip route and ip rule in my

I have a linux server connecto into a 100mps LAN, i use iptables implementation of shorewall (shorewall.net) and then I used the wondershaper. When I adjusted the values below, I got a download speed for vsftp at a whooping 1187.91 KB/s but a upload speed is only a painful 27 KB/s. I dont fully understand the underpinng codes behind the wondershaper htb stuff. can someone guide me on how can i

Hello, I connected the network 192.168.1.0 with 192.168.2.0 over the internet trough a GRE-Tunnel. I don''t know if I set up all things right: The client-pcs in both networks have a subnet mask of 255.255.255.0 and 192.168.2.x''s default gateway is the server wich has started the tunnel. The 192.168.1.x''s default gateway is 192.168.1.250 wich routes traffic destinated to

Hi - I''ve been going through the LARTC how-to and have successfully used the sample scripts (and wondershaper) with my xDSL links. I''m now faced with the challenge of providing 8 users at work an effective remote access connection over a PSTN ppp connection. The critical traffic in this case relates to our stock enquiry application which is running over terminal services.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hi there, what''s difference between wonder shaper and htb/tc? http://lartc.org/wondershaper/ please advice. regards, /vicky -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.5 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFBfuS9pbZvCIJx1bcRAl27AKCldJljOgC89SPKAmPMM4Vwitc3IACdFS3s

we have an external 2Mbit dsl connection and running on it are several gre vpn tunnels so far i''ve given priority to the vpn traffic (using htb) can i now put rules in for the tunnels to control traffic within each tunnel (that''s where our video conferencing etc runs)? or can i only control the real interface (eth1 in our setup)? if not can i somehow see the packets inside the

Hi all Does anyone know if i can use ethernet aliases like eth0:1 in advanced routing like multipath routing in order to avoid to have nxEthernet interfaces in my Linux box. Thansk in advanced -- Guillermo Gomez <ggomez@neotechgw.net> neotech _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:

Hi, i have one firewall/gateway server with two interfaces and a routing problem (?). eth0: external interface eth1: internal interface. Both ip address are valid. Services like DNS, HTTP is configured to run using eth1 ip address. The problem is when i try to connect from internet to firewall, i can´t see eth1 ip address... only eth0 ip address. So, when i try to connect to web