similar to: Problems using The Ultimate Traffic Conditioner from the Cookbook

Hey, fellow LART controlllers, I''d like to ask if someome has a real esfq experience with HTB class hierarchy and esfq qdiscs. Lets say that I want to unite the connections to 10 client PCs with u32 or fw filters (doesn''t matter which one in fact) into one HTB class with esfq qdisc at the end. Did anyone tried it, and more important, did it worked the way it is supposed to? As

During my tests I''m starting to feel stupid :). Traffic shaping works quite on its own. System: RedHat 7.3, RedHat kernel 2.4.18-18.7.xsmp, HTB version 3.6, interfaces eth0 and eth1 are acting as bridge br0. If TCP shaping almost works, it just exceeds limits UDP is not shaped. Traffic flows PC=>eth0=>eth1=>PC. Statistics shown is for just UDP traffic (1mbit of small udp

Hello one more time, As others seem to already asked without reply, I''m getting lower speed rates than specified via ingress. How do I know. Because I have this in my script: tc qdisc add dev $DEV handle ffff: ingress # Filter intranet traffic, so fit it to intranet speed tc filter add dev $DEV parent ffff: protocol ip prio 10 u32 \ match ip src $Q_2_HOSTS \ match ip dst

Hello good day to all ... this is my setup 1 Linux Wireless Access Point, connected are 4 wireless gateway in which i needed to apply shaping ... ok here is the weird part... clients on each gateway download files from the Acess Point ... a 500 mb file through ftp on gateway 1 which is up to 64 kbps ... the result is from 60-64 kbps speed which is fine ... on gateway 2 which is 128 kbps ... the

Hello everyone: As it is known, when you limit uplink bandwidth it usually gets downlink bandwidth to a lower value. I just want to know what is the optimal configuration for eth1 and imq0 according to some variables of tc(HTB), txqueuelen, mtu, etc. to make these packet flows less independent on an ethernet based network. Thank you in advance. -Diego

hi i ve seen one of your replies here and i saw that you receomend 2 modifications in the kernel files in order to improve htb. first in pkt_sched.h, changing PSCHED_JIFFIES to PSCHED_CPU. and then, sch_htb.c, changing HYSTERESIS from 1 to 0. is it that simple? i mean i just change these here variables and i get better results? i ve done a search and found the first file in 3 locations. where

Dear friends: I was analizing the HTB script at "The ultimate traffic conditioner", at the Cookbook, at Lartc. I have a very basic question: First, it is defined the root htb qdisc, as expected; then, it is defined the main (parent) htb class, with the total uplink as rate, also as expected; then, they are defined 2 child clases: first of them has also the total uplink as rate (!)

Hi, New to traffic shaping I would like to make some tests. It''s for a production server (fw), using 2.4.27 kernel. Something is not clear to me about HTB... is the last stable version included in the 2.4.27 kernel and iproute2 (iproute2-2.6.8-040823.tar.bz2) ? Are there special patches to apply ? EC. _______________________________________________ LARTC mailing list /

Hi, machine: AMD K6 200 MHz Linux distribution: Mandrake 8.1 kernel: compiled 2.4.21 applied this: #define PSCHED_CLOCK_SOURCE PSCHED_CPU in file linux/include/net/pkt_sched.h bevore compiled the kernel (described on http://www.docum.org/stef.coene/qos/faq/cache/40.html) bandwitch on eth0: 128kbit The most simple configuration - 122kbit guaranted for WWW (sport 80) and

I am having problem in ping or connect AP from Mobile Node(essid & channel is the same,maybe routing did not set properly but i fail to configure with route add default gw 192.168.3.4,its alway said network is unreachable ),My Mobile Node is using acx100 as driver while AP(redhat 9.0) is using HOSTAP 0.1.3.Any one can help? I heard How-To said we not need to set address on eth0 & wlan0

Hi All, If I have a vlan-Id on an interface with an ipv6 address, then I am unable to ping a real router. The problem is that the Neighbour Solicitation originated from the Centos machine is missing the Vlan-Id in the packet. Therefore a real router will drop such a packet. I have tried this with Centos 4.7 and with Centos 5.5 with the same result. If I originate the first Neighbour

>Hi everyone, and thanks for your help so far. > >I have been playing around with tc and htb for a couple of weeks now, and >while I am nowhere near understanding everything here, I am beginning to >know more about packets than I ever wanted to know. > >I have two university buildings with a 1mb connection to the Internet. The >two buildings (on either side of town) are

Hi again, sorry to be such a bother. I got my setup to work with kernel 2.6.8.1, however the two machines where I need to implement the shaping are running a 2.4.27 kernel. I have applied the infamous June patch (htbfair.diff) already, and recompiled the modules. And I am using the tc that comes with htb3.6-020525.tgz. While I can see the packets going into the right class, it does not

What is the maximum value for "prio"? It seems that for htb its maximum is 7. Is that right? R. -- ___________________________________________________________________ It''s so simple to be wise. Just think of something stupid to say and say the opposite. +------------------------------------------------------------------+ | Richard Lucassen, Utrecht

Hi again, I was just looking around for ESFQ sources, and I see that the main site is down, and only has kernel 2.6.4 patches. Is ESFQ maintained? If so, where can I find patches for 2.6.10? Thanks, -justin _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

I have a *big* problem with Access 2000 running on a Windows 2000-SP2 PC on 2.2.3a. The error: "Visual Basic for Applications Project in This Database is Corrupt" I have a log level 10 of the 2.2.3a samba for that machine. Then, I returned to 2.2.2 and did the same thing (log level 10). No error! When I go back to 2.2.3a, I can create the problem over and over again. Who wants

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#ffffff" text="#000000"> <font size="-1"><font face="Verdana">Hi all!<br> <br> Hopefully

Hi everybody, I''ve got a little problem when adding HTB support to my SUSE 8.1 by patching its kernel 2.4.19. After i patch kernel getting some errors, the HTB kernel option shows up but when i make modules it finds something wrong with the sch_htb.o module. Could somebody give me a hand on this? Thanks in advance. I get this information when patching (patch -p1 <

Hi, I am trying to install a proprietary qdisc made for research, it is not publically released yet, however its been used several times so i know it works. The files included are: q_xcp.c: static int xcp_parse_opt() static int xcp_print_opt() static int xcp_print_xstats() struct qdisc_util xcp_util = { "NULL", "xcp" ..... }; sch_xcp.c: static int

Hi all, I try to receive an ipv6 address for my PPP link via autoconf (against Cisco machine), but there is a problem I'm unable to solve so far. I can see cisco's Router-Advertisement containing prefix etc., but no IP adress is assigned to tun0 interface. Anyone succesful in IPv6 over dial-up PPP connection? When I manually assign IPv6 address, connection works. My system is