similar to: Routing problems

hi. When I execute follow class setting qdisc 1:0 root htb default 2 parent 1:0 classid 1:1 htb rate 10Mbit ceil 10Mbit parent 1:1 classid 1:2 htb rate 10kbit ceil 100Mbit HTB: quantum of class 10001 is big. Consider r2q change. <7>htb*g j=1014xxxxx HTB: quantum of class 10001 is big. Consider r2q change. <7>htb*g j=1014xxxxx HTB: quantum of class 10001 is big. Consider r2q change.

Dear. folks I want to shaping FTP traffic. I can get following information from Stef Coene's Homepage, www.docom.org. "Ftp uses random ports, so matching the data traffic is not easy. However it can done if you use iptables to mark ftp-data packets and use that mark with the fw filter. For more info see http://home.regit.org/connmark.html. " General information about the conntrack

Hi list, I have an ipcop 1.3.0 with one regular ip address on its green (internal) interface 172.25.0.1 with one subnet 172.25.0.0/22 related to it. In addition I have assigned two further ip addresses 172.25.64.1. and 172.25.68.1 to right that green network card with two respective further subnets 172.25.64.0/22 and 172.25.68.0/22 related to each for certain reasons. Now I want to force all

Hello, I assign IP 172.25.0.1 and 172.25.1.1 on one interface of my router. This interface is connected to local LAN switch. If I ping from my box on lan with IP 172.25.0.22 I get icmp reply, but if I assig to my box IP 172.25.1.22 I don''t get icmp reply. My setup: ip addr add 172.25.0.1/24 brd + dev eth0 ip addr add 172.25.1.1/24 brd + dev eth0 kernel 2.4.3, iproute2-current,

We switched over from a bordermanager firewall to a shorewall firewall. Some stuff is not working now. I realized that I had not created the route for the network that is not working however once I created it, it still didn''t work. Most of our network is fine however some pieces are not working. [Net] - [Shorewall] - [LAN] - [Cisco] - [Clients and servers not working] The firewall

Hello, I have a problem here with: [root at ablprx01 squid]# cat /etc/*release CentOS release 5.2 (Final) [root at ablprx01 squid]# rpm -qa|grep -i squid squid-2.6.STABLE6-5.el5_1.3 The web proxy process (used by 300-400 users) seems to run ok: [root at ablprx01 squid]# ps uawwwx|grep squid root 2304 0.0 0.0 7792 1268 ? Ss 08:45 0:00 squid -D squid 3082 27.7 0.9

I have Samba running without a PDC and I have some questions about the advantages for implementing one with Samba vs. the problems and disadvantages. Perhaps some kind souls can help me determine whether I should do this or not. We have three offices connected by a Checkpoint VPN, plus people "on the road" using their SecureClient tool. We want everyone to be able to get to all the

Hi, I had a Debian woody server with samba as PDC with LDAP backend in the same box, and mixed windows clients (98, XP, etc). The clients accessed a 75MB MS Access database (.mdb) that was put in a Samba share. Everything was fast... everything was good... But, last week I decided to upgrade to debian Sarge, so as you know Samba was upgraded to Samba3 too (3.0.14a), and now if a user tries to

I'm trying to establish a two way non-transitive trust between a W2003 A/D box and our SAMBA domain. We are using smbldap so we can log in on any of the linux boxes with the same passwd. Samba is version 3.0.33 on Redhat Enterprise. It's easy to create the trust on the Windows side with AD Domains and Trusts but on the Linux side I'm not sure if I need to put the machine account

-----BEGIN PGP SIGNED MESSAGE----- Hi everyone - Someone I''m working with has a requirement to map ethernet card addresses to unique IP addresses, and then have a Linux IP masquerade server know of this mapping list and not allow any data to pass from any ethernet card that a) it doesn''t know about, or b) isn''t assigned the right IP. Ideally it would also log this

Dear All, We have an access database running on a Samba share (Samba version 3.0.10-1.4E) with a gigabit connection to the network. The front end of the databases are on the client machines with linked tables stored in a separate mdb file on the linux server. For some reason the database runs very slowly when it is set up in this way. I tested copying a 10 MB file onto the samba share and it

Hi There, We use samba4 for a while now and i've always been able to move a machine from the default-first-site-name to a newly created site but since the recent version (sadly i don't now exactly which) but for sure with 4.0.13, 4.1.3 and 4.1.4 that became impossible. Resulting in a crashing AD Sites and Services application and a crash in samba4 (need to restart samba4 to be able to

Hi There, We are getting INTERNAL ERROR: Signal 11 in pid on multiple different servers (Debian Wheezy, using Samba 4.0.13 and 4.1.3, using kernel 3.2.0-4 and 3.11.6-2), the outcome is always the same. The group policies can no longer be applied to the clients until a Samba4 restart. The locations with these issues do have in common that they have multiple Samba4 DC's although i am not