similar to: forwarding in tcng

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Is there any grapical interface for the QoS (Quality of Service) Traffic Control in Linux ? Greetings. - --- Carles Xavier Munyoz Baldó carles@descom.es Descom Consulting Telf: +34 965861024 Fax: +34 965861024 http://www.descom.es/ - --- -----BEGIN PGP SIGNATURE----- Version: PGP 6.5.8

Hello all, Please could someone help me with this, I have been trying for days to get this to work. I would like to have BE, AF & EF classes with HTB qdisc. I can''t find any scripts online where this has been done. If I enable this filter: #tc filter add dev eth0 parent 2:0 protocol ip prio 1 \ #tcindex mask 0xf0 shift 4 pass_on then BE & AF classification seems to be fine but

I''m successfully using HTB + GRED to shape traffic based on the DSCP field. I would like to strip the DSCP and possibly replace it with normal ToS bits on egress traffic leaving my network. Leaving DSCP set is pointless, and could potentially cause problems with some ISPs that use DSCP internally I suppose. Setting ToS bits would seem ideal as most networks still honor it to varying

Hello, I have the following proplem. My DiffServ configuration is working fine when I do ping, but when I use mgen the packets are not detected at the core router. Here is my core router configuration: #!/bin/bash tc qdisc add dev eth1 handle 1:0 root dsmark indices 64 set_tc_index tc filter add dev eth1 parent 1:0 protocol ip prio 1 tcindex mask 0xfc shift 2 tc qdisc add dev eth1 parent

Dear all can anyone tell me how to mark packet''s DSCP value using tc? Thanks. Regards, philip -- Hong Kong IP Multicast Initiative (HKIPMI) Department of Information Engineering The Chinese University of Hong Kong Phone : 2603 5240 Fax : 2603 5032 _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl

Hi all, I have a little problem with my home-made slackware linux server. Here is the scenario: 1. I have a local wifi network 2. my server do masquerading and exit in internet via a PPPoE connection Goals: 1. not use SQUID 2. shaping the traffic with classes 3. emule connection must have minimum priority and a band-limit of 10KBytes/s in uplink (server--->internet) Any idea? Thx, Diego --

... is on SourceForge, http://tcng.sourceforge.net/#src Besides a bunch of bug fixes, this release also contains a greatly improved version of the comtc utility that copies comments from the tcng source to tcc''s "tc" output. There are a few infrastructure changes to make comtc work smoothly: - tcc''s -E option is now called -Wexperror or -Wexppostopt, respectively

Hello, its me again, I won''t stop sending emails to this list, until I solve this problem, I''ve tried several apps to create the right htb rules (even made them my self), but I always get the same results, traffic gets shaped, but I can''t use my bandwidth, and this is weird, because I should be able to, also I keep seeing download being limited too, and that

hi, i was looking tcc --help, there seems to be no way to tell tcc to generate output only for specified device i.e. tcc -device eth0 m''I mistaken ? thanx raptor _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hello. I have been trying to duplicate these u32 matching rules using TCNG, but without much success: tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32\ match ip protocol 6 0xff \ match u8 0x05 0x0f at 0 \ match u16 0x0000 0xffc0 at 2 \ match u8 0x10 0xff at 33 \ flowid 1:10 Wondershaper 1.1a implements this and if I run it things seem to be shaped as expected. But this TCNG

... is on SourceForge, http://tcng.sourceforge.net/#src This one has the first steps towards getting non-IPv4 classification right: - I''ve added fields for skb meta-data (meta_protocol, etc.) - if USE_META_PROTOCOL is #defined (tcc -D... or tcsim -Xc,-D...), ip_hdr and ip6_hdr check the protocol number - if_u32 generates distinct classifier branches for each protocol - f_fw,

Hello all, I am trying to set up a simple htb based system, where packets with source ip 10.0.0.1 should have their own class. I plan to use tcng to set it up easier. Is there something wrong in my tcng file ? ~/tcng$ cat htb /* */ #include "fields.tc" #include "ports.tc" dev eth0 { htb ( ) { class ( rate 600kbps, ceil 600kbps ) {

Greetings all, OK - just started playing around with traffic shaping - have imq and htb and (I think) everything else I need in the kernel and running well. My initial lab task was to protect a H.323 session over a simulated half T1 while adding bulk traffic - got that accomplished after slogging through learning tc and decided in short order that a more intuitive interface would be

Hi, I am trying to get assured forwarding/expedited forwarding with gred and htb working. Below is the script I am using. The following steps are what I thing is how the script works. My problem is that if I remove the HTB qdisc from the script and have the GREDS parent as the dsmark it works, but when I add the htb as a parent of GRED and DSmark the parent of htb it does not work? Any

Is there a flow diagram as to where tc actions take place with respect to NAT and other iptables functions on a multihomed box (private & public NICs) ? Are tc filter rules consulted before or after NATing? My real interest is in basic understanding first, and then solving a real problem second. Example: Firewall Public NIC 123.123.123.1 Firewall Private NIC 192.168.168.1 Dedicated Video

Hi, I am trying to implement a simple scaled-down version of the AF traffic class type. As such I basically want to remark non-conforming AF11 packets to AF13. Here is m script that I have been using on the ingress router of my network: ---------------------------------------- Link=''dev eth1'' Rate1=''rate 800Kbit'' Rate2=''rate 2500Kbit''

Dear all, I''m making a script to implement DiffServ policies with HTB. Here it is : if test $1 = "help" -o $1 = "h" -o $# != 5 then echo "usage: ds.sh <DEVICE> <DS_RATE> <EF_RATE> <AF_RATE> <BE_RATE>" exit fi DEV=$1 DS_RATE=$2 EF_RATE=$3 AF_RATE=$4 BE_RATE=$5 sync tc qdisc del root dev $DEV tc qdisc add dev $DEV root handle

Hi all, I''m trying to get some DiffServ QoS shaping to work on an XScale machine, running big endian. I''m setting it up with tc. Using the tcindex filter I found that regardless what shift value I enter, only ''0'' is returned when I list the filters afterwards. The very same rules work fine on my (little endian) PC. Looking at the code

Hello all, This is just a self-aggrandizing note to inform you all that my rather brief introduction to traffic control using tcng and HTB is available now on TLDP. http://tldp.org/HOWTO/Traffic-Control-tcng-HTB-HOWTO/ I welcome any criticism. -Martin -- Martin A. Brown --- SecurePipe, Inc. --- mabrown@securepipe.com _______________________________________________ LARTC mailing list /

How To Installing tcng at slackware 10.1