similar to: tc filter oddities

Hello. I have a linux server connected to a gigabit lan, and though that lan to a 768kbps/768kbps DSL modem. I''m trying to shape my webserver running on port 80/443 down to 512kbps, while leaving all other ports alone. The current configuration script that I''m using is as follows: tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 99 tc class add dev

Hi all, Can you tell me where is the documentation for the new IFB (implemented in kernels > 2.6.16). Thanks in advance! Nikolay

Dear All, I''m using the kernel 2.6.6, iproute2-2.4.7.20020116, iptables v1.2.9, and gentoo. I have a leased-line 64 kbps. I can see the counter works in iptables, but in the htb, it doesn''t go to the right class (it always go to the default class). Any help will be appreciated here''s my htb conf #!/bin/bash tc qdisc del dev eth1 root tc qdisc add dev eth1 root

Hi all. I''m going on my 3rd week trying to get a simple traffic shapping to work the right way :( !! My goal it to shape the traffic coming from one machine (pc1) to another machine (pc2) throught the "eth0" interface. My test configuration is as follows: PC1   IP: 192.168.105.237   Mask: 255.255.255.0   OS: Red Hat Linux Kernel 2.4.20-8   Rules:

Hi there good people, I''m a newbie in what concerns running Linux on machines other than desktops, so I need help from all you gurus out there :-) I have Linux installed on an old computer (Winchip C6, Pentium clone), acting as a router/firewall for two other computers. Both these machines are connected to the firewall via a dedicated ethernet card each, on different subnets,

Hello list, I discover strange behaviour of shaping traffic that i setup from Shorewall-4.0.2. I know that this is not Shorewall problem but may be somebody from list can help me or explain this situation. I have follow interfaces in 'tcdevices' files: #INTERFACE IN-BANDWITH OUT-BANDWIDTH # $EXT_IF 500kbit 248kbit $INT1_IF 500mbit

dear All, I'm a new student and my job is too shapping bandwith for our campus faculty network. I want to implement htb with Redhat-9.0 distro. does this distro kernel support htb and tc good ? or i should apply some patch or upgrade kernel ? regards reza

----- Original Message ----- From: Michał Joachimiak To: lartc@mailman.ds9a.nl Sent: Tuesday, July 20, 2004 3:45 PM Subject: HTB - Really Big problem Hello everybody! Since week i dig lists and www and can''t find solution for my problem. I''m using HTB 3.13 kernel 2-4-25 smp iptables 1.2.9. I''ve got situation like this: LAN------Linux Box(routing only)------- Linux

Hello, I use HTB with linux-2.4.20-ac1 and iptables-1.2.7a (pathced for IMQ). I configured one HTB qdisc on an IMQ device. This qdisc has some classes (about 5) and all of the classes has qdisc pfifo. I sometimes got out from my linux (while I was working) and I found in logs: Dec 4 11:49:27 core kernel: HTB init, kernel part version 3.7 Dec 4 11:49:28 core kernel: HTB: quantum of class

Hi, I am currently working on the TC. I have seen some behaviour which seems to be odd. I know someone in the mailing list would have seen this problem or may have some fix for this problem. When I try to include u32 filters with different priority or pref, I could see the filters being set on all the priority''s irrespective of the priority number. See my sample script below and the

Hi How can I control which filter a packet will meet first? I have tried changing the order of applying the tc filter scripts and switching flowid number, but ''protocol ip u32 match ip src <ip net> match ip src 0.0.0.0/0'' always kicks in first? >From my script -------------------- # All traffic - Priority: Low tc filter add dev eth0 parent 1:0 prio 2 protocol ip u32

Hello I have few questions regarding tc functionality (qdiscs, classes, etc.) when vlans are in use. For example, consider interface eth0, for which I create and extra vlan with vconfig, let''s say eth0.11. Then using tc I can add usual things - qdiscs, filters, ... - to both eth0 and eth0.11. The questions are: - on which interface - virtual or real, should I actually use tc ? Or

Hi folks. For quite a while, I tried to use linux (cbq and htb) to control bandwidth in order to replace a cisco equipment used to play this role on our network. After trying here and there, with a bunch of different distros, different versions, different compilations, ... the closest I could get was as follows: (using htb.init and cbq.init) Desired BW ==> Achieved BW 128k ==> 404.78

I''m trying to shape traffic on a Devil-Linux box. This note was originally sent to their maillist, because the LARTC list appears to have been down for the past few days. My mailbox was just flooded with a half dozen or so confirmation requests in response to my repeated attempts to subscribe to this list. ---------- Forwarded message ---------- From: drew einhorn

Hi I have setup iproute2 and need a bit of help reading the stats from it ===== output qdisc htb 1: r2q 10 default 20 direct_packets_stat 0 ver 3.17 Sent 547326809 bytes 1342627 pkts (dropped 9303, overlimits 2817572 requeues 0) backlog 46p qdisc sfq 10: limit 128p quantum 1514b flows 128/1024 perturb 10sec Sent 41874343 bytes 730889 pkts (dropped 0, overlimits 0 requeues 0) qdisc sfq

Hi, I''ve failed miserably in my endeavours so far and I''m at the point where help would be much appreciated. I want to have 3 bandwidth limited classes on my Internet interface. In each of those classes I want 3 prioritization bands, and then use "tc filters" to place the traffic into the correct class and priority. The problem is that the traffic

With the below script, whenever I ping 10.0.16.10 (which matches the only filter I have), traffic still get''s sent to the default 1:2 class instead of 1:1 and I don''t know why... Any hints? (kernel 2.6.12, iproute2-2.6.15) tc qdisc del dev eth0 root > /dev/null 2>&1 tc qdisc add dev eth0 handle 1: root htb default 2 tc class add dev eth0 classid 1:1 parent 1: htb rate

Hi list, I''m playing with tc and found a strange behavior when I try to delete filters. For example, this simple scenario: tc qdisc add dev eth1 root handle 1: htb default 100 tc class add dev eth1 parent 1: classid 1:1 htb rate 128Kbit tc class add dev eth1 parent 1: classid 1:2 htb rate 258Kbit tc class add dev eth1 parent 1: classid 1:100 htb rate 32Kbit tc filter add dev eth1 parent

Hello, I have recently started looking at tc and iptables. I have an htb-queue with two classes 1:10 and 1:20 where 1:20 is the default. Then I use iptables to mark all packets I send out on eth1. I then filter marked packets into class 1:10. I expected all packets sent on eth1 to end up in class 1:10, but some packets still go to 1:20. Did I do it wrong? Thank you for any help. regards, David

Hi, I wanted to implement some QOS on my Linux Box with HTB, but after some time spend on the configuration and tests, I still don''t manage to have some correct results. Here are the details : -ROOT 2000 kbits -HIGHPRIO SUBCLASS 50 kbits prio 0 -SUBCLASS1 750 kbits prio 1 -SERVICE1 250 kbits prio 1