similar to: tc filter problem with 2.4.22

I downloaded iproute2-2.4.7-now-ss010824.tar.gz and I did patched tc with the htb3.6_tc.diff from htb3.6-020525.tgz and when I try to use a htb script I get just errors. I did not patch the kernel, since I use kernel 2.4.21 and I saw on - HTB Homepage that I need to patch it only if I run version 2.4.20 or earlier. Do also need the kernel patch ? Or maybe is something else wrong? RTNETLINK

The manual says (about prio): > Because it doesn''t actually shape, the same warning as for SFQ holds: > either use it only if your physical link is really full or wrap it > inside a classful qdisc that does shape. The latter holds for almost all > cable modems and DSL devices. I want to wrap prio inside of tbf. Here''s why: I have a server on a DSL line, which has

tc qdisc add dev eth0 root sfq perturb 10 I want to set perturb to 8 then i used this tc qdisc add dev eth0 root sfq perturb 8 system give me the following message RTNETLINK file exists I delete the rule by this :"tc qdisc del dev eth0 root sfq perturb 10" please tell me how can i delete the rule by another way and where is "RTNETLINK file"

Hi, I have some interesting problem with htb , I set up root class and sub-classess: $TC qdisc add dev eth0 root handle 1: htb $TC class add dev eth0 parent 1: classid 1:1 htb rate 1990kbit ceil 2000kbit $TC class add dev eth0 parent 1:1 classid 1:10 htb rate 190kbit ceil 200kbit $TC class add dev eth0 parent 1:1 classid 1:11 htb rate 1400kbit ceil 1600kbit $TC class add dev eth0 parent 1:1

I''m using htb classes on my firewall to queue traffic and implement different restrictions on different protocols. tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 190 tc class add dev eth0 parent 1: classid 1:3 htb rate 2mbit burst 30k tc class add dev eth0 parent 1:1 classid 1:90 htb rate 50kbit ceil 384kbit burst 5k tc qdisc add dev eth0 parent 1:90 handle

A question about the tc binary and diff file that are included in htb3.6-020525.tgz. I can''t seem to patch tc in the source tree, and that has made me hesitate to alternatively substitute the native /usr/sbin/tc for the binary supplied with the patch materials. I''m running kernel 2.4.19-r9, and when I run xingu:/usr/src/linux #patch -p1 --dry-run < ../htb3.6.tc.diff the

This is one of my test classes: class htb 1:10 parent 1:1 prio 0 quantum 2048 rate 160Kbit ceil 400Kbit burst 1803b/8 mpu 0b cburst 2111b/8 mpu 0b level 0 Q1: where does "level 0" stand for? Q2: where does this b/8 stand for? Q3: this is on a i386 platform, so timer resolution should be 10mS. According to the doc the minimal burst should be 10mS*160Kbit=1600. Why is it 1803? Q4: I

Hello! I recently upgraded my computer from Mandrake 8.2 to Mandrake 9.0. I used a very slightly modifed WonderShaper and it worked beautifully. But now when I try to run the same cbq shaping script on Mandrake 9.0 i get this output RTNETLINK answers: Invalid argument RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or

Hi ; MY script: tc-htb3 qdisc del dev eth2 root ipchains -F tc-htb3 qdisc add dev eth2 root handle 10: htb default 20 r2q 40 tc-htb3 class add dev eth2 parent 10: classid 10:1 htb rate 50Mbit burst 2000 tc-htb3 class add dev eth2 parent 10:1 classid 10:100 htb rate 12mbit ceil 50mbit prio 1 tc-htb3 class add dev eth2 parent 10:1 classid 10:20 htb rate 38mbit ceil 50Mbit prio 8 ipchains

Hello, I've noticed a strange delay while booting a CentOS 7 guest on a CentOS 7 host with slow disks (7200RPM) with write cache off. The guest and host are freshly installed Centos 7 (host was fully patched before guest install). Guest is installed on an lvm pool residing on an md raid1 with two SATA 7200 RPM drives with their write caches off. The delay is on mounting /boot, the dmesg

Hello.. I have a linux box and I want to make priority on traffic generated by my LAN''s computers.. I don''t have a guaranted bandwidth, so I wanna use sfq... I want to make traffic to port 80 , 443 , 25 & 110 PRIORITY 1 Traffic src or dest 192.168.0.2 to make priority 2 And the rest to put it in proiority 3.. I did the following : tc qdisc add dev eth0 root handle 1:

Hi, tc qdisc add dev eth0 root handle 1: htb tc class add dev eth0 parent 1:0 classid 1:1 htb rate 2000Kbit ceil 2000kbit tc class add dev eth0 parent 1:1 classid 1:2 htb rate 1200Kbit ceil 2000kbit tc class add dev eth0parent 1:1 classid 1:3 htb rate 800Kbit ceil 2000kbit tc class add dev eth0 parent 1:2 classid 1:21 htb rate 600Kbit ceil 2000kbit tc class add dev eth0 parent 1:2

This is my first attempt at understanding lartc: I want to throttle outgoing bandwidth fo a certain tcp port and leave other traffic the way it was. so I put a prio qdisc at the root of eth0 (dummy priomap since i want to use filters to switch bands): $ tc qdisc add dev eth0 root handle 1: prio bands 2 priomap 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 then attach a tbf qdisc at 1:2 : $ tc qdisc add dev

Hi All, concerning the problem when running the "ip ru ls" command. I faced with the same problem, and I solved it by making sure to include the following settings into the kernel configuration (2.4.18): CONFIG_IP_ADVANCED_ROUTER=y <=== CONFIG_IP_MULTIPLE_TABLES=y <=== CONFIG_IP_ROUTE_FWMARK=y CONFIG_IP_ROUTE_NAT=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_TOS=y

Hello, i´ve installed a Suse 8.1 minimal System with iproute 2.4.7 and iptables, Suse default Kernel 2.4.19. When I start the Wondershaper 1.1a Script I get the following Error: CBQ: "allot" is required to set WRR parameters. /home/skripte/./wshaper: line 72: allot: command not found CBQ: "allot" is required to set WRR parameters. /home/skripte/./wshaper: line 78: allot:

Hi, Will TC work on 2.4.21 kernel without any patches? If it does, why tc command failed? For example, # tc qdisc show dev eth0 RTNETLINK answers: Invalid argument Dump terminated Thank you for your help! Reed --------------------------------- Do you Yahoo!? Yahoo! Small Business $15K Web Design Giveaway - Enter today

it is posible to do more than 2048 filter rules and classes like this: /sbin/tc class add dev eth1 parent 1:15 classid 1:101 htb rate 1kbit ceil 6128kbit prio 1 quantum 1500 /sbin/tc filter add dev eth1 protocol ip pref 0 parent 1: u32 match ip dst 10.10.24.17 flowid 1:101 /sbin/tc qdisc add dev eth1 parent 1:101 handle 101: sfq /sbin/tc class add dev eth1

I posted earlier when I noticed that htb was releasing packets in pairs, even though my burst/quantums were 1 pkt. To fix I set HTB_HYSTERESIS 0 in net/sched/sch_htb.c . This gives a noticable gain in upstream worst case latency, for me with 256kbit/s up I used to see +90 sometimes, now it''s +45. For the many who have 128 up it should limit them to +90 rather than +180. Andy.

Hi, can any body suggest any tool which can show the utilisation for individual classes for HTB. preferable written in C/or shell script. Regards Jayesh ------------------------------------------------- Still single? Click here to find the perfect match. http://www.bharatmatrimony.com/cgi-bin/bmclicks1.cgi?141

Hi, we r using HTB algorithm,for traffic shaping, we are facing a problem. we are able to create multiple classes,filters. But when we delete 1 filter all filter gets deleted. how do we avoid that. waiting for you reply Regards Jayesh ------------------------------------------------- Shop & Save at Sifymall.com! Special Festive Offers - up to 60% off on DVD players, MP3 Players. Mobile