similar to: Virtualization question

Hi all, I've recently upgraded a system from CentOS 4.4 to CentOS5, and now when the system boots, the r8169 ethernet card doesn't come up. After the boot sequence, if I type "ifup eth1 | ifup eth1.10 | ifup eth1.203" then the adapter starts up ok. It seems to be something with the boot sequence it loads the ethernet adapters a different way around (ie 4.4 eth0 is now

Has anyone gotten this to work under CentOS 4.5? When I choose RDPv5 I get this error: ERROR: modulus len 0x108 ERROR: send: Connection reset by peer ERROR: Connection closed When I try just RDP, I get: ERROR: modulus len 0x108 ERROR: send: Connection reset by peer -- --- David Woyciesjes

Hi list, I've made a new CentOS 5 install with all updates. My users are sored in a ldap directory. If i reboot the machine, CentOs hangs at: starting messagebus I found the same problem at Fedora 5. The solution should be to change "etc/init.d/ladp" from 27 to 21 so it starts before messagebus (22) So is this the "right" solution or is there a other way? Thanks

Hi, I applied a set of iptables rules and started iptables without any trouble. But after i edited the rules and restarting it, it gives me "Applying iptables firewall rules: iptables-restore: line 35 failed". I looked into /etc/sysconfig/ for the mentioned file and it was not found. I did a quick check and locate only found /sbin/iptables-restore. I had done updatedb before using

Hi, I am searching smbmount command on centOS 5. On, CENTOS 4.4, I used it as follows to backup data to a window PC. I want to do it on CentOS 5 now. mount -t smbfs -o ip=192.168.5.225,username=mailbackup,password=secret //server/mail_backups /mnt/maildaily I can not issue such command on centos 5. When I try , It gives below error. [root at mail ~]# mount -t smbfs -o

Hi, I'm using CentOS 5 on all my computers here (work + home) and I'm very satisfied with it. Some time ago I purchased a 300 GB external hard drive to store films, music, pictures and documents. Since there's no Windows machine around here (small South French village, town hall and public library use Linux :o)), I replaced the FAT filesystem on the disk by an ext2 filesystem.

Hi all, I have a problem with Sendmail in CentOS 5. I want use authentication for external access. I configure my sendmail.mc: TRUST_AUTH_MECH(`EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl But when send a message, show this message: Relaying denied. Proper authentication required. Any idea of

Does anyone know how to diagnose the error "Unable to handle kernel paging request at virtual address xxxxxx"? I got this error (followed by a panic and a crash) on a server running CentOS 4.4 with the 2.6.9-42.0.8.ELsmp kernel. The machine is based on an Intel 975XBX2 motherboard (975X chipset). I have built several of these and they have been extremely stable. This one is

I've got CentOS 5 installed on my hp pavilion ze 5300 laptop and the network configuration UI says my wireless NIC has been correctly identified and assigned what appears to be the right Broadcom device driver on eth1. However, the inteface doesn't come up. Google doesn't find anything recent about using Linux with Broadcom except for someone's passing remark that Ubuntu 7 beta

I am using CENTOS 5 and I am stuck where I have to repair my boot loader and all of the files are read only so I cannot fix them. How do I get around this? Thanks Chuck -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20070907/a7d2c2df/attachment.html>

Dear Concerns, I would like to share a very strange problem. I am from Pakistan/Islamabad. Last month i was on trainning from Askari Bank Limited (Juniper). Here in Askari i m running NMS--> MRTGs using CentOs 4.4. On trainning i recieved a call from collique saying "when i "su -l" NMS says "root user doesnot exist". and also MRTGs not working. well i was amazed how

As some e-mails ago, I'm trying to play beryl in my laptop. I successfully configured my xorg.conf (thanks to the comunity for the help that allowed me that). The problem: When I boot the laptop without external LCD/CRT, beryl is working fine, but when I boot it with the external, it recognice fine the external LCD and don't want to allow beryl run. What beryl says: === BEGIN === $

Hi all, I'm seeing a random issue with my procmail filters (only on email from this list) where once every so often, it will fail to filter a message. I am sorting by the to/cc email address, and this rule works on 99.9% of posts, however every now and again, I see something like this happen: From centos-bounces at centos.org Sat Jan 5 01:57:28 2008 Subject: Re: [CentOS]

Hi all, I'm in the middle of setting up a build environment for OpenWRT and it looks like the packages need flex. Looking at the CentOS repositories, it looks as though the flex package is tagged as fc6 - it also looks like there is no flex-devel package at all. Does anyone know what the go is here? Available Packages Name : flex Arch : i386 Version: 2.5.4a Release: 41.fc6 Size : 124

Hi guys, I recently turned on IMAP zlib compression for Maildir and noticed that I've started getting these errors in the maillog. Error: Cached message size larger than expected (1627 > 1548) Error: Maildir filename has wrong S value, renamed the file from /home/crc.id.au/netwiz/.System Generated.Cron Jobs/cur/1392224150.M52270P1073.mail.crc.id.au,S=1627:2,S,Z to /home/crc.

I have an old windows NT machine, that I would like to virtualize under CentOS and xen. The problem is, that the machine has an old PCI card that is used for some sensor control. I tried to google the topic, but there isn't any useful tutorial, how to do this under CentOS. What I found out is, that I need a machine that supports the Intel VT-d technology and at least XEN 3.3. Does someone on

Hi all, I''ve had a report of a host starting to give this output: Oct 7 19:36:37 kernel: INFO: rcu_sched self-detected stall on CPU { 2} (t=273561 jiffies g=17919 c=17918 q=9688) Oct 7 19:36:37 kernel: sending NMI to all CPUs: Oct 7 19:36:37 kernel: xen: vector 0x2 is not implemented Kernel is 3.11.2. Xen is 4.2.3. I''ve seen various random reports of this, but never a follow

The latest bunch of test packages are available here: http://au1.mirror.crc.id.au/repo/el8/x86_64/ Hopefully, as of a few hours ago, this set should actually install. Currently, networking won't work as they require brctl - which isn't in EL8. I've written patches for this, but they'll probably end up being part of a cleanup of everything in /etc/xen/scripts/ Problem is,

I want to put up my own blog server. What is available? I have searched the our 'standard' 3rd party repos and have not noticed anything...

> I have been looking at XenSource 3.0 solution for running virtual > servers on opteron servers. According to XenSource''s documentation, it > runs on Opterons with pacifica feature. My understanding is that we > need this feature for following reaons: > - lower virtualization overhead. Theoretically, 3-5% overhead for > guest oses when virtualized > - running guest