similar to: cbq init query

I was trying to install iproute2-2.2.4. I get an error when i run the makefile. I get a parse error in /usr/include/arpa/inet.h. Can someone help me? Thanks. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi, I have the following problem with cbq.init script. I try to limit the output traffic from all my 254 IPs to 4Kb/s, but when I start the script the ping time from one of the shaped hosts drastically increases. 0,2-0,7 milisecs without shaper and 1500-2000 milisecs with. I though it might be the low CPU power or something. I''m running on 500MHz Intel Celeron. Anyone have experienced a

If I create a cbq qdisc as a leaf of a cbq class, the bandwith rate is the same of the root cbq qdisc or the rate of the cbq class? Does exist the parameter rate on the "tc qdisc add" for cbq command? tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 10mbit avpkt 1000 cell 8 tc class add dev eth0 parent 1:0 classid 1:3 cbq bandwidth 10mbit rate 50kbit allot 1514 cell 8

Hi i need a cbq configuration that works and drops packets if the flow exceeds an amount of data.. Do u have any configuration that drops packets...? My cbq configuraion doesnt drop packets... The traffic use the correct class but seems that tha cbq is not able to control correct the flow __________________________________ Do you Yahoo!? Yahoo! Small Business - Try our new resources site!

Hi, I''m work on traffic shaping and I would like to know if it''s possible to mix differents Queueing Disciplines ?? I would like to combine the proporties of a PRIO discipline with that of a CBQ discipline. I read some documentation and I found nothing about that, can you help me ? I think to try something like that : tc qdisc add dev $DEV root handle 1: cbq … tc class add dev

Hello, it seems, that filtering on nexthdr (TCP/UDP) content, especially src or dst port, is not working. The following has no effect on 2.4.16 or older (even 2.2) kernels: # tc filter add dev eth0 parent ffff: protocol ip prio 50 u32 match tcp dst 3128 0xffff police rate 40kbit burst 10k drop flowid :1 Even if # tc filter ls dev eth0 parent ffff: filter protocol ip pref 50 u32 filter protocol

Sub:[LARTC] cbq init for one port on a subnet Hello, We use cbq.init to limit bandwidth. It works great on a per-user basis. Now I''d like to limit traffic from a netblock to the Internet on port 6699. Network is 192.168.0.160 mask 255.255.255.224 eth0 is the gateway eth1 connects the netblock in question Is this the proper syntax; DEVICE=eth0,10Mbit,1Mbit RATE=100Kbit

OK, finally I have made cbq run ! now I would like to know if it is posible to limit a range of IP to a speed. something like this : from 192.168.1.1 to 192.168.1.21 limit to 128K I don''t whant to limit each IP to 128K, what I would like to do is limit all 20 IP to have a max of 128K. Is it posible?

Hello, Does anyone know when one should use cbq versus (simpler more accurate) htb? Specifically does cbq have added functionality that may be of interest to certain applications? from htb home> Both CBQ and HTB help you to control the use of the outbound bandwidth on a given link. Both allow you to use one physical link to simulate several slower links and to send different kinds of

Hello, I'm usign Kernel 2.2.19 with ext3 0.0.7b patches. I'm also using cbq to control bandwidth. The cbq is correctly creating the classes and queueing disciplines but, whenever I call cbq stop I get a kernel panic: > Aiee, killing interrupt handler > Kernel panic: Attempted to kill idle task! > In interrupt handler - not syncing The exact line in cbq script that is

Hi, In my LAN Iam trying to make following setup: - All the traffic generated by 10.0.2.1 should go to 10.0.2.11, If the destination of this traffic is internet than it should be placed on its interface eth1. Outgoing traffic on eth1 should be shaped.For this I am using fw filters and cbq. _______ 10.0.2.1 -------> 10.0.2.11(eth0 )----| A

Hi all, I want to allocate bandwidth for ipsec interface using CBQ/tc. Suppose the conf. file is like this, DEVICE=ipsec0,10Mbit,1Mbit RATE=128Kbit WEIGHT=10Kbit PRIO=5 RULE=192.128.1.0/24 Does it work or What else options need to be taken care like ipsec packets/protocol/port # etc.? C''d anybody suggest please? regds, Srikanth. _______________________________________________ LARTC

Hi Stef and Alexey I have read some documents about CBQ algorithm from http://www.icir.org/floyd/cbq.html but still have some question about CBQ in Linux . 1. First estimator can estimate how much bandwidth already USED per class. one estimating algorithm is EWMA (exponential weighted moving average), how about Linux implemenatation about estimator? also do you have link for this algorithm? I

Hi all , does Kernel 2.4 supports CBQ and HTB by default or we have to recompile it. Regards Fahad Khan _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi there, i''m trying to shape incoming trafic on my linux box. I want it to depend on the source IP adress of the packets (in fact, i got a VPN on an ADSL link and wanted to get at least/max 64Kbit/s for the VPN) So i tried this : tc qdisc add dev ppp0 root handle 1:0 cbq bandwidth 512Kbit avpkt 1000 cell 8 tc class add dev ppp0 parent 1:0 classid 1:1 cbq bandwidth 512Kbit rate

Hi everyone, This is on a linux box, ingress (eth1) at 100Mb/s and egress (eth0) at 10Mb/s. The purpose is to test CBQ Here is my script ------------------------------------------------------------------- # Root qdisc tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 9Mbit \ avpkt 1000 cell 8 # Classes tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 9Mbit \ rate 5Mbit weight

i start reading for cbq init script but i haven''t it on my linux machine and the tutorials that a read don''t show how to install cbq on linux. sorry for my incopetence but i am in trouble now. any help will be apreciated very much thanks a lot _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, what''s the diferences between HTB and CBQ? Bye - -- ======================================== Netsite S/A - Security Officer Profissional Certificado Conectiva Linux www.kidmumu.com.br - UIN 4553082 ======================================== -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see

I find the negative attitude toward CBQ to be distracting and non-professional in the HOWTO. I''ve re-read it for the first time in about a month and comments like "This can be configured in a variety of ways, which I do not understand. Use HTB" do not encourage me about the writer. This is not a personal critique, as I can imagine this being said on a personal website,