similar to: Packet Loss !!

Hi everyone, This is on a linux box, ingress (eth1) at 100Mb/s and egress (eth0) at 10Mb/s. The purpose is to test CBQ Here is my script ------------------------------------------------------------------- # Root qdisc tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 9Mbit \ avpkt 1000 cell 8 # Classes tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 9Mbit \ rate 5Mbit weight

Hope everyone had a festive easter weekend! Is it possible to monitor how much memory iptables or kernel consumes while processing packets as they go through the firewall? The same question goes for having a large number of routes in the routing table (>700). A few reasons for asking, but the two major ones are from the following situations: 1. We provide 420 flats in a complex with

We've moved within the last two months to Asterisk 1.4.x All remote facilities are connected via highspeed (9mbit) connections (Over OpenVPN) to a central Asterisk box, acting as a voice router, that funnels all calls into our Avaya Definity G3R via PRI. When corporate employees visit the remote facilities and try to call the G3R's voice mail system(Audix), DTMF is not recognized unless

Hi, What exactly are the "tokens"? I thought each token allowed the sending of one byte, that tokens are stored in a bucket that can hold a max of "burst" tokens, and that this bucket is filled with tokens at "rate". But theory does not seem to explain the "tc -s .." output in the examples below. And I can''t figure out why or how... #tc qdisc

Hi, I try to shape my incoming traffic. I have 2MBit/s DSL bandwith and the following ruleset (on the internal interface): $INT="eth1"; $INT_NET=192.168.1.0; $MAX_IN=2Mbps; dev $INT { egress { class (<$int>) if ip_src:24 == $INT_NET; class (<$ssh>) if tcp_sport == PORT_SSH; class (<$smtp>) if tcp_sport == PORT_SMTP; class (<$http>) if

Dear list, I have the problem that child classes don''t seem to issue the parent class to borrow from their parent. This is a simplified version of my script: tc qdisc del dev $DEV root tc qdisc add dev $DEV root handle 1: htb default 10 tc class add dev $DEV parent 1: classid 1:1 htb rate 10mbit tc class add dev $DEV parent 1:1 classid 1:10 htb rate 1kbit ceil 512kbit #groups tc

How to do ensure a class not lended and not borrowed each other. I do cburst burst 0b ,but ctokens tokens go to negative! --------------------------------- Do You Yahoo!? "更多惊喜，同样精彩，NetVista A30 热卖" --0-611462377-1048485942=:33792 Content-Type: text/html; charset=gb2312 Content-Transfer-Encoding: 8bit <P>How to do ensure a class not lended and not borrowed each

Yes sure here they are: The first one that i have received 2day and does not work almost at all: #!/bin/bash ETH_IN="eth1" ETH_OUT="eth0" BANDA_TOTALA="2Mbit" # pentru neclasificati ar trebui sa fie banda minima - 1k - aici ar trebui sa ajunga trafic necunoscut, # care nu e organizat in shape-uri BANDA_NECLASIFICATI="8kbit" #Shape generale /sbin/tc

Hi... I''m working with HTB, and have a question... what happen if I create a class of "8kbit" ?? I get a log : "HTB: quantum of class .... is small. Consider r2q change" but, my r2q=1 I can''t reduce that variable... how must I procced ? Thank you! mac _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl

I'm emailing this as the customer in this case, since my carrier appears to be completely unable to solve this. A brief rundown of the problem: - We have several voice lines going through the ADIT, of course into a VoIP type of arrangement. - Voice traffic will become choppy, even drop calls completely, at random but quite often. Modem calls (which we needed unfortunately) are a joke. -

Hi i have 2 class C 80.97.103.0/24 and 81.180.12.0/24 but i dont konw how to set hashing tables for HTB tc add dev eth0 parent 1: prio 0 handle 1: protocol ip u32 divisor 256 tc add dev eth0 parent 1: prio 0 protocol ip u32 match src 80.97.103.0/24 hashkey mask 0x000000FF at 12 link 1: but i want 2 hashkey for 80.97.103.0/24 and for 81.180.12.0/24 can somebody help me ? this is a part fo my

Hi Stef, Sorry to write to you directly but my list membership is not working, I receive the archive but cant send to the list, cant delete myself because I don''t exist and can''t rejoin as they say I do exist, anyway hope you don''t mind Can you tell me what the difference between these two scripts is please. What I want to achieve is a high speed channel 1000kbit from

I''m new on this mailing list, reading it for last 4 weeks, ... Need help please... I want to implement tc rules on br0 witch is build of wlan0, wlan0wds0, wlan0wds1? I did something but it doesn''t do good job, it doesn''t give constant flow ... any idea, please if someone already have experiance... OS: Suse 9.0 myshaper

Hi! I''m trying to limit the uplink bandwidth using htb but no packets are overlimit or dropped. :-( My router config: * Linux kernel 2.4.20-pre10 (htb v3.7) with everything built as modules in QoS, iptables in use. * tc binary from htb3.6-020525.tgz * external interface eth0: Internet access, 512 kbit/s uplink speed * internal interface eth1: internal LAN, 100 Mbit/s The hosts in the

Correct me if I''m wrong, I just want to help my friend who needs a tc solution with fairness to hosts on a 512K/s DSL line, but few of them should be restricted to 64K/s I thought about htb + esfq (sfq with ip based fairness, not connection) parent class with CEIL=500Kbit (no RULE? see *1) and attached esfq to this parent class, now child class with CEIL=64Kbit and RULE=10.0.0.1

I must say that the sum of rates of child classes is higher than the rate of class 1:1(parent class); My configuration: tc qdisc add dev eth1 root handle 1: htb default 2 tc class add dev eth1 parent 1: classid 1:1 htb rate 500Kbit prio 1 quantum 2000 tc class add dev eth1 parent 1: classid 1:2 htb rate 9999Kbit prio 1 quantum 2000 Classes: tc class add dev eth1 parent 1:1 classid 1:601 htb rate

Hi, I´m shaping traffic using htb on both interfaces, I noticed that shaping download traffic is workinggreat but shaping upload traffic is not working at all (no sent packets, no dropped, no overlimits)I have eth0 facing the backbone and eth1 facing the LAN. Thanks for your help.These are the commands I run:tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1 htb default 10 r2q 5 tc

Hi all, I just recently began using HTB to try and manage bandwidth for my network. This is the script I''m using: /sbin/iptables -t mangle -A FORWARD -o eth1 -s ! 192.168.244.2 -j MARK --set-mark 53 tc qdisc add dev eth1 root handle 1: htb default 20 tc class add dev eth1 parent 1: classid 1:1 htb rate 100mbit burst 131072k quantum 59000 tc class add dev eth1 parent 1:1 classid 1:10

Hi, I have a parent class 1:1 with rate=ceil=64kbit i create 3 classes under it(1:1). class 1:2 rate=ceil=32kbit class 1:3 rate=ceil=16kbit class 1:4 rate=ceil=16kbit if 64kbit traffic is flowing from the cable all the 3 classes will get their respective shape. 1 .if only 32kbit data is flowing(for some reason). a. Then how will the traffic gets distributed.? b. Is it in first come first serve

Hi there, i''m trying to shape incoming trafic on my linux box. I want it to depend on the source IP adress of the packets (in fact, i got a VPN on an ADSL link and wanted to get at least/max 64Kbit/s for the VPN) So i tried this : tc qdisc add dev ppp0 root handle 1:0 cbq bandwidth 512Kbit avpkt 1000 cell 8 tc class add dev ppp0 parent 1:0 classid 1:1 cbq bandwidth 512Kbit rate