similar to: Newbe: restricting traffic to gateway

Hello everybody, I have a Linux router with an ethernet adapter and a ADSL device. My router has a GRE tunnel connected to a remote IP address. Using "tc" I have configured 3 different classes: 1. 290kbit rate (used for Voip Services) 2. 180kbit rate (used for GRE tunnel) 3. 80kbit rate (for generic data traffic) For each class, using "iperf", I send some data from a PC

Hi i have configured my server with cbq and gred. The problem is that the cbq doesnt drop packets. The cbq is configured at a rate of 500Kbit "qdisc cbq 4: rate 500000bit (bounded,isolated) prio no-transmit Sent 100103048 bytes 73933 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 24000 undertime 0 " The traffic that being generated is more than 5Mbit with the

hey guys i am regulating the traffic to & fro by my network through a linux gateway , its behaving strange. i regulated Downlink to 2Mbps & UPlLINK to 500Kbps. both perform well when those are done independent i.e. one at a time but when i do both from a client system ..the downlink however continues at 2mbps but the uplink falls down to 100kbps? is something wrong with my script or

Hi all, I have installed 2.4.5 kernel, Debian Potato. my tc script: #!/bin/bash tc qdisc add dev eth1 root handle 20: cbq bandwidth 10Mbit avpkt 1000 echo root tc class add dev eth1 parent 20:0 classid 20:1 cbq bandwidth 10Mbit rate \ 10Mbit allot 1514 weight 1Mbit prio 8 maxburst 20 avpkt 1000 echo class tc class add dev eth1 parent 20:1 classid 20:100 cbq bandwidth 10Mbit rate \ 5Mbit allot

Have a few generic questions about Kom-RSVP 1.) 11:00:05.175 WARNING: timer system overloaded, deviation is 30.080 sec - what timer is this referring to? System time? 2.) What is the relationship between the CBQ class created for RSVP traffic and the CBQ parameter that is in RSVP.conf? - ex. ### cbq qdisc ### tc qdisc add dev eth0 root handle 1: cbq bandwidth 10mbit avpkt 1000 mpu 64

Did anyone ever answer this one? THIS is what I am trying to do: >[LARTC] cbq+sfq and DSCP marking >Maria Joana Urbano stmaria@dei.uc.pt >Thu, 13 Feb 2003 19:29:42 +0000 > > * Previous message: [LARTC] Monitoring.... > * Next message: [LARTC] two routes 1 network card > * Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] >

Hi, I''m trying to modify the Wondershaper script so achieve the following. 1. Prioritize traffic to the few IP addresses. 2. Everyone else should get a fair amount of bandwidth The problem I am facing is when I run this script is that the bandwidth seems to get halved. I tried to apply this script to a site where the upstream and downstream were fully saturated. I immediately saw

Hi Guys, I''m asking this question again because I have exhausted resources for understanding how to get it to work. I''ve read the howto on getting traffic shaping to work (shorewall''s web site) as well as trying out wondershaper''s htb and cbq scripts. Somehow both does not seem to happen as I want it to. I''ve also read through the lartc

all: I"m just trying to create a simple rsvp session to familiarize myself with the protocol. I don''t ever get a rsvp RESV message only PATH AND PATH TEAR messages. There is a timeout but i''m not sure whats causing it exactly. Can anyone shed some light on why? All the configs and output are below. Please let me know if you need more information. Thanks. Jon Test

Hello, I''m a total tc newbie, and I''m trying to tweak the wondershaper script (http://lartc.org/wondershaper/) to get a slightly different result. Excuse me if I will not use the correct technical terms, it''s a whole new world to me :) wondershaper.htb creates 3 HTB classes; 1:10 is high prio, 1:20 is bulk (default), and 1:30 is low priority. The classes are

Hi all. Im using the following CQB shaper to shape IP addresses: DEV=eth1 (internal eth) tc qdisc del dev $DEV root tc qdisc add dev $DEV root handle 1: cbq avpkt 1000 bandwidth 100mbit tc class add dev $DEV parent 1: classid 1:1 cbq rate 256kbit allot 1500 prio 5 bounded isolated tc class add dev $DEV parent 1: classid 1:2 cbq rate 512kbit allot 1500 prio 5 bounded isolated tc filter add dev

Hi everybody, I have a network that only uses terminal services. Look at the diagram. 20 machines running WinXP <-> LinuxFW-1 <-> 1Mbit link dedicated fiber link <–> LinuxFW-2 <–> Terminal Server I’d like to give the maximum priority for bandwidth to terminal services (port 3389). I’ve changed the CBQ script from LARTC site to suite my needs, but every time I

Could someone give me some help in prioritizing uploading traffic on my ADSL connection. Currently, I have set up a Linux 2.4.12 router/firewall/NAT to allow our network of users to access the Internet. --------- eth0 ---- Linux router/firewall/NAT --- eth1 ---- Local network a.b.c.d 192.168.1.254 I can''t seem to find enough information

I am using the following commands to restrict download on an interface vm01 /sbin/tc qdisc add dev vm01 root handle 11: cbq bandwidth 100Mbit avpkt 1000 mpu 64 /sbin/tc class add dev vm01 parent 11:0 classid 11:1 cbq rate 1.5Kbit weight 1.5Kbit allot 1514 prio 1 avpkt 1000 bounded /sbin/tc filter add dev vm01 parent 11:0 protocol ip handle 4 fw flowid 11:1 When i do a qdisc show and class show,

Hi, I have a question conercing wondershaper. I''m using the Clarkconnect linux distribution for my linux router and I tried to use wondershaper. On start up of wshaper, there are no errors or any other problems but I''m not sure if it''s running correctly. Only one qdisc / one class is used and when I start an uplink ftp transfer, my ping time is growing up to 1700ms - I

I''m a tc newbie, and I think I am close to being able to use it to control one of the virtual web sites on our Gentoo Linux server. The site has it''s own IP address. I have a bit of a problem in that the way I originally configured tc, the busy site grabbed all the bandwidth, leaving none for the other (and more important) sites. Here is how I had configured it: tc

I looked and found a ''very simple'' command sequence to shape traffic to a specific host. However, I ''cribbed'' the command sequence from a online tutoral from ''somewhere''. I now have lost the example, and my altered sequence. the command I am getting an ''RTNETLINK'' Invalid argument error from is: tc qdisc add dev eth0 root

Hello Thilo, What did you find superior with CBQ-wondershaper over HTB-wondershaper? We have not been using wondershaper specifically but our simple tests so far seem to show that htb is much easier to configure for a given target shape (i.,e accurate) compared to CBQ. Torsten -----Original Message----- From: Thilo Schulz [mailto:arny@ats.s.bawue.de] Sent: Saturday, June 14, 2003 8:55 AM To:

I need to shape traffic from some IP on one LAN, but I''m in trouble. There is a linux 2.4.26 connected to the Internet (eth0) / LAN(eth1) doing NAT. I''m using VLANs in the LAN Interface, that is connected to a 3Com SuperStack II in a 802.1Q tagged port. I want to create a class that will limit the traffic at 384Kbit/s. I want to create two leaf classes that limit the traffic at

Hello all, I am testing CBQ and HTB these days and I got a lots problem which needs your help. It is a little long text :) Thank you! (All my test is based on Redhat Linux9.0) 1.Is isolated of CBQ working? I have read Mr. stef word that he never made cbq isolated work. 2. I have setup an environment to test cbq: one tcp flow which I should protect and a noisy udp flow who will eat much of the