similar to: distributions

I just installed Xandros 2.0 Desktop. I used apt-get to install iproute. I then downloaded wondershaper 1.1a from the website. I edited the script as the readme says. I went to console and started the wondershaper script...and i get the following error messages. RTNETLINK answers: Invalid Argument many times. Any ideas what is wrong? MArk _______________________________________________

Hi, I have tried unsuccesfully to limit my ftp server send speed in linux. I have an ipcop linux firewall/router with 2 nics. 1 nic (eth1) is connected to a 3mbit/384Kbit cable connection and the other (eth0) a switch. Behind it i have a suse linux box and a windows box. On the suse box i run proftpd. I need to shape my passive ftp send speed to 34KBytes because if it is maxed out at 45K

Hello! I recently upgraded my computer from Mandrake 8.2 to Mandrake 9.0. I used a very slightly modifed WonderShaper and it worked beautifully. But now when I try to run the same cbq shaping script on Mandrake 9.0 i get this output RTNETLINK answers: Invalid argument RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or

I''ve gotten wondershaper to work in my linux box, which is part of a 3 computer network that shares the same dsl connection. The linuxbox handles most bulk down and uploading, and the other 2 are mainly for surfing and such. What I need from wiondershaper is that it should perform it''s tasks with all of the traffic to the dsl modem, but do nothing with the internal traffic

Hi - I''ve been going through the LARTC how-to and have successfully used the sample scripts (and wondershaper) with my xDSL links. I''m now faced with the challenge of providing 8 users at work an effective remote access connection over a PSTN ppp connection. The critical traffic in this case relates to our stock enquiry application which is running over terminal services.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, been awhile since I''ve written. I now have a situation where I get to use traffic shaping for a client. ~ We implemented the WonderShaper script on our own firewall and experienced no problems. I made some modifications to it to add IPSec protocol packets into the 1:10 high priority class using the u32 filter. ~ So far on our

Is there a way to apply wondershaper w/ htb to a port range? I have a ftp server on port 65432 and passive ports 50000-60000. Is there a way to set a range? or do they have to be individually listed? The following doesnt seem to work: # low priority source ports NOPRIOPORTSRC=65432, 50000:60000 # low priority destination ports NOPRIOPORTDST= Mark

Hello everyone. I''ve been trying to get Qos to work here for two days now, but it REALLY doesn''t seem to work the way I want to. Here is my situation: Internet Wireless LAN Firewall DMZ Local lan As you can see, I got a Debian box in the middle as my firewall with 3 network interfaces and a wireless one. I use

I have wondershaper to limit my upload at 400kilobits (my line is 600kbps). I do a lot of torrent seeding and I dont want my pings killed when I''m uploading so I set low prority source ports as follows (by the way, I have bittornet to only use ports 6881-6910): NOPRIOPORTSRC="6881 6882 6883 6884 6885 6886 6887 6888 6889 6890 6891 6892 6893 6894 6895 6896 6897 6898 6899 6900 6901

Hello Thilo, What did you find superior with CBQ-wondershaper over HTB-wondershaper? We have not been using wondershaper specifically but our simple tests so far seem to show that htb is much easier to configure for a given target shape (i.,e accurate) compared to CBQ. Torsten -----Original Message----- From: Thilo Schulz [mailto:arny@ats.s.bawue.de] Sent: Saturday, June 14, 2003 8:55 AM To:

Hi group, first of all: I am new to this group and hope to bring in some value later. At the moment I am such a beginner that I will probably of no use to anyone and only be asking stupid questions... I am running a little private linux server with kernel 2.4.21. It serves as a gameserver, webserver and mailserver, mainly. It also does the pppoe connect via a DSL modem to my provider and the NAT

Hi I am very unclear about the wonder shaper and a bit of a novice with Unix all together I have a question for you and I hope you can answer Basically my office is getting a couple of people slowing down the network so ive been looking around and found wondershaper What I want to know is that can I rather than having low priority ports have it with high priority ports And

greetings all, i''ve searched high and low for this, but can''t seem to find an answer anywhere.. having read the docs and the wondershaper script itself, it occurred to me that the documentation promises an immediate drop in interactive app latency, specifically mentioning SSH as a big winner. however, looking through the script i can''t really tell just *how*

I''m having a network inside of a dsl modem and I''m using wondershaper on the computers to be able to surf while bulk downloading. The problem is that also the internal traffic is shaped, which means the internal network is at 200kb/s, instead of 100Mb/s. Is there a way to exclude the internal adresses from the wondershaper rules, or is there any other good way to solve this?

I have been reading lartc.org for the past few days and am a bit overwhelemed by the possibilities and configurations that are possible. I am still trying to process all of this to try and understand what I need to do in my configuration, and have tried a few things to no avail. I currently have a webserver that is completely flooding our link, so I need to find a way to deal with this quickly.

Hi, I have a question conercing wondershaper. I''m using the Clarkconnect linux distribution for my linux router and I tried to use wondershaper. On start up of wshaper, there are no errors or any other problems but I''m not sure if it''s running correctly. Only one qdisc / one class is used and when I start an uplink ftp transfer, my ping time is growing up to 1700ms - I

Hi ! I´ve been using the wonderful wondershaper from chapter 15.8 of the LARTC Howto for some time. It´s really wonderful. Actually, I use the version from http://freshmeat.net/projects/wshaper/?topic_id=87 Now I tried to put some hosts to low priority, and it doesn´t work. The traffic is splitted equally between the noprio and the other hosts. Is this because I use ip masquerading, and all

I have a linux server connecto into a 100mps LAN, i use iptables implementation of shorewall (shorewall.net) and then I used the wondershaper. When I adjusted the values below, I got a download speed for vsftp at a whooping 1187.91 KB/s but a upload speed is only a painful 27 KB/s. I dont fully understand the underpinng codes behind the wondershaper htb stuff. can someone guide me on how can i

Hi everybody! I know this discussion list isn´t just about wondershaper, but i think someone can help me. I used to have a linux box running red hat 8, as firewall on my lan. I upgraded to debian 3.0 and tried to use the same wondershaper files under debian, but, when i run wondershaper on ppp0 device, it just stops transfering. Remember: its the same files i used with success under red hat 8.

The setup is a samba server with mixed clients (samba clients and windows clients). The problem, I want the linux client to mount there home to their home share on the server. The problem is, I have followed the guide mentioned below and everything works except that the linux usernames have the format domeinnaam+username as a result of which pam_mount wants to mount