similar to: RE: LARTC digest, Vol 1 #1564 - 6 msgs

Hello everyone, I have a problem regarding gre tunneling, I have two linux box both of them has a private network and the linux A is connected to the internet via wireless radio and the other linux B is connected to the internet via lease line. Here is the setup of my two linux box Linux A eth0 = 203.189.x.1 (internet) eth1 = 192.168.1.1 (going to hub private network) Linux B eth0 = 205.198.x.1

Hi, I have the following setup. Two linux systems with two [test] external interfaces encrypted with ipsec [transport]. Two gre tunnels that pass 10.200.0.0/24 and 10.200.1.0/24 network traffic. Testing the balanced tunnels I would setup iptraf on one and ping from the other. The results would be as expected; traffic would be split between the two interfaces. Testing with an ftp transfer of

Hi. I understand that device aliases (e.g. eth2:3) are not shapeable. Does anybody know if this functionality is planned in the future? Anyway, for the time being the only option that seems to leave is to fwmark packets differently for each device alias and then shape based on that. Is it possible to set multiple marks on the packets? Alternatively, is it possible to check for a specific

Hi, I have a client connected to the ''net through 3 ISP''s. Have set up a Linux box to do routing and load sharing for the 3 connections. A fourth interface is connected to the LAN with private IP addresses. Am using iptables to SNAT traffic to the appropriate IP depending on the interface the packet gets routed onto. The setup looks something like this: Interface IP

Hi all, I have setup two multipath route tables on my system for doing failover routing, What I want it''s that if GW at route1 of the MP is dead, traffic goes by route2, for doing that I have created the multipath routes as follows: ip route add table mail.traffic proto static nexthop via ${GW1} dev eth1 weight 1 nexthop via ${GW2} dev eth1 weight 250 But it does not run as I

Hi, I have a problem with GRE tunneling. I read Advanced-Routing HOWTO about this and I did all as is written in this documentation. Even the same example is here which I need for my project. I want create (by means of GRE tunneling or IP in IP tunneling) virtual private network VPN - in first phase without IPsec in other phase with IPsec. I have two local networks distant apart with two routers.

Hello folks: I am trying to set up a router machine to handle all my network connections to the internet and my local network. I have five interfaces in total, three to ISPs (two adsl and one cable) and two interfaces to my local network one to a switch and one wireless card. I have some of the routing working acceptibly but another portion I cannot get working not matter what I''ve

Hi. I´m making an script for load balancing of two cablemodems internet connections toward my LAN. The problem is that when I try to ''equalize'' the the two internet connections with the weight=1 it doesn´t work. On the other hand, if I put 5 and 5 it works, but not at 100%, it does intermittlently, some times works and others don´t. example: ip route add default equalize\

Hi. I´m making an script for load balancing of two cablemodems internet connections toward my LAN. The problem is that when I try to ''equalize'' the the two internet connections with the weight=1 it doesn´t work. On the other hand, if I put 5 and 5 it works, but not at 100%, it does intermittlently, some times works and others don´t. example: ip route add default equalize\

Hi. I´m making an script for load balancing of two cablemodems internet connections toward my LAN. The problem is that when I try to ''equalize'' the the two internet connections with the weight=1 it doesn´t work. On the other hand, if I put 5 and 5 it works, but not at 100%, it does intermittlently, some times works and others don´t. example: ip route add default equalize\

Hi! I had two uplinks till today. We stopped one of them today, so i thought i could share my experience. (it is maybe useful for somebody) I hadn''t managed to configure it using a LARTC howto, but the Nano-howto (http://www.ssi.bg/~ja/nano.txt) and julian''s kernel patches. I had some problems with icq connections, because it is a two step connection (It is just theory). 1.

Hi all I started playing with tcng to generate my tc rules, but I have some difficulty implementing my rules... The script below generates an error: # Device eth0 tc qdisc add dev eth0 ingress beginner.tc:2: don''t know how to build meter for this The script is below, I changed the real IP numbers for XXs and YYs, since it doesn''t really matter what they are. eth0 is the

HI All , I am running a FC6 box with two internet links with load balance . Every thing is working fine expect the MSN connection that failed and reconnect every time and SSL connections . I would link to know if with the nona howto I could fix that . I have been tried with no success to redirect that connection only to one link but its look like do not work . Here my configuration :

Hi all. I''ve written a small htb script that uses U32 and FW (marked by IPTABLES) filters, but TC doesn''t seem to be using the "cls_fw.o" module !!! I''m using redhat v9.0, kernel 2.4.8-20, iproute 2.4.7-7. Here is my script: ========================================================== ##################### #Interface definition #####################

Hi, I have a little problem to setup iproute in my network It looks like this: ---- ----- ------ R1 R2 R3 ---- ----- ------ | | | | | | ------------------------------- ETH1 ETH2 ETH3 ETH0 ETH4 -------------> DMZ ------------------------------ | |

Greetings all, OK - just started playing around with traffic shaping - have imq and htb and (I think) everything else I need in the kernel and running well. My initial lab task was to protect a H.323 session over a simulated half T1 while adding bulk traffic - got that accomplished after slogging through learning tc and decided in short order that a more intuitive interface would be

Hi all, We have 2 class C networks that are connected by a Linux router with the internet. We want to apply traffic control (bandwidth control). For that we wrote the tcc script below. We have 2 problems: 1. To establish a 2 megagit download we must actually set the value to 2500kbps. Is there a possible reason for that? 2. If we enable the WAN device we get very hight ping times (they change

Hey, I''m trying to set up a Gentoo box to replace an aging BSD box here. The BSD box is running packet filter and I have it set up to take all data and route it to one of six sattelites. I have come up with the following config, but unfortunately I have no real way to test it short of switching the satellites over to the new system and prayer. The setup is: 192.168.252/22 - The LAN

Hi all, We moved our Dovecot installation first of all to have all folders and inboxes on NetApps via NFS (with indexes local) then from a physical Solaris 8 4-way UltraSparc server running Dovecot 1.2.5 (32-bit) to a virtualised Ubuntu 8.04 64-bit server with a single virtual processor (in VMWare ESX 3.5) running Dovecot 1.2.8 (64-bit). Since the change, many of our users have experienced

Hi I''m looking for a quick recipe for a newbie to control http traffic in my linux gw. My internet is overloaded already and vpn external clients are experiencing troubles (disconnecting in peak hours). Any suggestions ? Regards Guillermo Caracas/Venezuela On Thu, 2004-05-06 at 14:40, lartc-request@mailman.ds9a.nl wrote: > Send LARTC mailing list submissions to >