similar to: Bridge + leased line + tc

Hi! I have read all informations i could find, but some things are still not clear. My setup is: ---INTERNET1(eth0)-\ /- Local net1 (eth2) GW ---INTERNET2(eth1)-/ \- Local net2 (eth3) I have NAT and a working setup using HTB,SFQ, classifying with the iptables -j CLASSIFY way. I shape only the traffic coming from the internet heading to the intranet. I would like

Hi All, I''m trying to create a contended section of bandwidth using IMQ. I have the imq0 device up and running, with traffic passing through it. Firstly, I need to throttle the entire device imq0 to 2mbit/s. I would then like to add throttle rules for individual IP addresses, allowing them to pass up to 512kbit/s each, as long as imq0 has not reached its 2mbit/s. The configuration

hi stef oone more pb while shaping incoming traffic with imq .this one tc qdisc add dev imq0 root handle 1: htb default 20 tc class add dev imq0 parent 1: classid 1:1 htb rate 2mbit burst 15k tc class add dev imq0 parent 1:1 classid 1:10 htb rate 1mbit tc class add dev imq0 parent 1:1 classid 1:20 htb rate 1mbit tc qdisc add dev imq0 parent 1:10 handle 10: pfifo tc qdisc add dev imq0 parent

I have a rather unusual setup within which I'd like to run samba. At this point I have: a) 3 networks (all private IP's) b) net1, net2 are interconnected by a router. net1 has a host that also acts as a WINS server and is local master, domain master, preferred master for it's group. (linux slack7.0, samba 2.0.5) router between net1, net2 has an IP in each network and samba

Hello everybody: Here is my "network layout": ISP1 ISP2 | | | | +-----eth0---------eth1------+ | | | FC 3 box | | | +-----eth2---------eth3------+ |

Hi all, my IMQ device works OK (thanks to Andy Furniss), but now I''ve problems to attach the traffic in the qdisc''s. This is my conf: ----------------------------------------------------------------------- INET | |eth0 300Kbps ROUTER (NAT) |eth1 | LAN ----------------------------------------------------------------------- MAX=300 tc qdisc add dev imq0 root handle 1: htb

Hi I try setup imq pseudo device for shaping I''m work such script #!/bin/sh TC=/sbin/tc /sbin/modprobe imq numdevs=1 /sbin/ip link set imq0 up $TC qdisc add dev imq0 handle 1: root htb default 1 $TC class add dev imq0 parent 1: classid 1:1 htb rate 10mbit # client1 tunnel tunnel $TC class add dev imq0 parent 1: classid 1:2 htb rate 256kbit $TC filter add dev imq0 protocol ip parent 1:0

Hi all, I need my servers to decide which network they are in (i.e. dmz), and the only clue is the servers IP-address. I was trying to accomplish it like this, but it doesn''t work: case $ipaddress { "10.1.1.*": { $network = "net1" } "10.2.2.*.*": { $network = "net2" } "10.3.3.*": {

Hello, I''ve just recently started to use IMQ and I got puzzled after seeing the imq usage example on the linuximq.net site: It was something like this: tc qdisc add dev imq0 handle 1: root htb default 1 tc class add dev imq0 parent 1: classid 1:1 htb rate 1mbit tc qdisc add dev imq0 parent 1:1 handle 10: htb default 5 tc class add dev imq0 parent 10: classid 10:1 htb rate 256kbit

A CentOS 6.3 box ("host") runs several KVM virtual machines, each of which has two interfaces attached to the two bridges br1 and br2 (and each thus has two IP's; one on 192.168.0.0/22 and one on 192.168.4.0/22); net.ipv4.ip_forward on the host is 1. Simplified diagram: host +---------------+ |

Hi all and tc Gururs i have patched the IMQ and htb to kernel, but when i do egress filtering, iam not able to see any traffic and excusted the following the commands modprobe imq numdevs=1 tc qdisc add dev imq0 handle 1: root htb default 1 tc class add dev imq0 parent 1: classid 1:1 htb rate 100kbit tc qdisc add dev imq0 parent 1:1 handle 10: htb default 1 tc class add dev imq0 parent

i''m trying to limit upload and download but something is wrong(it is about NAT) i will post here my "script" maybe someone could tell me what is wrong my kernel(2.6.9) is patch with imq(linuximq.net) and my iptables(1.2.11) also #flush tc qdisc del dev eth0 root tc qdisc del dev eth1 root tc qdisc del dev imq0 root tc qdisc del dev imq1 root ifconfig imq0 down

Hi folks, I`ve a problem to use HTB and SFQ. The first script, below, to show a simple configuration, does work fine...!!! But, in the second example, does not work, becouse i put more code to clasify the traffic by protocol, http and ftp in this case. Somebody can tell me the errors? Thx, in advance.- NOTICE: IMQ device is to asociate with ETH1 my external iface. SCRIPT que funciona:

I have: tc qdisc add dev imq0 root handle 1: htb default 30 tc class add dev imq0 parent 1: classid 1:1 htb rate 512kbit ceil 512kbit tc class add dev imq0 parent 1:1 classid 1:30 htb rate 64kbit ceil 512kbit then: iptables -t mangle -A PREROUTING -i ppp0 -s 192.168.2.2 -j IMQ --todev 0 tc class add dev imq0 parent 1:1 classid 1:22 htb rate 64kbit ceil 128kbit tc filter add dev imq0 protocol

​The qemu that I am using isn't modified at all. It's the VHOST drivers that are mounted elsewhere i.e., not on default /dev/vhost-net. Here is the command that I use to launch my qemu VM: qemu-system-x86_64 -cpu host -boot order=c -hda /root/Disks/ubuntu1.qcow2 -m 1024M -smp 2 --enable-kvm -name 'client 1' -nographic -vnc :2 -net none -no-reboot -mem-path /dev/hugepages

I have a router with 3 network interfaces like in the following ASCII diagram below. All interfaces are 100mbit. There is tcp traffic being sent from net1 to net3 and from net2 to net3 and the tcp connections consume as much bandwidth as possible. There is a pfifo queue on the egress interface eth0 of the core router with a limit of 10 packets. net1 --> (eth1) router (eth0) -> net3

Hi all I''m new to this list, but not exactly to iproute stuff. I''d like to solve a specific problem with bandwidth coming from different external sources towards the internal network (also the other way around, but I figure that''s not so much a problem, since that is egress traffic shaping). The network looks like this: internet ------ ISP-------[shaping/router]

Hello, I have a serious problem with HTB which I wasn''t able to solve myself. I run a masquerading router with ppp0 as interface to the Internet. Three clients need to share a downstream of 1 MBit, which I want to divide with tc. When I see a packet being forwarded to one of these clients, I give it the appropriate unique mark: iptables -t mangle -A FORWARD -d 192.168.34.141 -j MARK

Hey Andreas, how i catch this traffic using L7 filter?, i´ve installed l7 filter now, but i don´t kwnow to use the kind of filter...!!! Can you help me? Thx.- Terraja-based 2007/4/29, lartc-request@mailman.ds9a.nl <lartc-request@mailman.ds9a.nl>: > > Send LARTC mailing list submissions to > lartc@mailman.ds9a.nl > > To subscribe or unsubscribe via the World

Hi, I have a router that got its second link. I was trying to do load balancing, but i can not get it to work properly. Just one link works at time, and is always the second in the command ip route add default table 222 proto static. Am I missing something? My script is below. I am using Debian, tried with kernel 2.6.19 (my compilation) or debian''s one (2.6.18-3-486), same results