similar to: TBF maximum bucket size

Hi, I am trying to control bandwidths of the connections by using TC with HTB. But I want to implement Leaky Bucket on this structure so as to have a straight flow. Due to being new in this area, could anyone help me how I could do this? Does TC support leaky bucket? Best regards, Fatih Duzova

Dear all, I''m reading codes in sch_sqf.c in kernel 2.4 of Linux. I find I messed up with the concept of slot, bucket and hash tables. Could anyone explain the data stucture of the hash tables a little to me. Thanks very much. Best, Franklin BTW: I can not understand why the number of entries of dep[SFQ_DEPTH*] should be twice:( _______________________________________________ LARTC

Hi Mark, This is the fix for 2.6.29(introduced by uniting the bucket journal access). Since I found no fixes-for-2.6.29 in your ocfs2.git, it is based on your original upstream-linus. In ocfs2_xattr_value_truncate, we may call b-tree codes which will extend the journal transaction. It has a potential problem that it may let the already-accessed-but-not-dirtied buffers gone. So we'd better

I got my S3 credentials defined in my production.rb, linkwise to this heroku post <https://devcenter.heroku.com/articles/paperclip-s3>. However when I''m testing it on Heroku, I get this error in my logs: "ArgumentError (missing required :bucket option)". What could be wrong? -- You received this message because you are subscribed to the Google Groups "Ruby on

Hi, i have a question about throttling a token bucket. As far as i understand, if there not enough tokens to dequeue a packet from the queue, a watchdog timer will be started and the TCQ_F_THROTTLED flag will be set. But what exactly are the consequences of setting this flag. As far as i can see, it neither prevents the enqeueing nor the deqeueing of packets in both functions of the token bucket

Hello all, First I''ll state my final goal - In case someone knows an existing piece of code that does the trick: To use Linux with two network interfaces as a router and link simulator with the following features: 1. Limited bandwidth 2. Specified propagation delay which affects each packet going out of an interface 3. Limited bucket size (send buffer) for each interface. I know how to

Hi everybody, it is my first message here. I tried to browse throughout older posts but I found no immediate answer. I need to change rate of a tbf queue while ip packets are already enqueued by it. If I go: tc qdisc replace|change|link dev eth0 root tbf rate 180kbit burst 1540 limit 15400 as results all enqueued packets seems to disappear. I can see that from a: tc -s qdisc ls dev eth0

Hi, I am a completely newbie, and have been doing intense reading for the entire last week, and have the following novice question: In section 9.2.2.2. of LARTC HOWTO, the following sample configuration given: # tc qdisc add dev ppp0 root tbf rate 220kbit latency 50ms burst 1540 Why is the burst parameter value determined to be 1540? Thanks, Todd

I''m using tc from iproute-2.6.15 with a 2.6.12 kernel. I was testing the effects of the burst parameter in a tbf qdisc. Basically, I was testing this statement from the tc-tbf(8) manpage: "If your buffer is too small, packets may be dropped because more tokens arrive per timer tick than fit in your bucket. The minimum buffer size can be calculated by dividing the rate by HZ."

Hello Please give advice in selecting suitable QoS Solution for our device. It contains one WAN port and a LAN port(4 port switch). The WAN will be connected to an ADSL modem(so we don`t know the bandwidth in advance for the WAN and depends on the ADSL connection taken). We need to give highest priority to the Voice and control the WAN bandwidth to 2Mbps. I tried with the TBF by giving 500kbps

Hi Everyone, This is a simple question but I don''t understand why the below tbf is not working as expected by throttling traffic to 5kbps If I throttle a PC''s traffic using the below when traffic exceeds 5kbps packets start getting dropped (as they should) but all traffic gets dropped. not just the bit over 5kbps. TC="tc add dev ppp0" $TC parent 8001:2 handle 2:

I am using tbf to do rate limitation. i set the rate, burst and latency parameters for tbf. but when i start passing data i notice that there is an initial burst and then the rate goes down to the configured level. is this because tbf starts with a full bucket? thanks. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection

Hi have set the following tbf tc qdisc add dev eth0 root tbf rate 0.5mbit \ burst 5kb latency 70ms peakrate 1mbit \ minburst 1540 I want to add a filter so the ip traffic pass from it.. plz help me __________________________________ Yahoo! Mail Stay connected, organized, and protected. Take the tour: http://tour.mail.yahoo.com/mailtour.html

Hi all! I just started to experiment with bandwidth management using tbf. I have the folowing problems with token understanding: 1) What unit is token? Is "1 token = 1 byte" ? If this is so, then with rate=0.5mbit and HZ=100 the bucket gets filled with 0,64kb (655 tokens) every 10ms? 2) How much tokens are used for one packet (1500)? 3) And token unrelated question. Does

Dear friends, thanks for the last advices about TBF. After reading the tbf.pdf document I got a better insight of the problems I had trying to limit the bandwith on my testbed with a high resolution. The question I have now is: Would I get an immediatly better resolution result if I change the #define HZ to 1000 for my Linux box? I have a Pentium Celeron 700 MHz, and I would like to see the tbf

Hi all, I''ve tried to look for this info in previous messages but had no luck. I''ve a 2.4.20 kernel on an Intel arch., all TC is configured and it seems to work. Anyway, I''ve had some troubles in configuring TBF via tc: 1. when I configure burst or minburst to be, say, 1500b, when I peek the configuration with "tc -s qdisc" the answer is that

Hi, Can you please explain to me the difference between rate and peakrate, in conjucture to TBF. IMHO, rate : controls the no. of pkts flowing through the pipe, and peakrate : controls the no. of tokens flowing through the bucket. A funtion(?) of peakrate and mtu is rate. If this is true, why do I need to specify both peakrate and rate? Regards, suraj. __________________________________ Do

Quick question: How do I delete an ingress tbf? [root@atlas root]# tc qdisc qdisc tbf ffff: dev eth0 rate 50Kbit burst 2999b lat 1us [root@atlas root]# tc qdisc del dev eth0 ingress RTNETLINK answers: Invalid argument _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Can I attach a SFQ qdisc after a TBF qdisc?

http://ds9a.nl/lartc/manpages I finished some more manpages, and improved others. New are tc-tbf.8, tc-sfq.8, tc-prio.8 and tc-red.8. Please check & use them. http://ds9a.nl/lartc/manpages -- http://www.PowerDNS.com Versatile DNS Software & Services Trilab The Technology People Netherlabs BV / Rent-a-Nerd.nl -