similar to: http bandwidth control

Hi all Does anyone know if i can use ethernet aliases like eth0:1 in advanced routing like multipath routing in order to avoid to have nxEthernet interfaces in my Linux box. Thansk in advanced -- Guillermo Gomez <ggomez@neotechgw.net> neotech _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:

Hi sombody know what is happen with Jim diGriz''s QoS Script Web Page ? www.digriz.org.uk/jdg-qos-script Regards _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi all, I found in http://trash.net/~kaber/imq/index.html#sources the precompiled iptables shared libs for 1.2.6 & 1.2.5, but my version is 1.2.9 (in Debian Sid) and I don''t know how to patch the .deb file. I need the -j IMQ target... ¿What can I do? Thanks!

Hi Guys, Using the 2.6.test kernel? Alex and I have done some more tests and this is the patch incase ur using jdg-qos script http://www.digriz.org.uk/jdg-qos-script/index.html#qos-2.6 Thanks K _________________________________________________________________ Winterize your home with tips from MSN House & Home. http://special.msn.com/home/warmhome.armx

I''m playing with the rather excellent QOS script from Alexander Clouter at http://digriz.org.uk/jdg-qos-script/ So far I am really impressed with it - a very impressive example of the power of linux QOS rules (has pretty much everything in it from the LARTC Howto!) However, the instructions hint that "for QoS to affect locally generated traffic in a non ethernet bridge setup

Hi, I have typical situation, local LAN with private addresses, translated via NAT to internet. I need to shape ingress traffic (from internet to local LAN) in several HTB queues accorting to destination (private not public) IP. So I need mark packets to divide them to corresponding queue. According to http://www.docum.org/stef.coene/qos/kptd/ I thing I have only one way how to do it, because

[I sent this earlier but I guess the list is subscriber-only?] I just set up wondershaper, it has a simple filter on the downstream direction to limit the bandwidth usage: tc qdisc add dev $DEV handle ffff: ingress tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip src \ 0.0.0.0/0 police rate ${DOWNLINK}kbit burst 10k drop flowid :1 This is effective but is there any way to

Hi all, my IMQ device works OK (thanks to Andy Furniss), but now I''ve problems to attach the traffic in the qdisc''s. This is my conf: ----------------------------------------------------------------------- INET | |eth0 300Kbps ROUTER (NAT) |eth1 | LAN ----------------------------------------------------------------------- MAX=300 tc qdisc add dev imq0 root handle 1: htb

Hello, Normally, in addition to such qdisc scheduler mechanisms as FIFO, PQ, WRR, WFQ, are there any more? Then, there is a confusion on scheduler in Linux enviroment: Assume there is a qdisc, such as RED as a leaf qdisc in a router, we know, if there is packet which want to enqueue the packet, the Function red_enqueue is called, but when the packet leave the queue(when the Function red_dequeue

Hello all, I have been doing a lot of archive searching over the last week reading posts on IMQ and it''s apparent stability / instability. I have seen a number of posts about it not being maintained as well. Can anyone talk to me about IMQ''s stability in a heavy throughput environment (20 Mbps) and what was causing IMQ to fail if you know. Thanks, Mike

Hi list... I work for a school in the netherlands with a 2mbit Internet uplink and about 3800 eager student who want to play games on the Internet using one of our 800 workstations. Problem was that those game playing students are concentrated in 2 of our 6 physical locations... and they consumed the bandwidth which the other location would like to use for educational purposes. The thing we did

Hi, I can''t get traffic shaping working. This is my situation: -------- ------ Net1 ----- |router| -------------------- | TC | ----------- Net2 -------- leased line ------ eth1 eth0 We use the leased line for normal traffic but also for synchronisation between 2 servers. The leased line is 2mbit. The synchronisation

Hi I have built a custom TMB Mandrake kernel (2.4.22) with IMQ and ESFQ support. I statically compiled both (mistake?) ESFQ is sorted and working fine (I have succesfully patched IPROUTE2). I have got to the stage where I can see the IMQ device as UP with ifconfig. I can use TC to add QDISCs to the IMQ device. However I just cannot sort out IPTABLES to actually redirect packets to the IMQ

Hello, I''m wondering which of these filters is the best method for filtering ACK packages to achieve lowest delay possible on a dsl-link. This one ist from the wondershaper from the lartc-site: /sbin/tc filter add dev $EXTIF parent 1:0 protocol ip prio 0 u32 \   match ip protocol 6 0xff \   match u8 0x05 0x0f at 0 \   match u16 0x0000 0xffc0 at 2 \   flowid 1:10 Thats a suggestion

Hi there, I''ve got the following problem on my hand..... I''m a sysop for a school in the netherlands. We have a network with 5 different schools (and 1 administration). Each of those have their own ip range in the private network (10.4.0.0 10.5.0.0 and so on). For all these schools we have an internet uplink of 2mbit. And this bandwidth should be shared as fairly as possible.

Hey folks, I stumbled across the Mastershaper project ( http://www.mastershaper.org/ ) but I have a little problem: I wanted to shape the traffic coming from the router itself aswell as coming from the LAN behind the router, for that task I need IMQ, but with IMQ iptables-(layer7)-matching is not possible. Now I''ve talked with the programmer and he said the following: >The problem is

Dear list: I have a problem I cannot handle yet, and need to solve it as soon as possible. Would be very greatful with anybody who can help me. I have a 512/512 link to internet, that I want to share between several computers. I have eth0, with a public IP address, conected to Internet, and also, eth1, with a private IP address, for network with the surfing computers. I have a main class with

Hi, I have a default class for my un-marked traffic (prio 5) and a prio 0 class for the important stuff, but I do not understand why my download traffic is duplicated in both. It work fine for my upload traffic (same setting except the red class but I have the same result if I create an esfq instead). Any comments/information will be appreciated. Below my config : tc commands from my scirpt :

please, help, i have build vpn server (suse 9 + poptop), i have managed to implement tc htb in ip-up script, but every client has own ppp interface (ppp0, ppp1, ppp2...), and my idea is to share available bandwidth, not to limit connection, how to build root tc rule, when I have more then one interface?... please any one width experiance regards _______________________________________________