similar to: ata problem

Hi all, I'm sure this eventually will be resolved with a BIOS or kernel update, but in case someone experiences this on this or a similar motherboard, I thought I'd post a problem-and-workaround report. Platform CentOS5, x86_64 kernel-2.6.18-53.1.21.el5 Motherboard Asus M3a78-EMH HDMI SATA-controller configured as AHCI Experienced symptom; Periodic, ~20s lockups/freezes, several a

Hello, I was wondering if anyone could point me in the right direction? I am receiving these in my log file and do not know what they mean or what to look for; Mar 8 04:03:56 bms kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Mar 8 04:03:56 bms kernel: ata3.00: cmd 25/00:28:42:d3:37/00:00:13:00:00/e0 tag 0 cdb 0x0 data 20480 in Mar 8 04:03:56 bms kernel: res

> > > > > [root at darkness ~]# ls -al /dev/sr* > > ls: cannot access /dev/sr*: No such file or directory > > [root at darkness ~]# ls /dev/s* > > /dev/sda /dev/sda3 /dev/sdb1 /dev/sg0 /dev/stderr > > /dev/sda1 /dev/sda4 /dev/sdb2 /dev/sg1 /dev/stdin > > /dev/sda2 /dev/sdb /dev/sdb3 /dev/snapshot /dev/stdout > > [root at

> > [ 2.183682] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 2.183825] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 7.183893] ata3.00: qc timeout (cmd 0xec) > [ 7.183908] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4) > [ 7.183960] ata4.00: qc timeout (cmd 0xa1) > [ 7.183974] ata4.00: failed to IDENTIFY (I/O error,

Hallo, "never change a running system" ... For some months I run btrfs unter kernel 3.2.5 and 3.2.9, without problems. Yesterday I compiled kernel 3.3.4, and this morning I started the machine with this kernel. There may be some ugly problems. Copying something into the btrfs "directory" worked well for some files, and then I got error messages (I''ve not

Hi, I''ve got similar problem - after HW failure - two of three disks became unavailable and now I''m unable to btrfsck. Btrfs lays on /dev/sdb1,/dev/sdc1,/dev/sdd1 - sdc+sdd became unavailable Here is kernel log: ============================================ Mar  9 23:56:28 ftp2 kernel: [121492.593338] ata7.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen Mar  9

On my machine I have SATA0: HD SATA1: HD these two drives are set as RAID1 SATA2: HD extra SATA3: DVD SATA4: external USB disk Snip from dmesg shows the ATAPI device being detected. ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe400 irq 10 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe408 irq 10 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: PIONEER BD-ROM

Hello, I just upgraded from Xen-3.3.1 to Xen-4.0.0. System is Gentoo, Hardware is DualCore AMD Athlon, 8GB RAM. The kernel was upgraded from OpenSUSE 2.6.27.29-0.1.1 to Gentoo-2.6.32-xen- r1. The first boot failed with an OOM error during kernel/initrd load, so I adjusted the dom0_mem option and had to increase it''s avalue from 256M to at least 400M until the dom0 could boot. At all

Not sure if anyone has seen this probably not but thought that I would throw it out there, running centos 5.4 on a tyan s4985 and I wanted to add a hot swap drive cage to it so I added a supermicro cage and bought some drives, not wanting raid but something for storage and rsync backups. Well I decided to buy some of the newer samsung F3 hd502hj 500Gig hard drives, supposedly good performance for

Ok, got a quickie. I have an eSATA drive, a 750GB Seagate in an eSATA external enclosure, and a Silicon Image sil3132 ExpressCard controller for my laptop. The disk and controller work great in CentOS 5 (or F7, for that matter), if I specifically mount it. This is not how I want to have to use this drive, however. I want to hotplug it; that is, plug the controller into the laptop, and then

Hi List, Any ideas what is wrong with controller? It is running latest 5.x series of centos and driver spills out following warnings at random times: mptbase: ioc0: WARNING - IOC is in FAULT state (1600h)!!! mptbase: ioc0: WARNING - Issuing HardReset from mpt_fault_reset_work!! mptbase: ioc0: Initiating recovery mptbase: ioc0: WARNING - IOC is in FAULT state!!! mptbase: ioc0: WARNING -

Hi folks. I'm posting this to both the Fedora as well as the CentOS lists in hopes that somewhere, someone can help me figure out what's going on. I have a dual Xeon 3GHz server that's performing rather slow when it comes to disk activities. The machine is configured with a single 160 GiB OS drive (with CentOS 5.0) and 4x500 GiB drives setup in a RAID-5 configuration.

Hi All, I am fairly certain that this disk is failing in my server, and I am replacing it straight away anyway. However, I'd appreciate the views of the list just to be sure as I value your opinion(s). I got these errors, once only so far, in /var/log/messages. This disk has / on it. Oct 5 08:34:47 server1 kernel: ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0 Oct 5 08:34:47

Hello, I have experienced a dom0 crash where the system became unreachable via the network and the console was unresponsive. I would appreciate help interpretting the logs and any configuration change suggestions. It is a stock Debian Lenny dom0 running xen 3.2.1 with kernel 2.6.26-2-xen-amd64 and an AMD Athlon IIx4 with 4 GB of RAM. It is running 4 VMs. One VM has two PCI NICs being

On my C5 machine (a Dell XPS420) I have a 500Gb disk on the internal SATA controller. I also have a SiI3132 dual-port multi-device eSATA card. This is connected to an external SATA array of disks. Now occasionally I see something like this in my logs ata7.01: exception Emask 0x0 SAct 0x0 SErr 0x0 a ction 0x0 ata7.01: irq_stat 0x00060002, device error via D 2H FIS ata7.01: cmd

I just installed CentOS 5 on a computer. On boot, I get the a error message, related to 2 SATA disks. These errors did NOT appear on version 4.4 with the EXACT same hardware. Could someone please tell me what these error are and if there is some known way to prevent them? My configuration: - 2 Hitachi SATA 120 GB Harddisks - Intel P4 3GHz - Tyan Tomcat i875p motherboard - 1 GB ECC RAM - 2

I just installed CentOS 5 on a computer. On boot, I get the a error message, related to 2 SATA disks. These errors did NOT appear on version 4.4 with the EXACT same hardware. Despite the error messages, the disks seem to be working with no problems. Could someone please tell me what these error are and if there is some known way to prevent them? I searched the Net for these errors and they seem

Hi, I have some errors in dmesg: [ 542.255788] ata1.00: exception Emask 0x0 SAct 0xffffff SErr 0x0 action 0x0 [ 542.255797] ata1.00: irq_stat 0x40000008 [ 542.255805] ata1.00: failed command: READ FPDMA QUEUED [ 542.255821] ata1.00: cmd 60/00:00:1a:b7:7a/04:00:1d:00:00/40 tag 0 ncq 524288 in [ 542.255824] res 41/40:00:a0:b7:7a/00:00:1d:00:00/40 Emask 0x409 (media error) <F> [

Hi, My xen guest stopped booting suddenly and giving me the below error message. Any idea what is going wrong here? DOM 0 boots OK though. ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 ata5.00: irq_stat 0x40000008 ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/00:00:cd:ee:36/02:00:09:00:00/40 tag 0 ncq 262144 in res 51/40:72:5b:f0:36/d9:00:09:00:00/40 Emask

Hi, My xen guest stopped booting suddenly and giving me the below error message. Any idea what is going wrong here? DOM 0 boots OK though. ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 ata5.00: irq_stat 0x40000008 ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/00:00:cd:ee:36/02:00:09:00:00/40 tag 0 ncq 262144 in res 51/40:72:5b:f0:36/d9:00:09:00:00/40 Emask