similar to: RV: LATENCY PROBLEMS

I don't see the issue here. It would be helpful if people would report their sessionInfo() when reporting whether or not they see this issue. Mine is > sessionInfo() R version 3.4.3 (2017-11-30) Platform: x86_64-pc-linux-gnu (64-bit) Running under: Arch Linux Matrix products: default BLAS/LAPACK: /usr/lib/libopenblas_haswellp-r0.2.20.so locale: [1] LC_CTYPE=en_US.UTF-8

Hello, I have looked on https://www.r-project.org/bugs.html , but it seems that this is the only way to do it. The issue is that the precision used by write.csv is on consistant for big files. See the following code: First I create a large dataframe filled with random uniform values. Then I write it to .csv and print out the first and last lines. df = data.frame(replicate(100, runif(1000000,

Hi, I was wondering how it was possible to access the actual cluster exemplars from the APResult class. Currently it only spits it out onto the terminal if you type the object but there is no other way to see which one is the examplar. Would appreciate any help. Thanks, Sachin [[alternative HTML version deleted]]

To my surprise, I can confirm on Windows 10 using R 3.4.3 . As tail is not recognized by Windows cmd, I replaced with: system('powershell -nologo "& "Get-Content -Path temp.csv -Tail 1') The last line shows only 7 digits after the decimal, whereas the first have 15 digits after the decimal. I agree with Dirk though, 1.6Gb csv files are not the best way to work with

Hi - a newbie question, if someone can please help.... I want to change X1, X2,,.....to X.1 X.2 etc in the names below. I am using the Principal Component Regression function (pcr) and it seems to want it this way > datap3.pcr <- pcr(water ~ X, 10, data = datap3, Validation ="cv") Error in model.frame.default(formula = water ~ X, data = datap3) : invalid type (list) for

Hello again, I may have a common problem to solve but it seems it is harder than I thought... I have 2 internet providers (each one having a different gateway). Behind the router there are around 100 clients that are SNAT-ed. I want some clients to be SNAT-ed to the first provider, while the others to the second one. The following lines should work: iptables -t nat -A POSTROUTING -s

Hello everyone, I am trying to fit the following model All X. variables are continuous, while the conditions are categoricals. model <- lm(X2

Hi I using ipp2p to block p2p traffic. How to enable to use p2p to me host in my net ? I using this setup: iptables -A FORWARD -m ipp2p --ipp2p --bit --apple --winmx --soul --ares -j DROP This setup: iptables -A FORWARD -m ipp2p --ipp2p --bit --apple --winmx --soul --ares -d ! mynet -j DROP iptables -A FORWARD -m ipp2p --ipp2p --bit --apple --winmx --soul --ares -s ! mynet -j DROP not

Hallo, All, I have a question about changing the height or scale of the y axis. When I use following two R codes, I can get two plots. Please look at the y axes, the number of indices (x1, x2, ?) on the y axis in the first plot is smaller than that in the second plot, and hence the space between any two indices in the first plot is wider than that in the second plot. As the number of indices

Greetings, I''ve searched, found ftwall, and some other commercial solutions, but am wondering if anyone on this list has any solutions using a linux firewall to block p2p traffic, more specifically Kazaa. Walter Wickersham _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi, I''ve a linux as router nat + firewall (POLICY DROP for INPUT OUTPUT and FORWARD) but, I''ve put next rules for p2p software on FORWARD chain [... snip ... ] iptables -F FORWARD iptables -P FORWARD DROP iptables -A FORWARD -p tcp --dport 80 -j ACCEPT iptables -A FORWARD -p tcp --dport 25 -j ACCEPT [... snip ... ] iptables -A FORWARD -m ipp2p --ipp2p -j ACCEPT iptables -A

Hi all !!! I have a firewall bridge (not router) with two nics that filter p2p with ipp2p. All works fine but now I need to add a third nic to route all p2p traffic through this nic. It is that possible with a bridge ? Later (with other server) connect to this nic I do loading balancing with two adsl lines to route all p2p traffic. Any hint ? Any howto ? Thanks in advance. roberto --

Hi.... I''m trying to setup a LAN router with P2P filter but the problem is that can''t "catch" Ares. There is a way to DROP "ares" p2p packets ? I''ve tried with last "ipp2p" snapshot without sucess... I''ve Kernel 2.4.28 iptables 1.3.0 Various Patches from patch-o-matic-ng-20040621 iproute2-ss020116 IMQ Patch Esfq Patch

After varying degrees of success with p2p detection modules, I would like to write the following rules using iptables to reliably identify p2p traffic: 1. If a host on the network has 5 or more simutaneous tcp connections to ports above 1024, mark all connections to ports 1024 and above as 60. 2. If a host has received (or sent) UDP packets from 5 different hosts'' ports above 1024 in a

re I would like to do some firewalling and p2p shaping/limiting on one of the vlans in my network and I was thinking of using linux box as transparent bridged firewall/limiter. For this I''m planning to use AMD64 2.2Ghz box with 2 1gbit NIC (Broadcom 5721), that will be bridged. The box must be totally transparent and unseen in the network, as well as it should have much influence on

Hey, one more question for ipp2p iptables -t mangle -A DSL-IN -p tcp -m ipp2p --ipp2p -j CONNMARK --restore-mark iptables -t mangle -A DSL-IN -p tcp -m mark ! --mark 0 -j ACCEPT iptables -t mangle -A DSL-IN -p tcp -m ipp2p --ipp2p -j MARK --set-mark 7 iptables -t mangle -A DSL-IN -p tcp -m ipp2p --ipp2p -j CONNMARK --save-mark iptables -t mangle -A DSL-IN -p udp -m ipp2p --ipp2p -j MARK

Hello, I guess a few of you know about the iptables-p2p project at the http://sourceforge.net/projects/iptables-p2p site. This suite has an excellent filter of which I use today and its running very smoothly. The main reason why I use this is because I desperately need to block torrents. IPP2P does not do this at this time (it seems to me in the doc at least). Is it maybe some way we could merge

Hi I believe that whole question is in topic. Is there any way to recognize ( and then shape ) p2p traffic which is encrypted? Modern p2p clients have this ability moreover some of them have this enabled by default. Now I''m using ipp2p for iptables but as I know this doesn''t recognize encrypted traffic. Thanks in advance. Pozdrawiam Szymon Turkiewicz

Hello, Is there a way to route p2p traffic on a separate ISP connection, just as you would choose a separate connection for http traffic? I tried all sorts of setups based on: http://www.braindump.dk/en/wiki/?wikipage=PolicyRouting but with no luck. Please help :) (ipp2p is up and running) _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl

Im getting into tc. How can I control P2P (peer to peer) traffic??? which filters??? any ideas??? Hugonik