similar to: Re: [Fwd: Re: Simple HTB setup with tcng]

Hello all, I am trying to set up a simple htb based system, where packets with source ip 10.0.0.1 should have their own class. I plan to use tcng to set it up easier. Is there something wrong in my tcng file ? ~/tcng$ cat htb /* */ #include "fields.tc" #include "ports.tc" dev eth0 { htb ( ) { class ( rate 600kbps, ceil 600kbps ) {

Hi I''m looking for a quick recipe for a newbie to control http traffic in my linux gw. My internet is overloaded already and vpn external clients are experiencing troubles (disconnecting in peak hours). Any suggestions ? Regards Guillermo Caracas/Venezuela On Thu, 2004-05-06 at 14:40, lartc-request@mailman.ds9a.nl wrote: > Send LARTC mailing list submissions to >

hi all, i''m having problems building a module from my tcng configuration file. could someone verify the syntax for building a kernel module? i did it as shown below ... module gets built but i cannot load it. thanks charles ps -- sorry, don''t know c++ :-) [root]# cat /etc/tcng.test #define LAN "eth0" #define LAN_INGRESS 750000 #define LAN_EGRESS 750000 dev

Hi all, Can someone please help with a tcng setup? I have played with tc and tcng in the past, and now would like to get some serious rules in place. However, I have a difficulty in setting them up. My setup is as follows: One machine working as a firewall: eth0 is the interface connected to a 512K DSL line eth1 is connected to a LAN eth2 is connected to another LAN, a bit like a DMZ eth1 and

Newbie here... tcng version 10b I''m just learning about htb and using tcng. I am trying to make the example in Martin A. Brown''s Traffic Control with tcng and HTB HOWTO v0.5 example 2 /* * Simply commented example of a tcng traffic control file. * * Martin A. Brown <mabrown@securepipe.com> * * Example: Using class selection path. * * (If you are reading the

My previous message (http://mailman.ds9a.nl/pipermail/lartc/2004q2/012285.html) didn''t generate any replies, so I thought I''d try posting what I''ve done trying to solve my own problem, in hopes that someone will take pity and show me if/where I''m going wrong. Just to recap, I''m trying to accomplish this on my server, which streams RealAudio files

Hi, I try to shape my incoming traffic. I have 2MBit/s DSL bandwith and the following ruleset (on the internal interface): $INT="eth1"; $INT_NET=192.168.1.0; $MAX_IN=2Mbps; dev $INT { egress { class (<$int>) if ip_src:24 == $INT_NET; class (<$ssh>) if tcp_sport == PORT_SSH; class (<$smtp>) if tcp_sport == PORT_SMTP; class (<$http>) if

Hi, I am new to traffic control in linux. However, i have able to grab many new knowledge in recent days. I find tcng somewhat easy to use (although lack proper doc. of its usage). I want to control traffic of several IP Addresses connected to my LANSIDE. What I want is , i want to separate certain bandwidth to all my clients. dev "etho" { htb() { class ( rate 400kbps, ceil

Hi I''m completely stuck with the tcng language - I assume there must be some way to arrange queues hierachically like eth1 | TBF | PRIO / \ class class but my attempt (below) produces a "inferno.tc:8: qdisc "tbf" has no classes near "prio"" when run through tcc. dev eth1 { egress { tbf (rate 128kbps, burst 64kb,

Hey all, i have a class. class ( <$call1> ) if ip_dst == 10.100.1.6 && tcp_dport == 22 if ip_src == 10.100.1.4 && tcp_sport == 22 ; Now when i apply this traffic TO 6 on port 22 is indeed limited to the speed i specify BUT it doesn''t seem to take the src into account at all. If i change the src to anything, even an address that

Hi all, I have read the larc howto and I need to apply a traffic shaper with this configuration: router / two interface etho and eth1 lan lan is on eth1 and on eth0 I''ve the dsl connection (1.2 Mbit / 256 kbit) I need to limit the bandwith towards lan and I''ve thought at HTB and tcng. I write the script belove. I want limit the p2p and ftp (ssh and irc) connection at 15

Greetings all, OK - just started playing around with traffic shaping - have imq and htb and (I think) everything else I need in the kernel and running well. My initial lab task was to protect a H.323 session over a simulated half T1 while adding bulk traffic - got that accomplished after slogging through learning tc and decided in short order that a more intuitive interface would be

I''d like to set up a filter based on a port range. I tried something like class( <$test> ) if tcp_sport > 2001 && tcp_sport < 2015 ; But it seems to ''hang'' with this in there.. Is this the best/right way to go about this? if not, what is the best way? Thanks _______________________________________________ LARTC mailing list /

hi, i´am new in tcc (tcng). i try to define my qos for VoIP-Services. For this i wantto define a class for a port range 10000 till 15000. how is the right way? this down works: class (<$voip>) if tcp_sport => 10000 || tcp_sport <= 10000 ; are there any examples of real installations - maybe including VoIP, HTTP and P2P services? regards thorsten gehrig

Hi all I started playing with tcng to generate my tc rules, but I have some difficulty implementing my rules... The script below generates an error: # Device eth0 tc qdisc add dev eth0 ingress beginner.tc:2: don''t know how to build meter for this The script is below, I changed the real IP numbers for XXs and YYs, since it doesn''t really matter what they are. eth0 is the

Hi, I have several users on the lanside each allocated separate IP addresses. I need to allocate th traffic to each IP addresses certain portion of total uplink. Say, 192.168.0.2 rate 128kbps, ceil 128kbps. 192.168.0.3 rate 65kbps, ceil 128kbps 129.168.0.4 rate 64kbps, ceil 64kbps. and so on.... Also, for each user i would like to prioritize the traffic within the allocated bandwidth. say for

Hi, We are using kernel 2.4.24, tcng version 10b. I''m trying to do some policing in the ingress queue of the internet device. Until now we had configured some filters dividing traffic into queues, and on these queues the Double Leaky bucket meter was applied. The idea is to have a minimum of bandwidth assigned per class (the cir values) and a maximum (pir values), just as with the

... is on SourceForge: http://tcng.sourceforge.net/dist/tcng-10a.tar.gz md5sum 3f58447fdf393cbe3c584d80089806dc See also http://tcng.sourceforge.net/ This release changes a bunch of things, hence the jump in the version number: - the name of the traffic control compiler has changed from "tcc" to "tcng". This has become necessary because of a name conflicy with the

hi below is sysvinit script for handling tcng-script .... please excuse my bad bash skils, correct me where i''m doing stupid things :") what is left... many things, if i have time i will implement them too : - start [devices] - and then correct handling of service lock files i.e. per device lock file - stats blah ... - all ideas are welcome !! - test or some such, i mean the

Hi all, We have 2 class C networks that are connected by a Linux router with the internet. We want to apply traffic control (bandwidth control). For that we wrote the tcc script below. We have 2 problems: 1. To establish a 2 megagit download we must actually set the value to 2500kbps. Is there a possible reason for that? 2. If we enable the WAN device we get very hight ping times (they change