similar to: Simple HTB setup with tcng

Thank you for your help. It generates this script : tc qdisc add dev eth0 handle 1:0 root htb default 2 tc class add dev eth0 parent 1:0 classid 1:1 htb rate 75000bps ceil \ 75000bps tc class add dev eth0 parent 1:0 classid 1:2 htb rate 125000bps tc filter add dev eth0 parent 1:0 protocol all prio 1 u32 match u32 \ 0xa000001 0xffffffff at 12 classid 1:1 But I thought it was necessary to

My previous message (http://mailman.ds9a.nl/pipermail/lartc/2004q2/012285.html) didn''t generate any replies, so I thought I''d try posting what I''ve done trying to solve my own problem, in hopes that someone will take pity and show me if/where I''m going wrong. Just to recap, I''m trying to accomplish this on my server, which streams RealAudio files

Hi all, Can someone please help with a tcng setup? I have played with tc and tcng in the past, and now would like to get some serious rules in place. However, I have a difficulty in setting them up. My setup is as follows: One machine working as a firewall: eth0 is the interface connected to a 512K DSL line eth1 is connected to a LAN eth2 is connected to another LAN, a bit like a DMZ eth1 and

Hi, I have several users on the lanside each allocated separate IP addresses. I need to allocate th traffic to each IP addresses certain portion of total uplink. Say, 192.168.0.2 rate 128kbps, ceil 128kbps. 192.168.0.3 rate 65kbps, ceil 128kbps 129.168.0.4 rate 64kbps, ceil 64kbps. and so on.... Also, for each user i would like to prioritize the traffic within the allocated bandwidth. say for

Hey all, i have a class. class ( <$call1> ) if ip_dst == 10.100.1.6 && tcp_dport == 22 if ip_src == 10.100.1.4 && tcp_sport == 22 ; Now when i apply this traffic TO 6 on port 22 is indeed limited to the speed i specify BUT it doesn''t seem to take the src into account at all. If i change the src to anything, even an address that

Hi I''m looking for a quick recipe for a newbie to control http traffic in my linux gw. My internet is overloaded already and vpn external clients are experiencing troubles (disconnecting in peak hours). Any suggestions ? Regards Guillermo Caracas/Venezuela On Thu, 2004-05-06 at 14:40, lartc-request@mailman.ds9a.nl wrote: > Send LARTC mailing list submissions to >

Hi all, I have read the larc howto and I need to apply a traffic shaper with this configuration: router / two interface etho and eth1 lan lan is on eth1 and on eth0 I''ve the dsl connection (1.2 Mbit / 256 kbit) I need to limit the bandwith towards lan and I''ve thought at HTB and tcng. I write the script belove. I want limit the p2p and ftp (ssh and irc) connection at 15

How can i put a port range in a tcng or tc configuration > > Does somebody know??? > > It´s important, cause i need to regulate the bandwidth from the TCP port > 1054 until TCP port 1200, how can i do that???????? > > _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Hi I''m completely stuck with the tcng language - I assume there must be some way to arrange queues hierachically like eth1 | TBF | PRIO / \ class class but my attempt (below) produces a "inferno.tc:8: qdisc "tbf" has no classes near "prio"" when run through tcc. dev eth1 { egress { tbf (rate 128kbps, burst 64kb,

hi, i´am new in tcc (tcng). i try to define my qos for VoIP-Services. For this i wantto define a class for a port range 10000 till 15000. how is the right way? this down works: class (<$voip>) if tcp_sport => 10000 || tcp_sport <= 10000 ; are there any examples of real installations - maybe including VoIP, HTTP and P2P services? regards thorsten gehrig

Hi all, I have a little problem with my home-made slackware linux server. Here is the scenario: 1. I have a local wifi network 2. my server do masquerading and exit in internet via a PPPoE connection Goals: 1. not use SQUID 2. shaping the traffic with classes 3. emule connection must have minimum priority and a band-limit of 10KBytes/s in uplink (server--->internet) Any idea? Thx, Diego --

Newbie here... tcng version 10b I''m just learning about htb and using tcng. I am trying to make the example in Martin A. Brown''s Traffic Control with tcng and HTB HOWTO v0.5 example 2 /* * Simply commented example of a tcng traffic control file. * * Martin A. Brown <mabrown@securepipe.com> * * Example: Using class selection path. * * (If you are reading the

Does anybody know how to you use tcng with packet marking. I''m masquerading my connection so to shape outbound traffic I need to mark packets with iptables. But how to you make tcng to recognize marked packets? Thanks for your help.

hi all, i''m having problems building a module from my tcng configuration file. could someone verify the syntax for building a kernel module? i did it as shown below ... module gets built but i cannot load it. thanks charles ps -- sorry, don''t know c++ :-) [root]# cat /etc/tcng.test #define LAN "eth0" #define LAN_INGRESS 750000 #define LAN_EGRESS 750000 dev

I can''t seem to match packets less than 512 bytes: class( <$bulk> ) if tcp_dport == 81 && !( ip_len & 0xfe00 ) ; or if tcp_dport == 81 && ip_len < 512 Both rules match any packet I send to port 81, even when the total IP length is much greater than 512 bytes: class htb 2:4 parent 2:1 leaf 5: prio 1 rate 8000bps ceil 24000bps burst 6Kb cburst 1839b Sent

Hi all I started playing with tcng to generate my tc rules, but I have some difficulty implementing my rules... The script below generates an error: # Device eth0 tc qdisc add dev eth0 ingress beginner.tc:2: don''t know how to build meter for this The script is below, I changed the real IP numbers for XXs and YYs, since it doesn''t really matter what they are. eth0 is the

Hi, I try to shape my incoming traffic. I have 2MBit/s DSL bandwith and the following ruleset (on the internal interface): $INT="eth1"; $INT_NET=192.168.1.0; $MAX_IN=2Mbps; dev $INT { egress { class (<$int>) if ip_src:24 == $INT_NET; class (<$ssh>) if tcp_sport == PORT_SSH; class (<$smtp>) if tcp_sport == PORT_SMTP; class (<$http>) if

Greetings all, OK - just started playing around with traffic shaping - have imq and htb and (I think) everything else I need in the kernel and running well. My initial lab task was to protect a H.323 session over a simulated half T1 while adding bulk traffic - got that accomplished after slogging through learning tc and decided in short order that a more intuitive interface would be

Hi all, We have 2 class C networks that are connected by a Linux router with the internet. We want to apply traffic control (bandwidth control). For that we wrote the tcc script below. We have 2 problems: 1. To establish a 2 megagit download we must actually set the value to 2500kbps. Is there a possible reason for that? 2. If we enable the WAN device we get very hight ping times (they change

Hi all, It is my understanding that with HTB, the rate and the ceiling are divided over the elements of the class. E.g. using a rate of 100 kb and a ceiling of 2000 kb for a class with 10 elements on a 100Mb NIC, the effect of the ceiling will be that if all elements are generating their maximimum possible trafic they will be effectively limited to ~ ceiling / number of elements, in this case