similar to: Real IP behind SNAT

Been running this for quite a while and noticed that have intermittent problems getting out. Find that if I ping the same site from 2 computers it may work on one and fail on the other. Also was surprised that some time they are going out different interfaces at the same time. Seems to work all the time from the firewall. Running 2.6.10 kernel with the multipath routing patches on a debian

Hi, I configured a router box to use 2 providers, as described in the HOWTO. (Apendix 1) I want to use both links to reach a single smtp server. As I read in the kptd and in some old messages of this list, doing a SNAT in the postrouting chain comes _after_ the routing desision. So I guess the following lines I''m trying to use are wrong. (See Apendix 1) What can I do to have multiple

Hi, I have three linux machines, and I want to let one of them forward packets betwen the other two. The forwarding node has two ethernet cards, connecting the two two machines respectively. However, when I ping between the two end points, the forwarding node can receive the ping requests at its eth0, but it never forwards them to its eth1. So is the reverse direction. The forwarding node is

Hi. Has anybody experienced problems with HTB and latency? The case is: I''m allocating traffic for HTTP traffic. It seems more responsive without using HTB. Regards, Nelson.- -- Homepage : http://geocities.com/arhuaco The first principle is that you must not fool yourself and you are the easiest person to fool. -- Richard Feynman.

Hi, I thought sending email went out on port 25? When I look with ethereal, outbound email transfers were on port 58020. I assume it''s choosing a random port for transfer? If so how do I tag it with iptables mark? I was hoping it was as simple as tagging port 25. Thanks, Mark

Second test after big upgrade.. -- http://www.PowerDNS.com Open source, database driven DNS Software http://netherlabs.nl Open and Closed source services

I have two ISP connections, and am having some issues. I can connect to any services on the firewall, like the smtp gateway, but anything on the internal server only works from one connection. The lartc guide has a good example for what to do for services on the box, but leaves it open for how to handle services on an internal host. I''ve tried using iptables to mark the packets

Hi. I am trying to shape my upstream bandwidth, mostly per port. and I am having some problems getting things to work the way I want them to. before I throw my configuration at you guys ;), I`d like to debug it by myself - but I was not able to find a tool that allow me to monitor current bandwidth usage per port (and preferably even per port+ip). I want to know what is the current bandwidth

Hi, I've got a small network at home with a topology as follows: -- Cable Modem -- Router 1 -- Switch 1 -- Server 1 | Router 2/Switch 2 --+-- Server 2 | | | WAP 1 --+ +-- WAP 2 +-- Client 1 | +--

Hi. Contents: 1) Introduction 2) 2 Questions * Introduction: I used this HOWTO to use multiple providers. http://lartc.org/howto/lartc.rpdb.multiple-links.html The box is a load balancer, using the Linux Virtual Server. We have a problem with lost connections, and it seems you get issues when you combine this setup with DNAT [1]. The proposed solution [1] is to use these rules to mark

On 01/15/2017 10:19 AM, Gregory P. Ennis wrote: > It seems apparent to me that a > better way to do what I wanted would be to have two wireless routers, > one wifi being controlled by the dhcpd server that assigns ip addresses > through it to known and trusted connections with one subnet, and the > other wifi router assigning addresses on a different subnet to less > trusted

Hi :-) I'm new to R and I started using it for a project (I'm the CS guy in a group of statisticians helping them find out how to solve issues as they come out). This is my first post to the list and I am starting to learn R. Well, they were used to doing MCA analysis in other programs where the data seems to be preprocessed automatically before running MCA. So, they need to process a

hi, I have a real networks on the eth0 side and real network on the eth1 side. a.a.a.0/24 x.x.x.0/24 <eth0--SNAT-box--eth1:0> y.y.y.2/24 <====> y.y.y.1/24 <===>INTERNET z.z.z.0/24 I want to nat those behind eth0 to go out as y.y.y.0/24 (eth1 is with another address different gw and address, so that i''m using eth1:0 and separate rule&table) I''m currently

Is there any good information on doing WAP/WML/Mobile Internet Access with Ruby on Rails. I''ve tried surfing the web, but couldn''t come up with anything substancial. I would appreciate any input in this regard. Thanks in advance Gopal -- Posted via http://www.ruby-forum.com/.

Hi everybody. We have a problem with the configuration of the card, the cards work and we receive incoming calls but asterisk don't receive dnid. We have 5 servers with 1 E400P with the same problem and the telco told us that we need to configure the card to request it, how we can do this? Can you help me to solve the problem. Best regards, Carlos Fernández Puente carlos.fernandez@alisys.net

Trying to figure out if there's a way to get syslog.conf to direct remote logging from a wireless access point to log to a separate file instead of the main syslog and can't figure out how that could be done from man syslog.conf (or man 2/3 of syslog) this clearly doesn't work 192.168.1.251.* /var/log/WAP-2.log which according to the man page, makes

I recently got a Pulver Innovations WiSIP wireless SIP phone to determine if we want to use them in our organization. Since the WiSIP phone arrived last week, I have had nothing but headaches. I do think I now have the problem narrowed down. I have spent a bulk of my time trying to get the WiSIP to work with a couple of Linksys WAP11 Version 2.2. I have met with no success in getting the WiSIP

On 01/15/2017 09:11 AM, Gregory P. Ennis wrote: > All I can say is that when I looked at the dhcpd.conf examples and read > the man pages as well as the explanations of how dhcpd works, we should > be able to use dhcpd for more than one subnet : You can, provided they're on different physical interfaces. I'm mostly certain you can have two DHCP scopes on one physical

Is it just me, or have there been an excessive number of TCP port 9200 port scans ? Port 9200 seems to be associated with WAP & Lexmark printers, but what else ? I know Tom does not like identification, but most sources seem to resolve to Asia. Is there a new Trojan loose ? An example: Oct 7 19:16:18 mybox kernel: Shorewall:net2all:DROP:IN=eth0 OUT=

Bonjour, J'ai t?l?charg? SciViews Insider que je trouve tr?s convivial. Par contre, je n'arrive pas ? comprendre comment enregistrer un script R en type de fichier R justement. Mes programmes fonctionnent tr?s bien, mais SciViews me propose uniquement de les enregistrer au format txt sous un type de fichier "bloc notes". Comment les enregistrer avec l'extension .R comme le