similar to: tc does''nt limit the bandwidth!

Hello, I have problems with htb. The problem is that when I download any file via shaper with htb, the traffic is very dinamic, it jumps, for example: if i have set ceil = 128kbit the results that it jumps from 112kbps to 144kbps or smth like that maybe its not very bad, but when the traffic drops down to 40kbps or less and then after 1 or 2 seconds jumps to 144kbps, its bad :-( and it is often.

Hello, First of all, I already contacted Martin Devera, the developer of HTB, and he told me to search for help on this mailinglist, thus I am describing my problems here now... I am kind of seriously annoyed by QoS as I have been trying for over 3 years to get it working properly - first I did not understand how it works, then it seemed not to work, then it was working perfectly for half a

Hello good day to all ... this is my setup 1 Linux Wireless Access Point, connected are 4 wireless gateway in which i needed to apply shaping ... ok here is the weird part... clients on each gateway download files from the Acess Point ... a 500 mb file through ftp on gateway 1 which is up to 64 kbps ... the result is from 60-64 kbps speed which is fine ... on gateway 2 which is 128 kbps ... the

please, help, i have build vpn server (suse 9 + poptop), i have managed to implement tc htb in ip-up script, but every client has own ppp interface (ppp0, ppp1, ppp2...), and my idea is to share available bandwidth, not to limit connection, how to build root tc rule, when I have more then one interface?... please any one width experiance regards _______________________________________________

dear All, I'm a new student and my job is too shapping bandwith for our campus faculty network. I want to implement htb with Redhat-9.0 distro. does this distro kernel support htb and tc good ? or i should apply some patch or upgrade kernel ? regards reza

at 1 Jul 2005, I request help about HTB setting because my HTB setting did not work. After days, I found the source code bug lead to problem. My linux kernel is v2.4.17 port for mips by boardcom. boardcom set HZ to 200 in linux/include/asm-mips/param.h. In linux/include/net/pkt_sched.h, SCHED_JSCALE is set to 0 according to HZ=200. When I set SCHED_JSCALE to 13, the problem is solved. Shun

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

Hi all, Can you tell me where is the documentation for the new IFB (implemented in kernels > 2.6.16). Thanks in advance! Nikolay

Hello, I run one of my PCs as my personal router, with iptables+tc to control traffic and be my firewall. In TC, I use a combination of htb, qdisc and sfq (as well as prio) to classify bandwidth. In my current setup, I have 10 classifications of my bandwidth. (Even I admit this is probably more than I need, but at this point I''m still learning, so I''ll just leave them be.)

Hi. I wrote in a reply to a mail on here recently that you can''t set mpu (minimum packet unit) on HTB as you can on CBQ. I''ve just noticed that there is a patch on devik''s site which does mpu and overhead. http://luxik.cdi.cz/~devik/qos/htb/ For dsl users mpu is, for practical purposes going to be 106 - overhead is still variable though, depending on packet size.

My previous message (http://mailman.ds9a.nl/pipermail/lartc/2004q2/012285.html) didn''t generate any replies, so I thought I''d try posting what I''ve done trying to solve my own problem, in hopes that someone will take pity and show me if/where I''m going wrong. Just to recap, I''m trying to accomplish this on my server, which streams RealAudio files

Hello all, I am with a doubt about QoS solution... I have a 4 Mbit backbone coming from the telco I use... This is the link I serve to my clients, so I make this classes: $TC qdisc add dev $DL root handle 1: htb default 60 CLASS="/sbin/tc class add dev $DL parent" $CLASS 1: classid 1:1 htb rate 4096Kbit $CLASS 1:1 classid 1:10 htb rate 256Kbit ceil 3072Kbit burst 15k $CLASS 1:1

Hi, I am trying to setup a shaper for my linux box and I am experiencing some problems. What I am trying to do is priorizing packets on the egress link, therefore I have setup some prio classes etc. The priorizing seem to work but the problem is that the ceil parameter doesnt seem to work on non leafs. This is what stats show: > class htb 1:1 root rate 3000bit ceil 3000bit burst 1602b/8 mpu

Hi, I have a typical configuration for my firewall/gateway box: single network card, with a pppoe connection to the DSL modem. I''m already successfully shaping the uplink (how come that the wondershaper.htb doesn''t use the ceil parameter? It should implement bandwidth borrowing!) but i found the ingress policy a little bit rough. I''d like to keep the traffic categories

Dear All, I''m using the kernel 2.6.6, iproute2-2.4.7.20020116, iptables v1.2.9, and gentoo. I have a leased-line 64 kbps. I can see the counter works in iptables, but in the htb, it doesn''t go to the right class (it always go to the default class). Any help will be appreciated here''s my htb conf #!/bin/bash tc qdisc del dev eth1 root tc qdisc add dev eth1 root

Hello all, I have set my QoS solution and now I am facing a little problem... When I ping to my server it has some lost packages: Estatísticas do Ping para 172.30.0.1: Pacotes: SENDED = 1029, RETURNED = 880, LOST = 149 (14% de perda), Aproximar um número redondo de vezes em milissegundos: Mínimo = 0ms, Máximo = 686ms, Média = 105ms If I disable my QoS ping stats to be ok. I even have

I have some problem with traffic shaping on debian testing. I actually posted a full config on the list a while ago but didn''t get any answers. The problem is that traffic doesn''t get into the user classes (~150) when I associate a class with a qdisc. I tried sfq, fifo but none works. If I dont''t associate a qdisc with a class classification occurs well.

Hi, I''m trying to setup QoS in my TSL box. Following to mailing list reccomendations I changed PSCHED_CPU but can''t get accurate shaping with HTB. I have disabled HYSTERESIS also (by setting it to 0). I have Intel Celeron 1.8Mhz (TSC supported I think). ******** My script ****** tc qdisc add dev eth0 root handle 1: htb default 22 r2q 10 # Class corresponding interface

I am trying to do ingress flow control with htb + imq, and as could be expected it isn''t working well. It works a lot better when I keep the htb ceiling well below what the link can actually carry - I guess because htb gets to throttle the TCP fast start before it causes packets to be dropped. The only problem is wasting all that bandwidth hurts. It occurred to me that the bandwidth

Hi, I have some interesting problem with htb , I set up root class and sub-classess: $TC qdisc add dev eth0 root handle 1: htb $TC class add dev eth0 parent 1: classid 1:1 htb rate 1990kbit ceil 2000kbit $TC class add dev eth0 parent 1:1 classid 1:10 htb rate 190kbit ceil 200kbit $TC class add dev eth0 parent 1:1 classid 1:11 htb rate 1400kbit ceil 1600kbit $TC class add dev eth0 parent 1:1