similar to: Multipath IP Masquerade

Firstly I don''t think this is a shorewall problem, but I suspect shorewall might be able to solve it for me. I''ve posted this so far at http://mandrakeusers.org/index.php?showtopic=18942 I''ve stumble upon a problem that has me stumped I have a multipath router using 2.6.8.1 with patches from here http://www.ssi.bg/~ja/#routes basic setup: ___ ISP1

Okay here is my setup: Gentoo Box running 2.6.4 w/ 4 NICs 1 NIC is for internal network 3 NICs are for external network The machine has a static address assigned to the internal network nic. This nic runs dhcp and dns forwarding. The other 3 nics have external dynamic IP addresses. All will have the same gateway. There are 3 NICs because this is a very large pipe, that will only allocate a

After many many hours of frustration and failures I''m almost to the point that I don''t think this is even currently possible with Linux. With out going in to too much detail, I am effectively wanting to do the following. I want to be able to take traffic in from a local LAN on eth0 and route it out eth1 to a default gateway with a static IP. I want said default gateway

Hi All, I have a linux router, configured with two internet connections and two lan segments. I''ve setup multipath routing as described in http://lartc.org/howto/lartc.rpdb.multiple-links.html My problem (I think) is that somehow the router will randomly choose incorrect routing paths for different hosts, for example: on my workstation (192.168.1.20), I ssh to a server I have on an

First of all i wanna thanks Christoph Simon for the support. Only after his reply to my email i could see the real solution to the problem (Valeu mesmo cara... me ajudou pra caramba! Fico te devendo essa!) :) Here is what i learned in a month of research: I tried A LOT of things to do load balance, including the one at LARTC homepage. The only tutorial that REALLY works in my case is the

Hi, I am new in LARTC list. I had intermediate skills in networking. What I tried to do: Use 2 links with loadsharing + falt toletant (to add bandwitdh) ok ! I am use Debian Etch in router/fw With kernel debian default + routes-2.6.17-12.diff patch The Problem: The iproute2 just route thought the last gateway of nexthop rule. I was running tcpdump in 2 terminals, tcpdump -nni eth0 ...

Greetings from a newbie! (Well, to this list anyway) I''m having a problem and I hope someone here might be able to help... I am strongly expecting an answer along the lines of "upgrade to v2.4.x", but I would REALLY preffer to avoid that for now... The setup: "Home brewed" v2.2.24 (will patch to v2.2.25 later today) with the DS8 patch applied. Currently

Manish Kathuria wrote: > Sandeep Agarwal wrote: >> Manish Kathuria wrote: >> >>Sandeep Agarwal wrote: >> >> >> >> >> >> I have gone through http://www.ssi.bg/~ja/nano.txt AND further >> >> http://www.ssi.bg/~ja/ & got confused in choosing the right patch. >> >> Please suggest if I will choose Jumbo Patch

Don’t mind my previous post – I figured out the issue, I wasn’t properly setting broadcast addresses in the appropriate areas. I rewrote my script to take this into account and it works great now ☺ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hello, I have set up a multipath gateway. System is a linux 2.4.29 kernel, iproute 20010824, iptables 1.2.11. here is the setup: firewall:/# ip rule 0: from all lookup local 100: from all lookup main 152: from all fwmark 10 lookup wan1 153: from all fwmark 20 lookup wan2 201: from 213.223.96.121 lookup wan1 202: from 82.236.230.217 lookup wan2 1000: from

I have a private lan that is connected to the world via 3 dsl lines. I put up a linux box that handles all the dsl lines, lan gateway and all is working well...until...one of the dsl lines goes down. My routing table is: x.x.x.x dev ppp0 proto kernel scope link src x.x.x.x x.x.x.x dev ppp1 proto kernel scope link src x.x.x.x x.x.x.x dev ppp2 proto kernel scope link src x.x.x.x

Hello, We''ve been using Xen on several servers with direct-attached storage for a number of years. Now we''re looking to buy more Xen servers and re-purpose two of the older ones as SANs to hold the domU filesystems, in order to achieve redundancy and live migration ability. I''m looking for comments on our proposed design. SAN 1 - existing server w/ 4 GB, 2x

Hello, I am trying to make a load balance at my box using two conections. I have compile my kernel with this patch routes-2.6.13-12.diff (tha I get from this website: http://www.linuxvirtualserver.org/~julian/#routes). The problem is that when I try to balance using weight sintaxe (i will put the script bellow) some conectios just drop. So I can enter some pages but other I could not...

Hello, On Mon, 17 May 2004, Charles-Etienne.Dube wrote: > I did some tests with 2 cable modems, but now it is installed in a production > environment with 4 cable modems. At first, everything seemed to work fine.. > But now I had a couple of users tell me that some web pages were > not available while others were, and it semms to be a masquerading problem > since when I

Hello, I have finished setting up the load balancer with IPROUTE ... also patch the kernel to support DGD and now it''s working fine with the valuable guide at LARTC website, Julian Anastasov, and the kind people in this mailing list. Now I would like to launch a web server and a ftp server to the public but I''m stuck into a problem and really need your help. Currently internal

Hello, After reading the excellent HOWTO I got traffic shaping working nicely over ethernet devices on a test setup. I can''t put this setup live though, because our main firewall has three 2mbit hdlc interfaces instead of a single device. We are using multipath routing using iproute2 nexthop at the moment, and that works fine for firewalling. But now I have a need for shaping and

Hi! I had two uplinks till today. We stopped one of them today, so i thought i could share my experience. (it is maybe useful for somebody) I hadn''t managed to configure it using a LARTC howto, but the Nano-howto (http://www.ssi.bg/~ja/nano.txt) and julian''s kernel patches. I had some problems with icq connections, because it is a two step connection (It is just theory). 1.

Ok folks, here goes.. I have been boggling with a problem for the past week, and still haven''t found a solution.. I''m trying to route traffic from two providers through a Linux machine. But that is not the problem. The ISP''s have provided me with a WAN IP class for both of the lines, to be routed into a DMZ where the machines a to respond to their respective

Hello, Since I could not figure out my previous problem, let me ask in a different way. I have 3 networks inside my LAN. They are 172.16.55.0/24 , 172.16.56.0/24 and 172.16.57.0/24 respectively. They all use eth0 as an alias. I also have 2 uplinks to different ISPs. One of them is leased line and the other one is ADSL. One of my uplink is 81.8.120.18/30 with gateway 81.8.120.17 on eth1 and the

Hi, I am tring to us ip route to load balance between two interfaces. ip route add equalize 10.200.1.0/24 nexthop via 10.200.0.2 dev neta nexthop via 10.200.0.2 dev neta2 Where neta and neta2 are gre tunnels. Testing show that packets travel in a single sided manner. Do I need to use the multipath (IP_ROUTE_MULTIPATH_CACHED) module? thx jason