similar to: traffic shaping on single ip...

I''ve been following the HOWTO, and reading mailing list discussions about throttling bandwidth, and have had some success, but I just want to tie off some loose ends. Essentially what I am wanting to do is to keep our bandwidth usage below 1megabit, because if we go over we get charged for that traffic. I''ve used some of the examples from the HOWTO to limit our bandwidth, but I

Hi there, i''m trying to shape incoming trafic on my linux box. I want it to depend on the source IP adress of the packets (in fact, i got a VPN on an ADSL link and wanted to get at least/max 64Kbit/s for the VPN) So i tried this : tc qdisc add dev ppp0 root handle 1:0 cbq bandwidth 512Kbit avpkt 1000 cell 8 tc class add dev ppp0 parent 1:0 classid 1:1 cbq bandwidth 512Kbit rate

Hi all, I''m having some problems setting up qdiscs on a bridge.The config looks a little like this: ifconfig ifb0 up # Bring up the IFB for this bridge. tc qdisc add dev eth2 ingress tc qdisc add dev eth3 ingress tc qdisc add dev ifb0 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000 cell 8 # Raw qdiscs on each bridge port tc qdisc add dev eth2 root handle 1:0 cbq bandwidth

I am using a server with asterisk and I am trying to prioritize voip traffick -- I am a newbie at this traffic shaping, so please bear with me. I used the script below and what happens is thatall traffic in the bulk class stops after a couple of minutes. Also, should I include the ports for rtp in the filter statements with the ports 5061 and 4569? Note I have a fairly big pipe -- supposed to

Hi everyone, This is on a linux box, ingress (eth1) at 100Mb/s and egress (eth0) at 10Mb/s. The purpose is to test CBQ Here is my script ------------------------------------------------------------------- # Root qdisc tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 9Mbit \ avpkt 1000 cell 8 # Classes tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 9Mbit \ rate 5Mbit weight

Hello, I''m using tc to limit the bandwidth of our wireless customers. I have a working script, but I''m not happy with it. I''m trying to write a more sophisticated script, but when I run it, it give me this error: RTNETLINK answers: File exists I have no idea what this error means or how to fix it. Here is a portion of the script (the whole script shapes several

Hi all, I have installed 2.4.5 kernel, Debian Potato. my tc script: #!/bin/bash tc qdisc add dev eth1 root handle 20: cbq bandwidth 10Mbit avpkt 1000 echo root tc class add dev eth1 parent 20:0 classid 20:1 cbq bandwidth 10Mbit rate \ 10Mbit allot 1514 weight 1Mbit prio 8 maxburst 20 avpkt 1000 echo class tc class add dev eth1 parent 20:1 classid 20:100 cbq bandwidth 10Mbit rate \ 5Mbit allot

Hi, I managed to fix 128kbit for an IP address of 192.168.200.3 as below: - tc qdisc add dev eth3 root handle 1: cbq avpkt 1000 bandwidth 100mbit tc class add dev eth3 parent 1: classid 1:1 cbq rate 128kbit allot 1500 prio 5 bounded isolated tc filter add dev eth3 parent 1: protocol ip prio 16 u32 match ip dst 192.168.200.3 flowid 1:1 tc qdisc add dev eth3 parent 1:1 sfq perturb 10 How can I

Hello everyone, I''m a newbie experimenting with CBQ shaping and am facing a few problems. Can any of you please help? TEST SETUP: +---------------+ +----------------+ | 10.0.0.103 |----------->| 10.0.0.102 | +---------------+ +----------------+ 10.0.0.103: Linux, 100Mbit/s NIC 10.0.0.102: Windows, 100Mbit/s NIC, iperf tcp server (ports 2000 and 2001) WHAT I

I run a small Linux webserver and NAT router from my cable modem at home. Whenever someone starts an http download, all other traffic from my LAN is starved. Bandwidth is not really an issue, but latency is particularly horrible -- pings that usually come back in 20ms can take up to 600ms while the web server is active! I set up QoS (netfilter+iproute2) on the NAT machine in an attempt to give

Hello, really new to advanced linux routing, but I have managed to setup something that sort of works for my needs. I have a linux box with this configuration: Internet - eth0 - eth1 - many users I''m using a NAT to allow my users Internet access. On some users, I wish to shape their download speeds as to not overload our outside connection. Here is what I do to shape them at 64k

Dear List, Sorry for the dublicated email but I couldn''t get any answer. I am trying to limit some IP blocs with tc with following three step. # interface tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 bandwidth 256kbit # class tc class add dev eth0 parent 1: classid 1:1 cbq rate 64kbit \ allot 1500 prio 5 bounded isolated # rules # download tc filter add dev eth0 parent 1:

Hello there, I''m trying to do some prio qdisc, but it doesn''t seem to work. Can anybody tell me why ??? here is my simple prio qdisc script: OPTIONS="bandwidth 100mbit allot 1514 maxburst 20 prio 3 avpkt 1000" IPTABLES="/usr/local/bin/iptables.static" INTERNAL=eth0 EXTERNAL=eth1 tc qdisc del dev eth0 root 2>/dev/null tc qdisc add dev eth0 root handle

hi all, Iam using the following CBQs to limit the FTP bandwidth pease tell what changes are rquired to make it work.... tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1:0 cbq allot 1514 avpkt 1000 bandwidth 100Mbit tc class add dev eth0 parent 1:0 classid 1:1 cbq allot 1514 bandwidth 100Mbit rate .4Mbit weight .4 prio 2 maxburst 20 cell 8 avpkt 1000 tc class add dev eth0

Hi there, We''re running a small ISP and all the users are shaped to 384/512/768k both ways (whichever package they choose). The router is a linux (debian sarge), the kernel is 2.4.25 right now. All users are getting 10.1.1.* ip addresses (eth1) and eth0 connects to the isp using ethernet (via a media converter, it''s fiber from there). They''re nat''s using

Hi All, I''m trying to do some traffic shaping on an ethernet bridge. Currently, I have the following setup working: ifconfig eth0 down brctl addbr br0 brctl addif br0 eth0 brctl addif br0 eth1 brctl stp br0 off ifconfig eth0 0.0.0.0 up ifconfig eth1 0.0.0.0 up ifconfig br0 up This creates a bridge consisting of eth0 and eth1. So far so good. I now want to use tc to shape traffic

Hello, I want to limit the upload speed for the eth0 Interface for an specific IP. I used the following script, but its only limits the DOWNLOAD speed.But i want to limit both! DEV=''eth0'' tc qdisc add dev $DEV root handle 1: cbq avpkt 1000 bandwidth 768kbit tc class add dev $DEV parent 1: classid 1:1 cbq rate 100kbit allot 1500 prio 5 bounded isolated tc filter add dev $DEV

Hi All, I''m using iptables-1.2.7a on RedHat8 kernel 2.4.20. I wanted to limit the file-sharing traffic to the internet. I marked the packets with iptables: iptables -A FORWARD -t mangle -p tcp -s 192.168.1.1/24 -d ! 192.168.1.1/24 --dport 1024:1862 -j MARK --set-mark 1 iptables -A FORWARD -t mangle -p tcp -s 192.168.1.1/24 -d ! 192.168.1.1/24 --dport 1864:65535 -j MARK --set-mark 1

Hi folks, I read the fantastic LARTC How-to and after that i tried to limit one host in my LAN for both down-and upload bandwidth usage. I took section 15.9. and added uplink-limiting as I understood it from the previous chapters. Unfortunately it doesn''t work. I ran the script and went to the specified PC, started a download, and watched the rate. The rate was always about 2000 kbit/s,

Hi, I''m trying to modify the Wondershaper script so achieve the following. 1. Prioritize traffic to the few IP addresses. 2. Everyone else should get a fair amount of bandwidth The problem I am facing is when I run this script is that the bandwidth seems to get halved. I tried to apply this script to a site where the upstream and downstream were fully saturated. I immediately saw