similar to: tc command failed on 2.4.21 kernel

tc qdisc add dev eth0 root sfq perturb 10 I want to set perturb to 8 then i used this tc qdisc add dev eth0 root sfq perturb 8 system give me the following message RTNETLINK file exists I delete the rule by this :"tc qdisc del dev eth0 root sfq perturb 10" please tell me how can i delete the rule by another way and where is "RTNETLINK file"

Hi, I have a problem with ''tc filter'' on a 2.4.22 kernel from Slackware 9.1 distribution. The tc command binary is from htb3.6-020525.tgz (http://luxik.cdi.cz/~devik/qos/htb) I''m trying the following command sequence: tc qdisc add dev eth0 root handle 1: htb default 1 r2q 1 tc class add dev eth0 parent 1: classid 1:1 htb rate 1200kbit ceil 1200kbit tc class add dev

I downloaded iproute2-2.4.7-now-ss010824.tar.gz and I did patched tc with the htb3.6_tc.diff from htb3.6-020525.tgz and when I try to use a htb script I get just errors. I did not patch the kernel, since I use kernel 2.4.21 and I saw on - HTB Homepage that I need to patch it only if I run version 2.4.20 or earlier. Do also need the kernel patch ? Or maybe is something else wrong? RTNETLINK

Hello.. I have a linux box and I want to make priority on traffic generated by my LAN''s computers.. I don''t have a guaranted bandwidth, so I wanna use sfq... I want to make traffic to port 80 , 443 , 25 & 110 PRIORITY 1 Traffic src or dest 192.168.0.2 to make priority 2 And the rest to put it in proiority 3.. I did the following : tc qdisc add dev eth0 root handle 1:

Hello! I recently upgraded my computer from Mandrake 8.2 to Mandrake 9.0. I used a very slightly modifed WonderShaper and it worked beautifully. But now when I try to run the same cbq shaping script on Mandrake 9.0 i get this output RTNETLINK answers: Invalid argument RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or

I''m using htb classes on my firewall to queue traffic and implement different restrictions on different protocols. tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 190 tc class add dev eth0 parent 1: classid 1:3 htb rate 2mbit burst 30k tc class add dev eth0 parent 1:1 classid 1:90 htb rate 50kbit ceil 384kbit burst 5k tc qdisc add dev eth0 parent 1:90 handle

Hi, I want work out a GUI interface for htb and now here comes to the part about adding and removing classes and filters. Here is an example script. TC="tc" DEV="dev eth1" echo "Add root qdisc, default traffic go to 1:30" $TC qdisc add $DEV root handle 1: htb default 30 echo "Divide the traffic into different classes and levels" # -------- level 1

The manual says (about prio): > Because it doesn''t actually shape, the same warning as for SFQ holds: > either use it only if your physical link is really full or wrap it > inside a classful qdisc that does shape. The latter holds for almost all > cable modems and DSL devices. I want to wrap prio inside of tbf. Here''s why: I have a server on a DSL line, which has

Hi all, Can I give more bandwidth to a specific URL. Regards Abdul Khader __________________________________ Do you Yahoo!? Yahoo! Small Business $15K Web Design Giveaway http://promotions.yahoo.com/design_giveaway/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi guys, I''m new to TC HTB traffic shaping.... I installed it at my first try on my Bearing Leaf Router/Firewall I use the tc -s class show dev eth? To see my output All looks dandy and nice, but it''s figures, of which at current momment looks like French to me, I would like to see exactly what these figures looks like in a GRAPH style... I know I can use MRTG, I do have

Hi All, concerning the problem when running the "ip ru ls" command. I faced with the same problem, and I solved it by making sure to include the following settings into the kernel configuration (2.4.18): CONFIG_IP_ADVANCED_ROUTER=y <=== CONFIG_IP_MULTIPLE_TABLES=y <=== CONFIG_IP_ROUTE_FWMARK=y CONFIG_IP_ROUTE_NAT=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_TOS=y

This is my first attempt at understanding lartc: I want to throttle outgoing bandwidth fo a certain tcp port and leave other traffic the way it was. so I put a prio qdisc at the root of eth0 (dummy priomap since i want to use filters to switch bands): $ tc qdisc add dev eth0 root handle 1: prio bands 2 priomap 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 then attach a tbf qdisc at 1:2 : $ tc qdisc add dev

Hello, i´ve installed a Suse 8.1 minimal System with iproute 2.4.7 and iptables, Suse default Kernel 2.4.19. When I start the Wondershaper 1.1a Script I get the following Error: CBQ: "allot" is required to set WRR parameters. /home/skripte/./wshaper: line 72: allot: command not found CBQ: "allot" is required to set WRR parameters. /home/skripte/./wshaper: line 78: allot:

hi, all i run the following scripts : tc qdisc add dev eth0 handle ffff: ingress tc filter add dev eth0 parent ffff: protocol ip \ pref 4 u32 match ip dst 10.0.0.1 flowid :1 my question is : can i know how many packets are matched by this filter? if i can , what should i do to get this counter value, then. thanks :) _________________________________________________________________ MSN

Dear List, I am a tc newbie, and I''ve been working through the LARTC HOWTO to try to understand how qdiscs, classes, and filters fit together. I was confused by the example in section 9.5.5.1 (see excerpt below). I thought that classes were could only be attached to qdiscs (classful ones). In the example, however, classes are being attached to other classes. Can anybody explain to me

Hi, I am trying to do both ingress and egress bandwidth management on a bridge. eth0 is the WAN interface. IPTraf shows that the following script is running successfully and it limits bandwidth both ways to 256 KB However when I want to see the statistics using tc - it only shows me stats for htb class and not for ingress class. The tc output is as follows: tc -s -d class show dev eth0 class

it is posible to do more than 2048 filter rules and classes like this: /sbin/tc class add dev eth1 parent 1:15 classid 1:101 htb rate 1kbit ceil 6128kbit prio 1 quantum 1500 /sbin/tc filter add dev eth1 protocol ip pref 0 parent 1: u32 match ip dst 10.10.24.17 flowid 1:101 /sbin/tc qdisc add dev eth1 parent 1:101 handle 101: sfq /sbin/tc class add dev eth1

Hello everybody, I try to work with TC for a little while in my study and there still are a few questions that I can\''t find any answer anywhere. Firts about qdisc and classes: - What is exactly the difference between qdsic and class ? They are so \"intimately tied together\" that i\''m not sure not make the difference. Why can\''t we have a qdsic HTB with

I am trying to build iproute2-2.4.7-20010824 from source on a 2.4.24 kernel. I have played a bit with ADDLIB and LDLIBS variables but I always get errors so I suppose it''s best if instead of playing I try to understand what does the following mean (from the README file): ADDLIB should contain inet_* functions, if your libc contains obsolete resolver library (<4.9.4) and you have no

Quick question: How do I delete an ingress tbf? [root@atlas root]# tc qdisc qdisc tbf ffff: dev eth0 rate 50Kbit burst 2999b lat 1us [root@atlas root]# tc qdisc del dev eth0 ingress RTNETLINK answers: Invalid argument _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/