similar to: Scalability

Hi, I found that I had some thinking error with the wshaper script. I assigned the bandwith of my DSL connection to it, but the machine where it runs is normally connected to the LAN with 100Mbit behind a separate Hardware-Router.Obviously, the complete connection of the machine was slowed down to 384k because I told it so.I guess, since wshaper takes only one card as argument, I can''t

Hello there, I''m having lots of problems with my setup here. Let me explain: I am network administrator for my university dorm. We are about 300 users, and we have 2 ADSL connections doing load balancing with 300kbits upstream and 2Mbit downstream. The load balancing is working great, we are doing connection tracking so I can mark and hence prioritize interactive traffic and ACKS

Hi, I''ve a linux as router nat + firewall (POLICY DROP for INPUT OUTPUT and FORWARD) but, I''ve put next rules for p2p software on FORWARD chain [... snip ... ] iptables -F FORWARD iptables -P FORWARD DROP iptables -A FORWARD -p tcp --dport 80 -j ACCEPT iptables -A FORWARD -p tcp --dport 25 -j ACCEPT [... snip ... ] iptables -A FORWARD -m ipp2p --ipp2p -j ACCEPT iptables -A

Hi, I have a setup like this: class 1:1 rate 7600kbit (on a imq device) | |\class 1:10 rate 100kbit ceil 5600kbit prio 7 (here goes p2p traffic) \class 1:12 rate 7500kbit ceil 7600kbit | |\class 1:121 rate 3100 ceil 7500kbit prio 0 |\class 1:122 rate 2200 ceil 7500kbit prio 2 \class 1:123 rate 2200 ceil 7500kbit prio

Im getting into tc. How can I control P2P (peer to peer) traffic??? which filters??? any ideas??? Hugonik

Hi.... I''m trying to setup a LAN router with P2P filter but the problem is that can''t "catch" Ares. There is a way to DROP "ares" p2p packets ? I''ve tried with last "ipp2p" snapshot without sucess... I''ve Kernel 2.4.28 iptables 1.3.0 Various Patches from patch-o-matic-ng-20040621 iproute2-ss020116 IMQ Patch Esfq Patch

Hello, I''ve been trying to shape the bittorrent traffic (on my external interface, upload), but without luck, for this I''m using layer7 filter right now, but I''ve also tried ipp2p, with the same results, I might say that this is not a problem with this packet classifiers, the problem is with HTB, here''s why. When I open azureus (the bittorrent client I

Hey, one more question for ipp2p iptables -t mangle -A DSL-IN -p tcp -m ipp2p --ipp2p -j CONNMARK --restore-mark iptables -t mangle -A DSL-IN -p tcp -m mark ! --mark 0 -j ACCEPT iptables -t mangle -A DSL-IN -p tcp -m ipp2p --ipp2p -j MARK --set-mark 7 iptables -t mangle -A DSL-IN -p tcp -m ipp2p --ipp2p -j CONNMARK --save-mark iptables -t mangle -A DSL-IN -p udp -m ipp2p --ipp2p -j MARK

Hi all I''m new in this list and i hope to lear and to help if possible. But firt i need help :-( I have this messege in my syslog when my classes and qdiscs goes down. Can any one know what does it mean? Thnx in advance. Yannick Arrimadas Bot Oct 14 16:09:27 pototogorri kernel: HTB init, kernel part version 3.17 Oct 14 16:09:27 pototogorri kernel: Unable to handle kernel paging

Hi guys, I want to priorize traffic comming down from internet on my ppp0 int I want port 80 and 21 (and others ) to have preference over P2P traffic, I don''t want to bann P2P just give to it less prio than other more vital services... does anyone know how to do it or where to read on. Thanks in advance

Greetings, I''ve searched, found ftwall, and some other commercial solutions, but am wondering if anyone on this list has any solutions using a linux firewall to block p2p traffic, more specifically Kazaa. Walter Wickersham _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hello, its me again, I won''t stop sending emails to this list, until I solve this problem, I''ve tried several apps to create the right htb rules (even made them my self), but I always get the same results, traffic gets shaped, but I can''t use my bandwidth, and this is weird, because I should be able to, also I keep seeing download being limited too, and that

re I would like to do some firewalling and p2p shaping/limiting on one of the vlans in my network and I was thinking of using linux box as transparent bridged firewall/limiter. For this I''m planning to use AMD64 2.2Ghz box with 2 1gbit NIC (Broadcom 5721), that will be bridged. The box must be totally transparent and unseen in the network, as well as it should have much influence on

Hi! I''m wondering whether anyone has successfully set up a bandwidth control system using ipp2p and shorewall. I have been able to drop connecions altogether, but I don''t seem to be able to get CONNMARK working with ipp2p. Any pointers would be greatly appreciated :) ______________________________ Mario R. Pizzolanti

Hi all, I''m tring to isolate P2P traffic, specifically BitTorrent, for my QoS scripts. I can''t seem to completely isolate ALL BitTorrent traffic. I identify & mark packets and then use tc filters to put them into appropriate classes. My firewall rules (below) do the markings. My VoIP boxes'' and ICMP traffic get highest priority (mark 1). Then comes DNS, SSH,

Hello, I am trying to shape p2p trafik to 256kbps on my dsl line. I wrote this set of commands: DEV=eth2 ip link set imq0 up tc qdisc add dev imq0 root handle 1:0 htb default 21 r2q 2 tc class add dev imq0 parent 1:0 classid 1:1 htb rate 530kbit tc class add dev imq0 parent 1:1 classid 1:20 htb rate 530kbit ceil 530kbit prio 0 tc class add dev imq0 parent 1:1 classid 1:21 htb rate 64kbit

Hi, I appologise for the bad ettiquite of this, but I have tried looking for some HTB examples that would help me, and am having trouble understanding how the tc filters should work, but I can''t figure out why this isn''t working. I''ve written this script, based upon the ultimate traffic shaper at LARTC, to try and shape for me and my 3 housemates. The idea being to

I''m moving to a new place and my new flatmate wants a router because he likes the cleaness of it all in a non geeky way which I can understand. This means it''s going to be hard for me to pursude him to let me run a computer as a router to act as bandwidth cop. But I don''t fancy trying to use ssh, VNC and games while he''s using WindowsUpdate or p2p. So I need

Hello, after spending several hours reading archives, I decided to write new post. I successfully set up packet classification, made some basic HTB setup, made some simple graphical representation from HTB statistics data... BUT, I cannot figure out how to refine HTB to get this behaviour: I need that class "p2p" should be the last one to get some link capacity. If I set both RATE

Hi, I have a typical configuration for my firewall/gateway box: single network card, with a pppoe connection to the DSL modem. I''m already successfully shaping the uplink (how come that the wondershaper.htb doesn''t use the ceil parameter? It should implement bandwidth borrowing!) but i found the ingress policy a little bit rough. I''d like to keep the traffic categories