similar to: PRIO not working?

As seen on my post at: http://www.sveasoft.com/modules/phpBB2/viewtopic.php?p=28112#28112 This works very well... It does NOT work with stable 4.0! sveasoft will be issuing a bug fix for this (4.1) in the near future. Final Rev of working script w/ asterisk support I'm not going to run alchemy on production machines until it is stablish. Remember to set your uplink properly and to set

Hi I have tested with FC3 but iam not able get any good results on that. in the list some one recomend me that > 3.17 HTB should work I saw latest FC4 test2 has the HTB 3.17 with iptables 1.3.0 i have install in my P4 box, and trying to test when iam uploading its working perfect, but when iam downloading its going to default class can some one experinced the same problem below is the my

Hi! I''m using 2.4.17 + htb2_2.4.16.diff now. But I found the tc class show command won''t show the correct infomation like before... I got something like: # tc -s -d class show dev eth0 class htb 1: parent 1: class htb 1: parent 1: class htb 1: parent 1: class htb 1: parent 1: class htb 1: parent 1: class htb 1: parent 1: class htb 1: parent 1: # tc -s qdisc

Actually i gave up, i tried and tried and tried so many times, upgrading software falling back to an old version but it didn''t work, that''s it. i can''t do work together tc with iptables and iproute2 when i mark a packet with iptables tc doesn''t recognize them so it falls at the default leaf of the tc''s tree what i like is to mark packets depending on

With the below script, whenever I ping 10.0.16.10 (which matches the only filter I have), traffic still get''s sent to the default 1:2 class instead of 1:1 and I don''t know why... Any hints? (kernel 2.6.12, iproute2-2.6.15) tc qdisc del dev eth0 root > /dev/null 2>&1 tc qdisc add dev eth0 handle 1: root htb default 2 tc class add dev eth0 classid 1:1 parent 1: htb rate

Hello, I have recently started looking at tc and iptables. I have an htb-queue with two classes 1:10 and 1:20 where 1:20 is the default. Then I use iptables to mark all packets I send out on eth1. I then filter marked packets into class 1:10. I expected all packets sent on eth1 to end up in class 1:10, but some packets still go to 1:20. Did I do it wrong? Thank you for any help. regards, David

Dear All, I''m using the kernel 2.6.6, iproute2-2.4.7.20020116, iptables v1.2.9, and gentoo. I have a leased-line 64 kbps. I can see the counter works in iptables, but in the htb, it doesn''t go to the right class (it always go to the default class). Any help will be appreciated here''s my htb conf #!/bin/bash tc qdisc del dev eth1 root tc qdisc add dev eth1 root

----- Original Message ----- From: Michał Joachimiak To: lartc@mailman.ds9a.nl Sent: Tuesday, July 20, 2004 3:45 PM Subject: HTB - Really Big problem Hello everybody! Since week i dig lists and www and can''t find solution for my problem. I''m using HTB 3.13 kernel 2-4-25 smp iptables 1.2.9. I''ve got situation like this: LAN------Linux Box(routing only)------- Linux

Hello everybody, I am trying to understand the Advance routing and Traffic control. In the examples section of the how to an example script is given. Section 15.8.2 (the ultimate setup for Your internet connection) The example says download is 800 and upload is 220 ###### uplink # install root CBQ tc qdisc add dev ppp0 root handle 1: cbq avpkt 1000 bandwidth 10mbit Maybe I am

With outbound QoS setting in Libvirt XML, libvirt will add a tc ingress qdisc for traffic shaping. Then if you set VLAN tag to that tap device, this qdisc will automatically gone by no reason. Could anyone shed some lights where should I look into? I'm really confused and got no clue here. Thanks! Steps to reproduce -- # virsh start instance-name # virsh dumpxml instance-name ...

Hello all, I have set my QoS solution and now I am facing a little problem... When I ping to my server it has some lost packages: Estatísticas do Ping para 172.30.0.1: Pacotes: SENDED = 1029, RETURNED = 880, LOST = 149 (14% de perda), Aproximar um número redondo de vezes em milissegundos: Mínimo = 0ms, Máximo = 686ms, Média = 105ms If I disable my QoS ping stats to be ok. I even have

Hi all, I have installed 2.4.5 kernel, Debian Potato. my tc script: #!/bin/bash tc qdisc add dev eth1 root handle 20: cbq bandwidth 10Mbit avpkt 1000 echo root tc class add dev eth1 parent 20:0 classid 20:1 cbq bandwidth 10Mbit rate \ 10Mbit allot 1514 weight 1Mbit prio 8 maxburst 20 avpkt 1000 echo class tc class add dev eth1 parent 20:1 classid 20:100 cbq bandwidth 10Mbit rate \ 5Mbit allot

Hi! I''m trying to limit the uplink bandwidth using htb but no packets are overlimit or dropped. :-( My router config: * Linux kernel 2.4.20-pre10 (htb v3.7) with everything built as modules in QoS, iptables in use. * tc binary from htb3.6-020525.tgz * external interface eth0: Internet access, 512 kbit/s uplink speed * internal interface eth1: internal LAN, 100 Mbit/s The hosts in the

Hello all, I am trying to make a filter into my QoS rules and I founded that when I try to use filters u32 and with fwmark they do not work together. This is the filter I use, just and example, for u32: $TC filter add dev $DL parent 1:0 protocol ip prio 1 u32 match ip sport 22 0xffff flowid 1:10 This is working fine. Now if I try to mark a package that I want it to go to the same

Hello! I need to switch from htb2 to htb3, because of speed issues (for me, htb2 is unable to handle more then 100mbit duplex with ~550 classes), kernel profiling shows htb_dequeue_prio at 1st place with 3x isolation. So, I''ve moved from 2.4.19 to 2.4.25 kernel (hi-pac for classification/marking and htb3 for queueing), and traffic rate drop from 100 to 20mbit. What can be wrong? The

I''m trying to shape traffic on a Devil-Linux box. This note was originally sent to their maillist, because the LARTC list appears to have been down for the past few days. My mailbox was just flooded with a half dozen or so confirmation requests in response to my repeated attempts to subscribe to this list. ---------- Forwarded message ---------- From: drew einhorn

Hello all, I am trying to match some conections using u32 but I tryed this: [root@ns1 ~]# tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip src 0/0 match ip dst 0/0 match ip sport 80 0xffff flowid 1:10 RTNETLINK answers: Invalid argument We have an error talking to the kernel [root@ns1 ~]# I have this class at device eth1: [root@ns1 ~]# tc class show dev eth1 class

Hello, I have a problem with simple traffic shapping in shorewall, my current configuration is: zones vlan10 ipv4 # interfaces vlan10 vlan10 detect tcpflags,routeback shorewall.conf TC_ENABLED=Simple tcinterfaces vlan10 Internal 1mbit:50kb shorewall show tc Device vlan10: qdisc prio 5: root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1

I thought I had this all worked out, but it seems not. The following tc configuration: tc qdisc del dev ppp0 root 2> /dev/null > /dev/null tc qdisc add dev ppp0 root handle 1: tbf rate 120kbit burst 1200 limit 1 tc qdisc add dev ppp0 parent 1:1 handle 2: prio bands 3 tc qdisc add dev ppp0 parent 2:1 handle 10: sfq perturb 20 tc qdisc add dev ppp0 parent 2:2 handle 20: sfq perturb 20 tc