similar to: heavy uploads

Hi. I´m making an script for load balancing of two cablemodems internet connections toward my LAN. The problem is that when I try to ''equalize'' the the two internet connections with the weight=1 it doesn´t work. On the other hand, if I put 5 and 5 it works, but not at 100%, it does intermittlently, some times works and others don´t. example: ip route add default equalize\

hi, I''ve a dedicated internet link 512k with a cisco router, and now, I want to upgrade bandwidth with 8 ADSLs (512k each) then: - build kernel 2.4.27 with pachs: - patch-o-matic-ng-20040621 : CONNMARK, H323, etc... - http://www.ssi.bg/~ja/#multigw Julian''s patch. - Activate "equal cost multi path" (Advanced Router-Networking Options) and so on -

Hi all, I''m trying to set up a computer with 2 routes to the internet, much as described at http://lartc.org/howto/lartc.rpdb.multiple-links.html .One of my interfaces (eth5, 192.168.2.2) is only used for traffic originating inside the network. The other (eth1, 192.168.1.2) is only used for a VPN, where all (udp) traffic originates from outside our network. I have created a second

Hi, we have a faxserver with Asterisk, IAXModem and Hylafax. Faxes come from a SIP trunk to Asterisk, then are forwarded throught 5 IAXModems managed with Hylafax. Hylafax users can also send faxes to these modems and Asterisk send them throught the SIP trunk. We also have a dedicated modem used only for sending faxes coming from an Hylafax dedicated user. Sometimes Hylafax reports that a modem

here''s the setup (two dsl - same provider) +-----> link1 LAN----- linux box --| |----------internet +-----> link2 the setup is ok in terms of the failover requirement. the other link takes over when one is down. however, there is a very noticeable lag when both lines are up. i''ve tried changing

Hello! I had found a script to multipath DSL connections: http://linux.com.lb/beta/index.pl?node=Load%20Balancing%20Across%20Multiple%20Links I have made some modifications, but in second part of this mail are some errors: __________________________________________________________________ First the script: __________________________________________________________________ #!/bin/bash #

Ok ive been trying to get this to work for about half a year now. Ive searched all over the internet for a solution for my problem. Ive found some solutions, but they only led me to yet more problems. What we want to do is the following: I live in a student complex with 7 other people. Every room has its own internet connection from the same ISP. Ip, gateway, subnet are asigned through dhcp on

Hello, I hope i wont make it too complicated and sorry for my englihs... The company has multiple connections to the internet ADSL + CABLE + XDSL... and i only want to use two for load balancing for now. I have read the HOWTO and i got it up and working it works great but i still have a few questions if anyone could help! the setup is: ADSL on ETH0 and CABLE on ETH1 When i load balance on

Hi All, I''ve got server with one LAN card eth0 ip=10.0.0.5 default access t ointernety done through ADSL router gw 10.0.0.1 we got second internet access through another ADSL router gw 10.0.0.2 I want to send all e-mail out through gw 10.0.0.2 How it can be done? I''ve tried to mark packets: iptables -t mangle -A OUTPUT -p tcp --dport 25 -j MARK --set-mark 0x1 and ip ru add

Hi folks, Has anyone tested the changes to multiple ISPs/load balancing or routestopped in 2.4.0-RC1 yet? We need to talk about what criteria we will use for determining whether 2.4.0 is ready for release. I''ve started configuring a firewall at work with the multiple ISPs support, but its kernel doesn''t have connection marking support, so it''s going to be a couple of

I switch to lollipop 4 months ago and I never had issue. So for my opinion it is ready for daily use. Before try tinc I had my vpn implemented with openvpn, and it works great on lollipop. I switch to tinc because i prefer a mash vpn topology versus a client/server topology. -- Andrea Squeri Inviato con Sparrow (http://www.sparrowmailapp.com/?sig) Il giorno venerd? 27 marzo 2015, alle ore

Woops - my fat fingers hit the send key before I could put in a subject a minute ago. Hello - I am using kernel 2.4.27 and running into behavior I don''t know how to explain. I have 2 relevant interfaces. eth0 is external, eth1 is internal. My internal LAN is 10.10.10.0/24. My External range is 1.2.3.0/27 (dummied up). I have an H.323 videoconference device inside my internal

Hi, I have the following situation: 1 gateway box with 2 WAN interfaces (eth1 and eth2). 1 LAN interface eth0 default gateway is eth2 I want to route all traffic with destination protocol tcp 22 (ssh) NOT over the default gateway eth2 but force them to find it''s route over eth1. All other traffic must go the normal way over eth2. Is this possible with tc or an other tool? --

Hello i''m having some issues trying to match packets using iptables mark, iproute filter and tc filter.- i mean, when i do iptables -t mangle -A INPUT -p tcp --dport 80 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -p tcp --dport 25 -j MARK --set-mark 10 iptables -t mangle -A FORWARD -p tcp -i eth0 -o eth1 --dport 25 -j MARK --set-mark 10 $TC qdisc del dev $INET_IFACE root $TC

Thanks for reply.. I'll try and then i'll advise you if it woks Andrea Squeri Il 30/mar/2015 11:38 "Vil Brekin" <vilbrekin at gmail.com> ha scritto: > Hi there, > > I've finally had a deeper look and found the Lollipop routing issues root > cause: Lollipop uses several routing tables instead of the default one for > previous Android versions. The main

Hello, I have set up a multipath gateway. System is a linux 2.4.29 kernel, iproute 20010824, iptables 1.2.11. here is the setup: firewall:/# ip rule 0: from all lookup local 100: from all lookup main 152: from all fwmark 10 lookup wan1 153: from all fwmark 20 lookup wan2 201: from 213.223.96.121 lookup wan1 202: from 82.236.230.217 lookup wan2 1000: from

Hello, people. I read iptables tutorial and lartc, but i''m still confused with one trouble. May be this question was discussed already, so forward me solution, if is. So, there''s a trouble. I have debian etch linux. 2.6.18-4 kernel. On this computer i have three interfaces: eth0 - my lan, eth1, eth2 - providers. By default all internet traffic routed through eth2. But i

Hello, I''m following this HOWTO http://linux-ip.net/html/adv-multi-internet.html to route outgoing SSH from a secondary ISP. I can see using tcpdump,jnettop,iftop that when one of the computers located in my internal network is trying to SSH to a box online using SSH, packets are routed via the secondary internet ethernet card. However, packets don''t seem to know how to get back.

----- Original Message ----- From: "Jerry Vonau" <jvonau@shaw.ca> To: "Mailing List for Shorewall Users" <shorewall-users@lists.shorewall.net> Sent: Thursday, August 19, 2004 08:06 Subject: Re: [Shorewall-users] Two Links and DNAT > > > > Btw, by "shorewall show nat" I just noticed that I was doing snat only > > for packets comming

Hi, I have established two connections to the same ISP. After that ip route list showed this: 195.14.247.94 dev ppp0 proto kernel scope link src 81.173.141.207 195.14.247.94 dev ppp1 proto kernel scope link src 81.173.237.84 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.1 default via 195.14.247.94 dev ppp0 I want 192.168.0.2 to connect to the internet by ppp1 and all