similar to: Limiting speed of individual TCP sessions ?

Hi, I''ve been wondering if anyone has thought of a way to differentiate between an established http download and interactive http traffic? I would like to give interactive http traffic priority over someone downloading large files. Has anyone any ideas how to detect packets that are part of a download like this? Thanks. _______________________________________________

Hi all I am using a pass trhu router and I need to QoS some clients output by its IP address. The problem is that QoS is due after NATing. Is there some clever way of doing this besides MARKing every packet with some IP hashing in POSTROUTING NAT table? Regards Ethy

Hi, I have a typical configuration for my firewall/gateway box: single network card, with a pppoe connection to the DSL modem. I''m already successfully shaping the uplink (how come that the wondershaper.htb doesn''t use the ceil parameter? It should implement bandwidth borrowing!) but i found the ingress policy a little bit rough. I''d like to keep the traffic categories

Hello! I''ve put some questions on this list some weeks ago and I''ve got good answers. Thank you! Now I''ve finished my (beautyful) script and I ran it on my router... About my script: It routes packages based on their destination on the Internet. I have about 1650 preffered destination networks listed in some file. The script read this file and marks every package for

Hello List, I''m new to QoS/tcng/HTB and friends, so please forgive me if my question might be silly... After having read lots of HowTo documents I''m totally confused... The Challenge: ============== I''ll have to deploy several "mirror" download servers (Linux) which must be able to handle a huge number of HTTP download requests (about 10k to 20k unicast

I have a requirement which I guess it is not too unusually, however I haven''t quite figured out how to do it and couldn''t find any examples which handle that. I have made myself a Linux-based bridge, eth0 bridged with eth1 to form br0. In this bridge, I run ''tc'' script to handle QoS. So far nothing unusual. However, what''s different is that this

To stress the urgency and importance of my questions, I am willing to pay $100 to the first person that can provide me with the scripts/ rules that will work in my SnapGear firewalls that will solve the problems I am having. Please see the following post: Linux QOS and prioritization of real-time data (RTP/VoIP) Thank you!

Does anyone have any pointers on how other people have implemented tcp window adjustment to do bandwidth shaping? Granted the basic idea is to set the window size to be RTT * bandwidth, but a quick squiz at google turns up mostly papers on how to implement this at the sender end with a view to some new magic TCP implementation. I''m really interested in notes on how to implement at

Hi, After reading section 9 of LARTC it seemed to me that a pure TOS based QoS setup with be sufficient for a small newtork. Interactive packets could have the highest priority, second highest for DNS and small HTTP packets and lowest prio for all others. The advantage is that, the setup would be simply a couple of iptables lines, because the default pfifo_fast qdisc already implements

Hello - What I want to do seems very simple - I want to make sure any H.323 traffic gets processed before anything else entering or leaving this network. The network has a videoconferencing device on the LAN at 192.168.16.4. A Linux firewall NATs an external IP Address to this internal address and I have appropriate SNAT and DNAT rules that work. The NAT and connection tracking rules all work

Hello all, Please could someone help me with this, I have been trying for days to get this to work. I would like to have BE, AF & EF classes with HTB qdisc. I can''t find any scripts online where this has been done. If I enable this filter: #tc filter add dev eth0 parent 2:0 protocol ip prio 1 \ #tcindex mask 0xf0 shift 4 pass_on then BE & AF classification seems to be fine but

Hello everybody. I would like to do some kind of shaping inside an ipsec tunnel implemented by Openswan and linux 2.6.18.x with xfrm (no KLIPS): for example, to limit outbound smtp traffic inside the tunnel. Question: where should I attach the qdisc to? Eth0? I''m asking this, because tcpdump only see the ESP packet on the eth0 and not the ''clear'' packet. TIA This is my

Hi, I am working on linux 2.6.16.I tried to prioritize traffic using prio module but its not working well.It always maps to same class irrespective of ToS.Is it possible to fix it using filters?Anybody fixed this problem? -- Regards Archana Rajagopal _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Hello all, I am trying to make a filter into my QoS rules and I founded that when I try to use filters u32 and with fwmark they do not work together. This is the filter I use, just and example, for u32: $TC filter add dev $DL parent 1:0 protocol ip prio 1 u32 match ip sport 22 0xffff flowid 1:10 This is working fine. Now if I try to mark a package that I want it to go to the same

Dear all, I know this is not imq mailing list. But many of the users over here have done exactly what i want. Requirement:- I want to tight bound eth1 for 100 kbps but after i want to create many classes of 64 kbps or 50 kbps and others. But the total sum of classes is more than 100 kbps so my eth1 is not restrciting total bandwidth at 100kbps. According to search on google imq is the solution.

Hello all, this is my first post here. Sorry for my english. Gentoo LAN router, 2.4.26-hardened-r2 There are 2 WAN links, one LAN link. I am doing some iptables/routing/tc magic in my scripts. What''s interesting is marking packets traveling from all IP''s in LAN. Interesting commands are: ------------- for ip in `seq 50`; do $IPTABLES -t mangle -A FORWARD -o eth2 -d

I try to shape traffic using HTB and mark packets within iptables using PREROUTING. But the filterrules seems to ignore the marks set with PREROUTING Only POSTROUTING marks are accepted. First my configuration I have a router connected to the internet via ADSL over interface ppp0. eth0 is a tunnel to ppp0 and eth1 serves the LAN. LAN is 192.168.57.0/24 on 10Mbit ppp0 is 80.126.16.44 on

I was trying to install iproute2-2.2.4. I get an error when i run the makefile. I get a parse error in /usr/include/arpa/inet.h. Can someone help me? Thanks. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi, I''m trying to configure QoS on my linux in the following manner: I have a main link with 64K, so I divided it in 3 classes of 18K, 14K and 9K with an excess (not used for classified traffic, just to be shared) of 23K. This excess should be distributed proportonally among the 3 classes, that is, the class that has more rate should borrow more bandwidth. What is happening is

Hi all, Here is something that i still haven''t understood. When installing PRIO, it creates 3 "classes" with priority level according to the TOS. That command line : # tc qdisc add dev eth0 root handle 1: prio give that result : # tc qd sh qdisc prio 1: dev eth0 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 How should i read that priomap, what does it mean and how to